Stimmen - 3, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
• When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • To record non-preset stations, use + and – in step 2 to tune in the desired station manually. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears after pressing REC PAUSE/START in step 4. • If noise is heard while recording from the radio, move the respective antenna to reduce the noise. Playing a tape You can use any type of tape, TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal) , since the deck automatically detects the tape type. You can also use the jog dial’s AMS functions to quickly search for songs you want to hear. To select either deck A or B, press DECK A (or DECK B (on the remote. (Power) 3 p VOLUME0) =+ DOLBY NR1 2 1 A . p =+ 0) DECK A ( DECK B ( VOL +/– 1 TipsPress ¤and iin deck A or With the side you want to play facing nsert a recorded tape B. • Pressing TAPE A (or TAPE B) (or 9when the power is off automatically turns the power on and starts tape playback if there is a tape in the deck (One Touch Play). When the system is in the Power Saving Mode, the One Touch Play function does not work. forward • You can switch from another source to the tape deck just by pressing TAPE A (or TAPE B) (or 9(Automatic Source Selection). select Ato 2 Press DIRECplay one side. Select TION repeatedly to • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears. §* to play both sides. Searching for the beginning of a To play both decks in succession, select track (AMS*) RELAY (relay 3 Press TAPE A (or TAPE B) ( (DECK A (or play).** DECK B) (on the During playback, turn the jog dial the same direction as the 9or (indicator to go forward. Turn the opposite direction to go back. (Or press =or +on the remote.) remote). Press TAPE A ( the reverse sideor TAPE B) 9to play . (Press DECK A (or The search direction, + (forward) or – (back), and number of songs being skipped (1~9) appear in the display. DECK B) (athe reverse sidegain on the remote to play .) The tape starts playing. Example: searching forward 2 songs * The deck stops automatically after * AMS (Automatic Music Sensor) repeating the sequence five times. Notes sequence: ** Relay play always follows the following The AMS function may not operate correctly under the following circumstances: Deck A (front sidDeck B (front sidee), Deck A (reverse side), ), Deck B (reverse side). – When the unrecorded space between songs is less than 4 seconds long. To Stop play Fast-forward Rewind Remove the cassette Do this Press p. Press 0or ). Press 0or ). Press ¤. – If completely different information is recorded on the left and right channels. – When there are continuous sections of extremely low level or low frequency sound (like those of a baritone sax). – When the unit is placed near a television. (In this case, we recommend moving the unit farther away from the television or turning off the television.) Adjust the volume Turn VOLUME (or press VOL +/– on the remote). Basic Operations Recording from a tape — High-speed Dubbing You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. (Power) DOLBY NR 2 p 13 41 1 Press ¤and insert a recorded tape in deck A and a recordable tape in deck B. With the side you want to play/record facing forward 2 Press HI-DUB. Deck B stands by for recording. 3 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 4 Press REC PAUSE/START. Dubbing starts. To stop dubbing Press p. Tips • When you dub on both sides, start recording from the front side. If you record from the reverse side, recording stops at the end of the reverse side. • If you set DIRECTION to §when the tapes you use have different lengths, the tape in each deck reverses independently. If you select RELAY, the tapes in both decks reverse together. • You don’t have to set DOLBY NR, since the tape in deck B is automatically recorded in the same state as the tape in deck A. The CD Player Using the CD display You can check the remaining time of the current track or that of the CD. When a CD TEXT disc is loaded, you can check the information stored on the disc, such as the disc titles or artist names. When the unit detects CD TEXT discs, the “CD TEXT” indication appears in the display. (Power) DISPLAY /Press DISPLAY. Each time you press the button during normal playback or in the stop mode, the display changes as follows: During normal playback n Playing time on the current track µ Remaining time on the current track µ Remaining time on current CD (1 DISC mode) or “--.--” display (ALL DISCS mode) µ Title name of the current track* µ Clock display (for eight seconds) µ Effect (P FILE) name or “EFFECT ON (OFF)” In the stop mode nTitle name of the CD* µ Artist information* µ Total number of tracks and total play...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - MHC-GRX50 (723.43 kb)
Stereoanlage - MHC-GRX70 (723.43 kb)
Stereoanlage - MHC-GRX70J (723.43 kb)
Stereoanlage - MHC-GRX9900 (723.43 kb)