Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
.The USB device is not connected correctly. Turn off the system, then reconnect the USB device. There is noise, skipping, or distorted sound. .Turn off the system, then reconnect the USB device. .The music data itself contains noise, or the sound is distorted. Noise may have entered during the transfer or recording process. Delete the file, and try transferring or recording again. The USB device cannot be connected into the (USB) port. .The USB device is being connected backwards. Connect the USB device in the correct orientation. 0GB “Reading” is displayed for an extended time, or it takes a long time before playback starts. “Reading” is displayed for an extended time, or it takes a long time before playback starts. Erroneous display .Send the music data to the USB device again, as the data stored in the USB device may have been corrupted. .The character codes that can be displayed by this system are numbers and alphabet only. Other characters are not displayed correctly. The USB device is not recognized. .Turn off the system and reconnect the USB device, then turn on the system. .Check information on the websites about compatible USB devices that can be connected to this system (page 22). .The USB device does not work properly. Refer to the USB device operation manual for how to deal with this problem. If the problem persists, contact your nearest Sony dealer. Play does not start. .Turn off the system and reconnect the USB device, then turn on the system. .Check information on the websites about compatible USB devices that can be connected to this system (page 22). .Press . (or .. on the unit) to start playback. Play does not start from the first track. .Set the play mode to Normal Play mode. Files cannot be played back. .The audio file does not have the extension “.mp3”, “.wma”, “.m4a”, “.3gp” or “.mp4.” .The data is not stored in MP3/WMA/ AAC format. .USB storage device formatted with file systems other than FAT16 or FAT32 are unsupported.* .Playback is possible up to 8 levels. . The number of folders has exeeded 1000. .The number of files has exceeded 3000. Additional Continued . 1GB .Files that are encrypted or protected by passwords, etc. cannot be played back. * This system supports FAT16 and FAT32, but some USB storage devices may not support all of these FAT. For details, see the operation manual of each USB storage device or contact the manufacturer. Tuner Severe hum or noise, or stations cannot be received. (“TUNED” or “STEREO” flashes in the display.) .Connect the antenna properly. .Find a location and an orientation that provide good reception, and then set up the antenna again. .Keep the antennas away from the power cord and the USB cable to avoid picking up noise. .Turn off nearby electrical equipment. “TUNED” does not appear in the display (DAB only). .Check all antenna connections, then perform the DAB Automatic Scan procedure (see “Reception of DAB radio station (CMT-Z100DiR only)” (page 14)). .The current DAB service may not be available. Press +/. (or TUNE +/. on the unit) to select a different service. .If you have moved to another area, some services/frequencies may have changed and you may not be able to tune into your usual broadcast. Perform the DAB Automatic Scan procedure to re-register the contents of broadcasts. (Performing this procedure clears all previously stored presets.) To change the AM tuning interval (Latin American model only) The AM tuning interval is factory-preset to 9 kHz (or 10 kHz for some areas). Use buttons on the unit to change the AM tuning interval. 1 Tune in any AM station, and then turn off the system. 2 While holding down FUNCTION +, press .... All the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure. To reset the system to factory settings If the system still does not operate properly, reset the system to factory settings. Use buttons on the unit to reset the unit to its factory default settings. 1 Disconnect and reconnect the power cord, and then turn on the system. 2 Press DSGX and ./. for about 3 seconds. All user-configured settings, such as preset radio stations, timer, and the clock, are deleted. 42GB Messages Messages Can’t Play You tried to play a disc that this system cannot play. Complete! .The radio preset operation ended normally. .The audio file or folder on the USB device has been erased. .The DAB Automatic Scan ended normally. Data Error You tried to play a file that is not playable. Device Full! The USB device is full. Erase Error! Erase of audio files or folders on the USB device failed. Error The USB device could not be recognized or an unknown device is connected (page 22). Fatal Error! The USB device has been disconnected while transferring, recording, or erasing audio files or folders on the USB device. FLDR Full The number of folders on the USB device has reached the maximum. LOCKED The system does not eject the disc. Contact your nearest Sony dealer. No Device The USB device is eithe...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - CMT-Z100DIR (409.7 kb)