Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Note that you cannot use Tape Select Edit for discs containing over 20 tracks. DISC SKIP 1 23 1 Place a CD on the disc tray. If the indicator for the tray you want to record is not lit green, press DISC SKIP repeatedly so that it lights green. 2 Press FUNCTION repeatedly until “CD” appears in the display. Note You cannot use this function after programming. In order to use this function, you must first erase the program (see “Clear the entire program” in the table on page 23). 3 Press EDIT/DIRECTION once so that “EDIT” flashes. The required tape length for the currently selected CD appears, followed by the total playing time for sides A and B respectively. Sound Adjustment Sound Adjustment Adjusting the sound Selecting the audio emphasis You can reinforce the bass and listen with headphones. The audio emphasis menu lets you select the PHONES DBFB To reinforce bass (DBFB) Press DBFB*. Every time you press the button, the DBFB level display changes as follows: nDBFB NORMAL (DBFB µ DBFB HIGH (DBFB µ DBFB OFF (off) ) ) * DBFB = Dynamic Bass Feedback To listen through the headphones Connect the headphones to PHONES jack. No sound will come from the speakers. sound characteristic according to the sound you are listening to. FILE SELECT /Press FILE SELECT repeatedly until the effect (ROCK, POP, JAZZ or DANCE) you desire appears in the display. To cancel the effect Press FILE SELECT repeatedly until “FLAT” appears in the display. Tip “SUR ” appears if you select an effect with a surround effect. Activating the surround effect You can enjoy the surround effect. SURROUND /Press SURROUND so that “SUR ” appears in the display. nSURROUND ON (SUR ) µ SURROUND OFF (off) Note When you choose other sound effects, the surround effects will be canceled. 28 Other Features Falling asleep to music — Sleep Timer You can let the system turn off at the preset time, so you can sleep to the music. You can preset the time to be turned off by 10 minutes. =+ (Pp SLEEP /Press SLEEP. Every time you press the button, the minute display (the turn-off time) changes as follows: AUTO n90min n80min n70min n… n10min nOFF nAUTO … When you choose AUTO The power turns off when the current CD or tape finishes playback (for up to 100 minutes). To check the remaining time Press SLEEP once. To change the time to turn off Select the time you want by pressing SLEEP. To cancel the Sleep Timer function Press SLEEP repeatedly until “OFF” appears. Waking up to music — Wake-up Timer You can wake up to music at a preset time every day. Make sure you have set the clock (see “Step 2: Setting the time”). The 24-hour system model is used for illustration purpose. 9 4,5,6,8 TIMER 3 5,6,7 2 SELECT 1 Prepare the music source you want to play. • CD: Place a CD. To start from a specific track, make a program (see “Programming the CD tracks”). • Tape: Insert a tape with the side you want to play facing forward. • Radio: Tune in the preset station you want (see “Step 3: Presetting radio stations”). 2 Turn VOLUME to adjust the volume. continued Waking up to music (continued) 3 Press CLOCK/TIMER SET. “SET DAILY” appears. 4 Press ENTER/NEXT. “ON” appears and the hour digits flash in the display. ALL DISCS DAILY VOLUME 5 Set the time to start playback. Turn the jog dial to set the hour, then press ENTER/NEXT. The minute indication starts flashing. ALL DISCS DAILY VOLUME Turn the jog dial to set the minute, then press ENTER/NEXT. “OFF” appears and the hour indication flashes again. 6 Set the time to stop playback following the above procedure. 7 Turn the jog dial until the music source you want appears. The indications change as follows: 8 Press ENTER/NEXT. The type of timer (“DAILY”) appears, followed by the start time, the stop time and the music source, then the original display appears. 9 Turn off the power. To check the setting Press TIMER SELECT repeatedly until “DAILY” appears. To change the setting, start over from step 1. To cancel the timer operation Press TIMER SELECT repeatedly until “TIMER OFF” appears. Tips • The power turns on 15 seconds before the preset time. • You cannot set the timer if the timer on and off times are the same. • When you set the Sleep Timer, the Wake-up Timer will not turn on the system until the Sleep Timer turns it off. • You cannot activate the Wake-up Timer and Timer-recording at the same time. nTUNER .CD PLAY .TAPE PLAY N Timer-recording radio programs To timer-record, you must preset the radio station (see “Step 3: Presetting radio stations”) and set the clock (see “Step 2: Setting the time”) beforehand. 8 3,5,6 2 TIMER SELECT 4,5,6 7 1 Tune in the preset radio station (see “Listening to the radio”). 2 Press CLOCK/TIMER SET. “SET DAILY” appears. 3 Turn the jog dial until “SET REC” appears. 4 Press ENTER/NEXT. “ON” appears and the hour digits flash in the display. ALL DISCS REC VOLUME 5 Set the time to start recording. Turn the jog dial to set the hour, then press ENTER/NEXT. The minute indication starts flashing. ALL DISCS REC VOLUME ...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - MHC-GRX3 (425.88 kb)
Stereoanlage - MHC-R500 (425.88 kb)
Stereoanlage - MHC-RX55 (425.88 kb)