Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
a.¤.0) POWER SLEEP /Press SLEEP. Every time you press the button, the minute display (the turn-off time) changes as follows: AUTO n90min n80min n70min n… n10min nOFF nAUTO … When you choose auto The power turns off when the current CD or tape finishes playback (for up to 100 minutes). To check the remaining time Press SLEEP once. To change the time to turn off Select the time you want by pressing SLEEP. To cancel the Sleep Timer function Press SLEEP repeatedly until “OFF” appears. Waking up to music — Wake-up Timer You can wake up to music at a preset time every day. Make sure you have set the clock (see “Step 2: Setting the time”). 9 3 4,5,6,7,8 a.¤.0) 2TIMER SELECT 1 Prepare the music source you want to play. • CD: Insert a CD. To start from a specific track, make a program (see “Programming the CD tracks”). • Tape: Insert an tape with the side you want to play facing forward. • Radio: Tune in the preset station you want (see “Step 3: Presetting radio stations”). 2 Adjust the volume. 3 Press CLOCK/TIMER SET. “SET (DAILY 1)” appears. 4 Turn jog dial to select DAILY 1 or 2, then press ENTER/NEXT. “ON” appears and the hour digits flash in the display. VOLUME 1 5 Set the time to start playback. Turn jog dial to set the hour, then press ENTER/NEXT. The minute indication starts flashing. VOLUME 1 Turn jog dial to set the minute, then press ENTER/NEXT. The hour indication flashes again. 6 Set the time to stop playback following the above procedure. 7 Turn jog dial until the music source you want appears. The indications change as follows: TUNER nCD PLAY nTAPE PLAY 8 Press ENTER/NEXT. The start time, followed by the stop time and the music source, appears, then the original display appears. 9 Turn off the power continuedE Waking up to music (continued) To check the setting Press TIMER SELECT and turn the jog dial to select the respective mode (DAILY 1 or DAILY 2), then press ENTER/NEXT. To change the setting, start over from step 1. To cancel the timer operation Press TIMER SELECT and turn the jog dial to select “OFF”, then press ENTER/NEXT. Tip The power turns on 15 seconds before the preset time. Note When setting the wake-up timer, set the equalizer display to anything other than Spectrum analyzer pattern 3.(See “To change the equalizer display” on page 30.) Timer-recording radio programs To timer-record, you must preset the radio station (see “Step 3: Presetting radio stations”) and set the clock (see “Step 2: Setting the time”) beforehand. 7 2 3,4,5 6 1 Tune in the preset radio station (see “Listening to the radio”). 2 Press CLOCK/TIMER SET. “SET (DAILY 1)” appears. a.a..»a¤¤.0) a..»a TIMER SELECT 3 Turn jog dial to select REC, then press ENTER/NEXT. “ON” appears and the hour digits flash in the display. VOLUME REC 4 Set the time to start recording. Turn jog dial to set the hour, then press ENTER/NEXT. The minute indication starts flashing. VOLUME REC Turn jog dial to set the minute, then press ENTER/NEXT. The hour indication flashes again. 5 Set the time to stop recording following the above procedure. The start time appears, followed by the stop time, the recording source and the radio station, then the original display appears. 6 Insert a recordable tape. 7 Turn off the power. When the recording starts, the volume level is set to the minimum. To check the setting Press TIMER SELECT and turn the jog dial to select “REC”, then press ENTER/NEXT. To change the setting, start over from step 1. To cancel the timer operation Press TIMER SELECT and turn the jog dial to select “OFF”, then press ENTER/NEXT. Notes • When setting the timer-recording, set the equalizer display to anything other than Spectrum analyzer pattern 3. (See “To change the equalizer display” on page 30.) • If the power is on at the preset time, the recording will not be made. Additional Information Additional Information Precautions On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply. On safety • The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. • Unplug the system from the wall outlet (mains) if it is not to be used for an extended period of time. To disconnect the cord (mains lead), pull it out by the plug. Never pull the cord itself. • Should any solid object or liquid fall into the component, unplug the stereo system and have the component checked by qualified personnel before operating it any further. • The AC power cord must be changed only at the qualified service shop. On placement • Place the stereo system in a location with adequate ventilation to prevent heat build-up in the stereo system. • Do not place the unit in an inclined position. • Do not place the unit in locations where it is; — Extremely hot or cold — Dusty or dirty — Very humid — Vibrating — Subject to direct sunlight On operation • If the stereo system is brought dir...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - MHC-D60 (937.9 kb)
Stereoanlage - MHC-GR7 (937.9 kb)
Stereoanlage - MHC-GR7J (937.9 kb)