Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Select . (or RELAY) to record on both sides. 5 Press PAUSE. Recording starts. 6 Start playing the source to be recorded. To Press Stop recording p. Pause recording PAUSE. Tips • If you want to record from the reverse side, press TAPE B 9 to light its indicator after pressing REC in step 3. • When recording from a CD, you can use the jog dial to select tracks during rec pause mode (after pressing REC in step 3 and before pressing PAUSE in step 5). Recording CDs by specifying track order — Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. TAPE B (p 5 432 PLAY MODE CHECK =+ ( Pp0( () continued Recording CDs by specifying track order (continued) 1 Follow steps 1 to 6 in “Programming the CD tracks” (see page 25). 2 Press § and insert a blank tape into deck B. 3 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback. The indicator on TAPE B ( (for front side) lights up. 4 Press DIRECTION repeatedly to select A to record on one side. Select . (or RELAY) to record on both sides. 5 Press PAUSE. Recording starts. To stop recording Press p. To check the order Press CHECK on the remote repeatedly. After the last track, “CHECK END” appears. To cancel Program Edit Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. Selecting tape length automatically — Tape Select Edit You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing over 20 tracks. 1 Place a CD on the disc tray. If the indicator for the tray you want to record is not lit green, press DISC SKIP/ EX-CHANGE repeatedly so that it lights green. 2 Press FUNCTION repeatedly until “CD” appears in the display. 3 Press EDIT once, so that “EDIT” flashes. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively. Note You cannot use this function after programming. In order to use this function, you must first cancel the program by pressing PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. Sound Adjustment Sound Adjustment Adjusting the sound You can reinforce the bass, create a more powerful sound, and listen with headphones. PHONES GROOVE DBFB To reinforce bass (DBFB) Press DBFB*. Every time you press the button, the DBFB level display changes as follows: nDBFB NORMAL (DBFB ) Notes • With some songs, the music will sound distorted when you use the DBFB system with the sound effect if the bass is too strong. Set the DBFB to “NORMAL” or “OFF”, or cancel the sound effect (see page 30). • Cancelling GROOVE sets DBFB to “DBFB ” and return to the previous equalizer curve. To cancel the DBFB level, press DBFB until the indication disappears. To listen through the headphones Connect the headphones to PHONES jack. No sound will come from the speakers. nn DBFB HIGH (DBFB ) DBFB OFF (off) * DBFB = Dynamic Bass Feedback For a powerful sound (GROOVE) Press GROOVE. The volume switches to power mode, DBFB is automatically set to full strength, the equalizer curve changes, and the “GROOVE” button lights up. Press GROOVE again to return to the previous volume. Selecting the audio emphasis The audio emphasis menu lets you select the sound characteristic according to the sound you are listening to. DISPLAY FILE SELECT /Press FILE SELECT repeatedly until the effect (ROCK, POP, JAZZ or DANCE) you desire appears in the display. To cancel the effect Press FILE SELECT repeatedly until “FLAT” appears in the display. Tip “SUR ” appears if you select an effect with surround effects. To change the spectrum analyzer display Press DISPLAY repeatedly to select one of the displays below. Pattern 1 VOLUME ALL DISCS . (Changes with music) Pattern 2 VOLUME ALL DISCS . Note The spectrum analyzer display changes each time you cycle through the information display (i.e., function nclock neffect). Selecting surround effects You can enjoy surround effects. DSP =+ ( Pp0( () /Press DSP repeatedly to select the surround effect you desire. SURROUND ON: Reproduces stereo sources in surround sound. HALL: Reproduces the acoustics of a concert hall.* THEATER: Reproduces the acoustics of a movie theater.* ENHANCED THEATER: Reproduces the acoustics of a large movie theater.* DSP OFF: Turns off the DSP mode. * The indicator on the front panel’s DSP button lights up. Note When you choose other sound effects, the surround effects will be canceled. Enjoying Dolby Pro Logic Surround sound You can enjoy the Dolby Pro Logic Surround sound of videos that are Dolby Surround encoded (q). Complete the setup and adjustments first (see page 5). DOLBY PROLOGIC PRO LOGIC ON/OFF =+ ( Pp0( () /Press DOLBY PROLOGIC (or PRO LOGIC ON/OFF on the remote) while playing a program source. The indicator on the front panel’s DOLBY PROLOGIC button lights up. To cancel the Dolby Pr...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - MHC-RXD6AV (613.19 kb)