Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
34 Making a personal audio emphasis file .......................................................... 35 Other Features Using the Radio Data System (RDS)* 37 Singing along: Karaoke ...................... 39 Falling asleep to music ........................ 41 Waking up to music ............................. 42 Timer-recording radio programs ....... 43 Optional AV components Connecting audio components .......... 44 Connecting a VCR ................................ 46 Connecting outdoor antennas ............ 46 Additional Information Precautions ............................................ 48 Troubleshooting ................................... 49 Specifications ........................................ 52 Index ........................................ Back cover * European model only. Getting Started Step 1: Hooking up the system Do the following procedure 1 to 4 to hook up your system using the supplied cords and accessories. Surround speaker* (Right) Surround speaker* (Left) 124311AM loop antenna FM antenna Front speaker (Right) * MHC-GRX80J/GRX80/R880/RXD8S only 1 Connect the speakers. 1 Connect the speaker cords of front speakers to the SPEAKER jacks as below. For the front speakers with jacks, connect the speaker cords to the speaker in the same way. Insert only the stripped portion. Front speaker (Left) Notes • Keep the speaker cords away from the antennas to prevent noise. • The type of speakers supplied vary according to the model you purchased (see “Specifications” on page 52). 2 (MHC-GRX80J/GRX80/R880/RXD8S 4 R + L + –Red/Solid (O) Black/ Stripe (O) only) Connect the speaker cords from the surround speakers to the appropriate SURROUND SPEAKER jacks. Connect the red cords to the red jacks and connect the black cords to the black jacks. Keep the speaker cords away from the antennas to prevent noise. 3 For models with a voltage selector, set VOLTAGE SELECTOR to Insert only the stripped portion. position of your local power line voltage. R + L + – Red (O) Black (O) Notes VOLTAGE SELECTOR 220V120V 230 240V- • Do not place the surround speakers on top of a TV. This may cause distortion of the colors in the TV screen. • Be sure to connect both left and right surround speakers. Otherwise, the sound will not be heard. 2 Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. Jack type A Extend the FM lead antenna horizontally. AM loop antenna FM75 AM 4 Connect the power cord to a wall outlet. The demonstration appears in the display. When you press , the system turns on and the demonstration automatically ends. If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter). To connect optional AV components See page 44. To deactivate the demonstration When you set the time (Step 2: Setting the time), the demonstration is deactivated. To activate/deactivate the demonstration again, press DISPLAY (for MHC-RXD8/ RXD8S) or DEMO (STANDBY) (for MHC-GRX80J/GRX80/R880) while the system is off. Jack type B Extend the FM lead antenna horizontally. FM75 AM COAXIAL AM loop antenna continued Step 1: Hooking up the system (continued) To attach the front speaker pads Attach the supplied front speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. Step 2: Setting the time You must set the time before using the timer functions. The clock is on a 24-hour system for the Inserting two size AA (R6) batteries into the remote }} ] ] Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Note European and Russian models, and a 12-hour system for other models. The 24-hour system model is used for illustration purposes. 1 2,4 3,5 DISPLAY If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. 1 Press CLOCK/TIMER SET. The hour indication flashes. When carrying this system Do the following to protect the CD mechanism. 1 Press FUNCTION repeatedly until “CD” appears in the display. 2 Turn the jog dial to set the hour. 2 Hold down LOOP and press so that “LOCK” appears in the display. 3 Press ENTER/NEXT. The minute indication flashes. 4 Turn the jog dial to set the minute. 5 Press ENTER/NEXT. The clock starts working. Tip If you’ve made a mistake, start over from step 1. To change the time The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the following: 1 Press CLOCK/TIMER SET. 2 Turn the jog dial to select SET CLOCK. 3 Press ENTER/NEXT. 4 Perform steps 2 through 5 above. Note The clock settings are canceled when you disconnect the power cord or if a power failure occurs. Step 3: Presetting radio stations You can preset the following number of stations: – 2 band model: 20 for FM, 10 for AM. – 3 band model: 20 for FM, 10 for MW, and 10 for SW, or 20 for FM, 10 for AM, and 5 f...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - MHC-GRX80J (789.5 kb)
Stereoanlage - MHC-RXD8S (789.5 kb)