Stimmen - 4, Durchschnittliche Bewertung: 3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
To cancel the timer operation 1 Press DAILY. 2 “TIMER OFF” appears in the display. Notes • The system turns on 15 seconds before the preset time. • You cannot set the timer if the timer on and off times are the same. • When you set the Sleep Timer, the Daily Timer will not turn on the system until the Sleep Timer turns it off. • You cannot set the Daily Timer and Timer- recording to be activated at the same time. Timer-recording radio programs To timer-record, you must preset the radio station (see “Step 4: Presetting radio stations” on page 10) and set the clock (see “Step 3: Setting the time” on page 9) beforehand. REC 7 2 6 3,4,5 1 Tune in the preset radio station (see “Listening to the radio” on page 15). 2 Press t/CLOCK SET. “SET” appears and “DAILY” flashes in the display. 3 Press TUNING +/– to select “REC,” then press ENTER/NEXT. “ON” appears and the hour indication flashes in the display. 4 Set the time to start recording. Press TUNING +/– to set the hour, then press ENTER/NEXT. The minutes indication flashes. Press TUNING +/– to set the minutes, then press ENTER/NEXT. The hour indication flashes again. 5 Set the time to stop recording following the above procedure. The start time, the stop time, the recording source, and the preset station appear in turn before the original display returns. 6 Insert a blank tape in deck B. 7 Turn off the system. When recording starts, the volume level is set to the minimum. To check the setting 1 Press REC. 2 “TIMER OFF” appears in the display. 3 Press REC again. To change the setting, start over from step 1 on the previous page. To cancel the timer operation 1 Press REC. 2 “TIMER OFF” appears in the display. Notes • The system turns on 15 seconds before the preset time. • If the system is on at the preset time, the Timer recording will not be made. • You cannot set the timer if the timer on and off times are the same. • When you set the Sleep Timer, the Timer- recording will not start until the Sleep Timer turns off the system. • You cannot set the Daily Timer and Timer- recording to be activated at the same time. • Recording starts from the front side. Optional AV components Optional AV components Connecting audio components Connecting a turntable Be sure to match the color of the plugs and the connectors. To listen to the sound from the connected turntable, press FUNCTION repeatedly until “PHONO” appears. Refer to the instructions included with your turntable for details. To the audio output of the turntable Note Using the turntable at high volume may cause distortion or howling. This is often caused by the bass sound from the speakers. The bass sound may be picked up by the needle of the turntable, and produce the distortion or howling. To avoid this, do the following: 1 Keep some distance between the speakers and the turntable. 2 Stop using the surround effect. 3 Install the speakers or the turntable on a firm and stable surface. 4 Press SUPER WOOFER repeatedly until the indicator on this button goes off. Connecting an MD deck for digital recording You can record a CD to an MD digitally by connecting your MD deck using an optical cable. Refer to the instructions included with your MD deck for details. To the digital input of the MD deck Connecting an MD deck for analog recording Be sure to match the color of the plugs and the connectors. To listen to the sound of the connected MD deck, press FUNCTION repeatedly until “MD” appears. Refer to the instructions included with your MD deck for details. To the audio outputs To the audio inputs of of the MD deck the MD deck Connecting a subwoofer (LBT-DR8AV/W900AV only) You can connect an optional subwoofer. Refer to the instructions included with your subwoofer for details. To the input of the subwoofer Connecting video components You can connect a VCR, camcorder, or video game to the VIDEO 1 jack on the rear panel and/or the VIDEO2 INPUT jack on the front panel. You can also connect a DVD player to the DVD INPUT jacks on the rear panel (LBTDR8AV/ W900AV only). Connecting a TV To see the picture from the connected components, connect the input jack of your TV to the VIDEO OUT jack with the video connecting cable (not supplied). To the input jack of the TV When using a TV Turn on the TV and select the video input to watch the pictures from this system. continued Connecting video components (continued) You can control Sony TVs using the buttons below. TV/ TV 1/u VIDEO TV CH TV VOL By pressing You can TV 1/u Turn on or off the TV TV/VIDEO Select the input source for the TV TV VOL Adjust the volume of the TV TV CH Change the channel of the TV Note Depending on the TV, you may not be able to control your TV or to use some buttons above. Connecting a VCR Be sure to match the color of the plugs and the connectors. To listen to the sound from the connected VCR, press FUNCTION repeatedly until “VIDEO 1” appears. Refer to the instructions included with your VCR for details. To the audio output To the video output of the VCR of ...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - LBT-W700AV (861.85 kb)
Stereoanlage - LBT-W900AV (861.85 kb)
Stereoanlage - LBT-XB800AV (861.85 kb)