Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Sony Dateigröße: 853.16 kb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Stereoanlage - LBT-XB88AV (856.89 kb)

Stereoanlage - LBT-XB88AV (851.97 kb)

The equalizer settings will not be recorded. Note You cannot listen to other sources while recording. VOLUME +/– 1 Press TUNER/BAND repeatedly until the band you want appears in the display. Each time you press this button, the band changes as follows: 2 band model: FM .AM 3 band model: FM nMW nLW n Tips • Pressing TUNER/BAND while the system is off automatically turns on the system and tunes to the last received station (One Touch Play). • You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection). • If an FM program is noisy, press STEREO/ MONO so “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press this button again to restore the stereo effect. • To improve broadcast reception, move the 4 band model: supplied antennas. FM nMW nLW nUKV* n * When you select this band, “STEREO Plus” appears in the display. 2 Press TUNING MODE repeatedly until “PRESET” appears in the display. MANUAL nAUTO nPRESET n 3 Press TUNING +/– to tune in the desired preset station. Preset number Frequency DISCALL DOLBY NR OFF PRESET TUNED STEREO MHzS Basic Operations To Do this Turn off the radio Press 1/u(power). Adjust the volume Turn VOLUME (or press VOLUME +/– on the remote). To listen to non-preset radio stations Press TUNING MODE repeatedly in step 2 until “MANUAL” appears, then press TUNING +/– to tune in the desired station. Recording from the radio You can record a radio program on a tape by tuning in a preset station. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. DSP (Power) 1/u 3 21 6 745 DOLBY NR »p 1 Press TUNER/BAND repeatedly until the band you want appears in the display. 2 Press TUNING MODE repeatedly until “PRESET” appears in the display. 3 Press TUNING +/– to tune in a preset station. Preset number DISCALL DOLBY NR OFF PRESET TUNED STEREO MHzS Frequency 4 Press 6EJECT and insert a blank tape into deck B. With the side you want to record on facing forward »» 6Pr0) 6 »» p0)p 5 Press rREC. Deck B stands by for recording, and the indicator on the abutton (for the front side) lights up green. 6 Press DIRECTION repeatedly to select Ato record on one side or §(or RELAY) to record on both sides. 7 Press Pon deck B. Recording starts. To stop recording Press pon deck B. Tips • If you want to record on the reverse side, press . so the indicator on the »button (for the reverse side) lights up green after pressing rREC in step 5. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • To record non-preset stations, select “MANUAL” in step 2, then press TUNING +/– to tune in the desired station. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR before step 7 so “DOLBY NR B” appears in the display. • To record with surround effect, press DSP (or DSP MODE on the remote) so “SUR ” appears in the display. The equalizer settings will not be recorded. • If noise is heard while recording from the radio, move the appropriate antenna to reduce the noise. Playing a tape You can play any type of tape, TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal). The deck automatically detects the tape type. To select either deck A or B, press DECK A »aor DECK B »aon the remote. 1/u 0/ 0/ (Power) 3 ) VOLUME 3 ) Basic Operations p DOLBY NR pP 21 1 DECK A »· DECK B »· p P 0/) VOLUME +/– continued Playing a tape (continued) 1 Press 6EJECT and insert a recorded tape in deck A or B. With the side you want to play facing forward »» 6Pr0) 6 »» p0)p 2 Press DIRECTION repeatedly to select Ato play one side, §* to play both sides, or RELAY (Relay Play)** to play both decks in succession. 3 Press a. Press »to play the reverse side. The tape starts playing. * The deck stops automatically after playing both sides five times. ** Relay Play always plays according to the following sequence: Deck A (front side), Deck A (reverse side), Deck B (front side), Deck B (reverse side). To Do this Stop play Press p. Pause (Deck B only) Press P. Press again to resume play. Fast-forward Press )while playing the front side or 0while playing the reverse side. Rewind Press 0while playing the front side or )while playing the reverse side. Remove the cassette Press 6EJECT. Adjust the volume Turn VOLUME (or press VOLUME +/– on the remote). Tips • Pressing aor » while the system is off automatically turns on the system and starts tape playback if there is a tape in the deck (One Touch Play). • You can switch from another source to the tape deck just by pressing aor »(Automatic Source Selection). • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so “DOLBY NR B” appears in the display. Recording from a tape — High-speed Dubbing You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. 1/u (Power) p 31 412 1 Press 6...

Herunterladen

Geben Sie zwei Ziffern: