Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
The tape does not erase completely. • The record/playback heads are magnetized. Demagnetize them (see page 45). There is excessive wow or flutter, or the sound drops out. • The capstans or pinch rollers are dirty. Clean them (see page 45). Noise increases or the high frequencies are missing. • The record/playback heads are magnetized. Demagnetize them (see page 45). Tuner Severe hum or noise (“TUNED” or “STEREO” flashes in the display). •Adjust the antenna. •The signal strength is too weak. Connect an external antenna. A stereo FM program cannot be received in stereo. •Press STEREO/MONO so “STEREO” appears in the display. If other problems not described above occur, reset the system as follows: 1 Unplug the power cord. 2 Plug the power cord back in. 3 Press SPECTRUM ANALYZER, ENTER, and DISC 1 at the same time. REAR SPEAKER: 12.5 + 12.5 watts (16 ohms at 1 kHz, 10% Specifications THD) Peak music power output (Reference) 2,000 watts Amplifier section Inputs (LBT-D890AV) Continuous RMS power output FRONT SPEAKER: 120 + 120 watts (8 ohms at 1 kHz, 10% THD) CENTER SPEAKER: 40 watts (8 ohms at 1 kHz, 10% THD) REAR SPEAKER: 20 + 20 watts (16 ohms at 1 kHz, 10% THD) Total harmonic distortion Less than 0.07% (8 ohms at 1 kHz, 50 watts FRONT SPEAKER) (LBT-XB80AV) DIN power output (Rated) FRONT SPEAKER: 100 + 100 watts (8 ohms at 1 kHz, DIN) CENTER SPEAKER: 35 watts (8 ohms at 1 kHz, DIN) REAR SPEAKER: 17.5 + 17.5 watts (16 ohms at 1 kHz, DIN) Continuous RMS power output (Reference) FRONT SPEAKER: 120 + 120 watts (8 ohms at 1 kHz, 10% THD) CENTER SPEAKER: 42 watts (8 ohms at 1 kHz, 10% THD) REAR SPEAKER: 21 + 21 watts (16 ohms at 1 kHz, 10% THD) Music power output (Reference) FRONT SPEAKER: 210 + 210 watts (8 ohms at 1 kHz, 10% THD) CENTER SPEAKER: 70 watts (8 ohms at 1 kHz, 10% THD) REAR SPEAKER: 35 + 35 watts (16 ohms at 1 kHz, 10% THD) (LBT-XB55AV/XB88AV/XB88AVK) The following measured at AC 120/240 V, 50 Hz DIN power output (Rated) FRONT SPEAKER: 105 + 105 watts (6 ohms at 1 kHz, DIN) CENTER SPEAKER: 20 watts (8 ohms at 1 kHz, DIN) REAR SPEAKER: 10 + 10 watts (16 ohms at 1 kHz, DIN) Continuous RMS power output (Reference) FRONT SPEAKER: 130 + 130 watts (6 ohms at 1 kHz, 10% THD) CENTER SPEAKER: 25 watts (8 ohms at 1 kHz, 10% THD) PHONO IN (phono jacks):sensitivity 3 mV, impedance 47 kilohms (LBT-D890AV) VIDEO (AUDIO) IN (phono jacks): sensitivity 250 mV, impedance 47 kilohms (LBT-XB55AV/XB80AV/XB88AV/XB88AVK) VIDEO/MD (AUDIO) IN (phono jacks): sensitivity 250 mV, impedance 47 kilohms MIX MIC (phone jack): sensitivity 1 mV, impedance 10 kilohms Outputs PHONES (stereo phone jack): accepts headphones of 8 ohms or more (LBT-XB55AV/XB80AV/XB88AV/XB88AVK) VIDEO/MD (AUDIO) OUT (phono jacks): voltage 250 mV, impedance 1 kilohm FRONT SPEAKER: (LBT-D890AV/XB80AV) accepts impedance of 8 to 16 ohms (LBT-XB55AV/XB88AV/XB88AVK) accepts impedance of 6 to 16 ohms SURROUND SPEAKER CENTER: accepts impedance of 8 to 16 ohms SURROUND SPEAKER REAR accepts impedance of 16 ohms CD player section System Compact disc and digital audio system Laser Semiconductor laser (l = 780 nm) Emission duration: continuous Laser output Max. 44.6 m W* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Wavelength 780 – 790 nm Frequency response 2 Hz – 20 kHz (±0.5 dB) Signal-to-noise ratio More than 90 dB Dynamic range More than 90 dB (LBT-XB55AV/XB80AV/XB88AV/XB88AVK) CD DIGITAL OUT (square optical connector jack, rear panel) Wave length: 600 nm Output level: –18 dBm Tape player section Recording system 4-track 2-channel stereo Frequency response (DOLBY NR OFF) Wow and flutter Tuner section 60 – 13,000 Hz (±3 dB), using a Sony TYPE I cassette 60 – 14,000 Hz (±3 dB), using a Sony TYPE II cassette ±0.15% W. Peak (IEC) 0.1% W. RMS (NAB) ±0.2% W. Peak (DIN) Speakers SS-D8900V/XB55V for LBT-D890AV/XB55AV Speaker system 3-way, 3-unit, bass-reflex, Magnetically shielded type Speaker units Woofer: 17 cm dia., cone type Tweeter: 6 cm dia., cone type Super Tweeter: 2 cm dia., dome type Rated impedance (SS-D8900V) 8 ohms (SS-XB55V) 6 ohms Dimensions (w/h/d) Approx. 245 . 480 . 320 mm (9 3/4 . 19 . 12 5/8 in) Mass Approx. 6.7 kg (14 lb 12 oz.) net per speaker SS-XB88V for LBT-XB88AV/XB88AVK, SS-XB80V for LBT-XB80AV Speaker system 4-way, 4-unit, bass-reflex, Magnetically shielded type Speaker units Super Woofer: 17 cm dia., cone type Woofer: 20 cm dia., cone type Tweeter: 6 cm dia., cone type Super Tweeter: 2 cm dia., dome type Rated impedance (SS-XB88V) 6 ohms (SS-XB80V) 8 ohms Dimensions (w/h/d) Approx. 285 . 590 . 425 mm (11 1/4 . 23 1/4 . 16 3/4 in) Mass Approx. 15.0 kg (33 lb 1 oz.) net per speaker SS-CN88 Speaker system Full range, bass-reflex, Magnetically shielded type Speaker unit 10 cm dia., cone type Rated impedance 8 ohms Dimensions (w/h/d) Approx. 355 . 130 . 185 mm (14 . 5 1/8 . 7 3/8 in) Mass Approx. 1.8 kg (3 lb 15 oz.) net per speaker SS-SR88 Speaker system Fu...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - LBT-D890AV (851.97 kb)
Stereoanlage - LBT-XB55AV (851.97 kb)
Stereoanlage - LBT-XB88AV (851.97 kb)
Stereoanlage - LBT-XB88AVK (851.97 kb)