Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
6 Press TAPE X. Press TAPE X, and then start playing the desired source. Tape To stop recording Press TAPE x. Tip For recording manually: To pause recording, press TAPE X. continued 13GB Recording to a tape (continued) Recording CD tracks in your favorite order –– Program Edit 1 Load a recordable tape into the cassette holder. 2 Load a CD onto the disc tray. 3 Press FUNCTION repeatedly until “CD” appears in the display. 4 Press PLAY MODE (or TUNING MODE/ PLAY MODE on the remote) repeatedly until “PGM” appears in the display. 5 Press CD ./> repeatedly until the desired track number appears in the display. 6 Press PLAY MODE (or TUNING MODE/ PLAY MODE on the remote). The selected track is programmed. The selection number appears in the display. To program additional tracks, repeat steps 5 and 6. 7 Press CD SYNC. The tape stands by for recording and the CD stands by for playback. “ ” and “B” (or “b”) appear, and the CD SYNC indicator lights up. To start recording on the side facing away from you, press TAPE Y until “ ” changes to “ .” 8 Press DIR MODE on the remote repeatedly to select “ ” to record on one side of the tape, or “ ” or “ ” to record on both sides. 9 Press TAPE X. To Do this Stop recording Press TAPE x. Cancel Program Press PLAY MODE (or Edit TUNING MODE/PLAY MODE on the remote) repeatedly until “PGM” disappears from the display. To place a specific number of tracks on each side of the tape during CD Synchro Recording 1 Program the tracks for the first side by doing steps 1 to 6. 2 Press X on the remote. 3 Program the tracks for the other side by doing steps 5 and 6. 4 Do steps 7 to 9 (see Note below). When the X command is detected during CD Synchro Recording, the CD will pause, the first side of the tape will continue running till it ends, the tape will reverse direction, the CD will play and recording of the remaining tracks will resume on the other side of the tape. Note To enable two-sided recording, you must select “ ” or “ ” in step 8 on the left. Timer-recording radio programs To timer-record, make sure that you have set the system clock correctly (see “Setting the clock” on page 7) and preset the radio station (see “Presetting radio stations” on page 9). 1 Tune in the desired preset radio station (see “Listening to the radio” on page 11). 2 Load a recordable tape. 3 Press TIMER SET on the remote. 4 Press ./> on the remote repeatedly until “SET REC” appears in the display. “SET REC” scrolls and “c REC” appears in the display. 5 Press ENTER on the remote. “ON TIME” appears, then the hour indication flashes. 14GB Sound Adjustment Sound Adjustment 6 Set the starting time. Press ./> on the remote repeatedly to set the hour, then press ENTER on the remote. The minute indication begins flashing next. Press ./> on the remote repeatedly to set the minute, then press ENTER on the remote. “OFF TIME” appears, then the hour indication flashes again. 7 Set the stopping time by repeating step 6. The start time, the stopping time, “TUNER”, and the preset station appear in turn, then the original display returns. 8 Press @/1 to turn off the system. When the recording starts, the volume level is automatically set to the minimum. To Do this Check the settings Press TIMER SELECT on the remote repeatedly until “c REC” appears in the display. The preset items appear in turn. Turn off the timer Press TIMER SELECT on the remote repeatedly until “c REC” disappears from the display. Tip Once you set the timer, the time settings will remain in the system’s memory until you change them, even when you turn the system or the timer off. The settings that were last used will be in effect when you turn the timer on again. Notes • The system will turn on 15 seconds before the specified starting time. • If the system is turned on at the specified starting time, recording will not occur. • When you have set the Sleep Timer, the timer recording will not operate until the Sleep Timer Function is turned off. • You cannot operate the Daily Timer and the timer recording at the same time. Adjusting the sound Generating a more dynamic sound (Dynamic Sound Generator) Press DSG. To cancel the DSG, press DSG again. Adjusting the bass Turn BASS. You can adjust the bass. Adjusting the treble Turn TREBLE. You can adjust the treble. Sound Adjustment 15GB Display Other Features Display Other Features Using the display Checking the remaining time (CD) Press DISPLAY on the remote during play. Each time you press the button, the display changes cyclically as follows: Current track number and elapsed playing time of the track t Current track number and remaining playing time of the track* t Remaining playing time of the entire CD t Clock display * “– – –.– –” appears when you check the remaining playing time of a CD track whose number is 25 or over. Checking the total playing time (CD) Press DISPLAY on the remote in stop mode. Each time you press the button, the display changes cyclically as follows: Total playing time t Clock display t Curre...