Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
The system is set at the factory not to display the clock when the system is off (Power Saving Mode). To display the clock even when the system is off, deactivate the Power Saving Mode. x . > H `/1 X Mm ?/1 (Power) DISPLAY To activate Power Saving Mode Press DISPLAY. The clock display disappears. Tips • Each time you press DISPLAY in the Power Saving Mode, the display switches between the Power Saving Mode and the clock display. • ?/1 indicator lights up even in the Power Saving Mode. Note When the timer is set, the Power Saving Mode does not function. Getting Started , Press DISPLAY when the system is off. The system switches off the Power Saving Mode and the clock display appears. Basic Operations Basic Operations Playing a CD To turn on the system, press ?/1 (power). ?/1 (power) 2 lm/ML HS A A MmlL h H HS `/1 1 VOLUMEs 1 Press CD A and place a CD on the disc tray. With the label side up. When you play a CD single (8 cm CD), place it on the inner circle of the tray. HS HS h HS To close the disc tray, press CD A again. 2 Press CD HS. The disc tray closes and play starts. The indicator on the CD HS button lights green. Track number Playing time To Do this Stop play Press s. Pause Press CD HS. The indicator on the CD HS button lights orange. Press again to resume play. Select a track Press lm or ML repeatedly. Find a point in a Keep pressing lm or track ML during play and release it at the desired point. “—OVER—” appears at the end of the CD. Remove the CD Press CD A. Adjust the Turn VOLUME. volume Tips • If there is no CD in the player, “CD No Disc” appears in the display. • Pressing CD HS when the system is off automatically turns on the system and starts CD play if there is a CD on the disc tray (One Touch Play). • You can switch from another source to the CD player and start playing a CD just by pressing CD HS (Automatic Source Selection). • You can start playing from the desired track in step 2. 1 Press lm or ML repeatedly until the desired track appears. 2 Press CD HS. Or, press the number buttons on the remote. The playback automatically starts. To enter track numbers 10 or over, press >10 and the track number. To enter 0, use the 10/0 button. Notes • Do not use a CD with tape, seals or paste on it as this may damage the CD player. • Do not push the disc tray to close it, as this may damage the CD player. Press CD A to close the disc tray. Recording a CD on an MD or a tape You can make a digital recording of a CD on an MD or an analogue recording on a tape. You can also record a programme of favourite tracks (see pages 32 and 53). To turn on the system, press ?/1 (power). Recording on an MD If you use a partially recorded MD, recording starts after the recorded tracks. To erase the recorded contents, see “Erasing recordings” on page 45. ?/1 (power) s MD A HS HS A MmlL h H `/1 4 5,6 2,3 continued Basic Operations Recording a CD on an MD or a tape (continued) ENTER/YES NAME EDIT/ CHARACTER `/1 1 Insert a recordable MD. With the arrow pointing toward the deck With the label side up, and the shutter on the righthand side HS HS h H S 2 Press CD A and place a CD on the disc tray. With the label side up. When you play a CD single (8 cm CD), place it on the inner circle of the tray. HS HS h HS 3 Press CD A to close the disc tray. 4 Press SYNCHRO REC repeatedly until “CD-MD SYNC ?” appears. 5 Press ENTER/START. The MD deck stands by for recording and the CD player pauses for play. 6 Press ENTER/START again. Recording starts. When the recording is completed, the CD player and the MD deck stop automatically. To stop recording Press s. Tips • If you use a partially recorded MD, recording starts after the recorded tracks. • The track numbers of the CD are recorded on to the MD automatically. • Depending on the disc, CD TEXT information may also be recorded (except when you record on an MD and a tape at the same time). If “CD-TEXT” flashes during recording, press NAME EDIT/ CHARACTER on the remote, and then press ENTER/YES on the remote to record the title of the current track. (If “CD-TEXT” is lit, it is automatically recorded.) Note If “Cannot SYNC!” appears, a disc is not loaded or you cannot record on that MD (see page 72). If the MD becomes full during recording The CD player and the MD deck stop automatically. Before pulling out the mains lead MD recording is completed when the MD Table of Contents (TOC) is updated. The TOC is updated when you eject the MD or press ?/1 to turn off the system. Do not pull out the mains lead before updating the TOC (while “TOC” is lit) or while updating the TOC (while “TOC” or “STANDBY” is flashing) to ensure a complete recording. Recording on a tape You can use TYPE I (normal) or TYPE II (CrO2) tape. 4 ?/1 (power) 5,7 2,3 HS HS A MmlL H `/1 h s TAPE h DOLBY NR* 6 * This tape deck equipped with the Dolby B-type noise reduction system. 1 Press to open the cover and insert a blank tape. With the side you want to record on facing up MmlL 2 Press CD A and place a CD on the disc tra...