|
Anleitung Zusammenfassung
Pause (Deck B only) Press X. Press again to resume playback. Fast-forward Press M or m. Rewind Press m or M. Remove the cassette Press A EJECT Z (or Z B EJECT). Adjust the volume Turn VOLUME (or press VOL +/– on the remote). To search for the beginning of a track (AMS) Press M to search forward or m to search backward when playing the front side (or vice-versa when playing the reverse side). When you use the remote, AMS . or >. The search direction, + (forward) or – (backward), and number of songs being skipped (1 - 9) appear in the display. Example: searching forward 2 songs Tips • Pressing H or h while the system power is off automatically turns on the system and starts tape playback if there is a tape in the deck (One Touch Play). One Touch Play is not available in Power Saving mode. • You can switch from another source to the tape deck by pressing H or h (Automatic Source Selection). • You can fast-forward or rewind the tape, regardless of the selected source. • When you want to reduce the hiss noise in low- level, high-frequency signals, press DOLBY NR so that “DOLBY NR B” appears in the display. Notes •The deck stops automatically after playing both sides five times. •The AMS function may not operate correctly under the following circumstances: – When the unrecorded space between songs is less than 4 seconds long. – If completely different information is recorded on the left and right channels. – When there are continuous sections of extremely low level or low frequency sound (like those of a baritone sax). – When the system is placed near a TV. (In this case, we recommend moving the system farther away from the TV or turning off the TV.) Basic Operations Recording from a tape — High-speed Dubbing You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. ?/1 (Power) x x 3 142 1 Press A EJECT Z and Z B EJECT and insert a recorded tape in deck A and a recordable tape in deck B. With the side you want to play/record on facing forward 2 Press H SPEED DUB. Deck B stands by for recording. 3 Press DIRECTION repeatedly until g appears to record on one side, or j (or RELAY) to record on both sides. 4 Press X. Dubbing starts. When dubbing ends, decks A and B automatically stop. To stop dubbing Press x on deck A or B. Tips • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • You don’t have to set DOLBY NR, since the tape in deck B is automatically recorded in the same state as the tape in deck A. Notes • If you set DIRECTION to j, when the tapes you use have different lengths, the tape in each deck reverses independently. If you select RELAY, the tapes in both decks reverse together. • You cannot record the surround effect. The CD Player Using the CD display tttttttttIn stop mode In the program mode when there is a program tThe last track number of the program and the total playing time TOC (Table Of Contents) information of the current disc Clock display (for a few seconds) Effect (P FILE) name or “EFFECT ON/ OFF” In other conditions The current disc number Disc title* The artist information* Total number of tracks and total playing time Clock display (for a few seconds) Effect (P FILE) name or "EFFECT ON/ OFF" You can check the remaining time of the current track or that of the CD. When a CD TEXT disc is loaded, you can check the information stored on the disc, such as the disc titles or artist names. When the system detects CD TEXT discs, “CD TEXT” appears in the display. DISPLAY , Press DISPLAY. Each time you press this button during Normal Play or in stop mode, the display changes as follows: During Normal Play tElapsed time on the current track t * With CD TEXT discs only (certain characters cannot be displayed). When the CD contains more then 20 tracks, CD TEXT is not displayed from track 21 on. Notes • The display may not show all the characters depending on the disc. • This player can only display the disc titles, track titles and artist names from CD TEXT discs. Other information cannot be displayed. • If a title or name has more than 12 characters, the Remaining time on the current track first 12 characters will light up after the title or t name scrolls by in the display. Remaining time on the current CD (1 DISC mode) or “--.--” (ALL DISCS mode) Track title* tt Clock display (for a few seconds) t Effect (P FILE) name or “EFFECT ON/ OFF” Playing CD tracks repeatedly — Repeat Play This function lets you repeat a single CD or all CDs in Normal Play, Shuffle Play, and Program Play. PLAY MODE REPEAT , Press REPEAT repeatedly during playback until “REPEAT” appears in the display. Repeat Play starts. The following table describes the various repeat modes. To repeat Press All the tracks on PLAY MODE repeatedly the current CD until “1 DISC” appears in the display. All the tracks on PLAY MODE repeatedly all CDs until “ALL DISCS” appears in the display. Only one track...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - LBT-LX30 (965.32 kb)
Stereoanlage - LBT-LX5 (965.32 kb)
Stereoanlage - LBT-LX6 (965.32 kb)
Stereoanlage - LBT-LX7 (965.32 kb)