Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
side first, matching the polarities shown below. Notes on using the remote With normal use, the batteries should last for about 6 months. Do not mix an old battery with a new one or mix different types of batteries. If you do not use the remote for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion. .. . Setting the clock 1 Press ... . to turn on the system. 2 Press and hold SHIFT . and TIMER MENU . to select the clock set mode. If “PLAY SET” flashes, press ./. . repeatedly to select “CLOCK,” and then press (enter) .. 3 Press ./. . repeatedly to set the hour, then press (enter) .. 4 Use the same procedure to set the minutes. Note The clock settings are reset when you disconnect the power cord or if a power failure occurs. To display the clock when the system is off Press DISPLAY .. The clock is displayed for about 8 seconds. . Antennas Find a location and an orientation that provide good reception, and then set up the AM antenna. Keep the antenna away from the power cord to avoid picking up noise. 4-423-934-71 (1) Micro HI-FI Component System GB Operating Instructions ©2012 Sony Corporation Printed in China CMT-V10iP To tune in to a preset radio statio n To change the play mode If the sound source is set to an FM/AM station for a .WMA files in Windows Media Audio Lossless and iPod/iPhone If you registered a radio station to a preset number 1 Press PLAY MODE . repeatedly while the player is Adjusting the sound timer, the system automatically turns on 15 seconds Professional format cannot be played back. to 6, the radio station will be tuned in by just pressing stopped. You can select Normal Play mode (playback before the preset time. If the sound source is set There is no sound. .USB device formatted with file systems other than the TUNER MEMORY NUMBER (1 to 6) . when the in sequence of all files on the USB device), Folder To Press to CD/USB, the system automatically turns on .Make sure the iPod/iPhone is connected securely. FAT16 or FAT32 are unsupported.* Specifications Precautions Amplifier section system function is set to AM or FM. Play mode (“FLDR” for all files in the specified folder Adjust the volume VOLUME +/... 30 seconds before the preset time. If the sound source .Make sure the iPod/iPhone is playing music. .In case multiple partitions exist in USB device that is Discs that this system CAN play Power output (rated): 4 watts + 4 watts (8 ohms at 1 kHz, 1% THD) on the USB device), Shuffle Play mode (“SHUF” or is set to iPod/iPhone, the system automatically turns . being used, files may not be played back. . Continuous RMS power output (reference): 5 watts + 5 watts (8 ohms at If you registered a radio station to a preset number 7 Generate a more BASS BOOST .. Make sure the iPod/iPhone is updated with the latest Audio CD 1 kHz, 10% THD) “FLDR SHUF” for folder shuffle), or Program Play mode on 30 seconds before the preset time. software. If not, update the iPod/iPhone before using .The system can play back to a depth of 9 folders only. .CD-R/CD-RW (audio data/MP3 files) or higher, press TUNING MODE . repeatedly until dynamic sound Input (“PGM”). with the system. .Files that are encrypted or protected by passwords, etc. “PRESET” appears then press +/.. repeatedly to Set the sound SOUND EFFECT . repeatedly To check the setting AUDIO IN (stereo mini jack): Sensitivity 900 mV, impedance 47 kilohms cannot be played back. Discs that this system CANNOT play select the desired preset number. Note on the play mode effect until desired sound effect is .Adjust the volume. CD player section When you turn off the system, the selected Shuffle Play mode 1 Press and hold SHIFT . and TIMER MENU .. .Files with copyright protection (Digital Rights .CD-ROM System: Compact disc and digital audio system displayed. (“SHUF”) is cleared and the play mode returns to Normal Play mode. The sound is distorted. Management) cannot be played back by this system. .CD-R/CD-RW other than those recorded in music CD Laser Diode Properties Each time you press this button, 2 Press ./.. repeatedly to select “SELECT,” and then Emission Duration: Continuous .Make sure the iPod/iPhone is connected securely. * This system supports FAT16 and FAT32, but some USB device format or MP3 format conforming to ISO9660 Level Notes on Shuffle Play mode press .. Laser Output*: Less than 44.6 .W sound effects are displayed in may not support all of these FAT. For details, refer to the operating Playing the iPod/iPhone .When Shuffle Play mode is set to “SHUF,” the system shuffle-plays .Turn down the volume. 1/Level 2, Joliet * This output is the value measurement at a distance of 200 mm from the the order “ROCK” . “POP” . 3 Press ./.. repeatedly to select “PLAY SEL,” and instructions of each USB device or contact the manufacturer. objective lens surface on the Optical Pick-up Block with 7 mm aperture. all audio files on the USB device. When Shuffle Play mode is set to .CD-R/CD-RW of poor recording quality, .Set t...