Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Sony Dateigröße: 1.55 mb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Sony  MHC-GT444

Dieses Gerät hat auch andere Anweisungen:

Stereoanlage - MHC-GT444 (1.54 mb)

Stereoanlage - MHC-GT444 (1.58 mb)

Stereoanlage - MHC-GT444 (1.57 mb)

RM-AMU008: Press TIMER MENU to select “TIMER SELECT”, then press . Press v/V repeatedly until “PLAY SELECT” or “REC SELECT” appears, and then press . Unit: Press REC TIMER, turn OPERATION DIAL until “REC SELECT” appears, and then press ENTER. To cancel the timer Repeat the same procedure as above until “TIMER OFF” appears, and then press ENTER (RM-AMU006 or on the unit) or (RM-AMU008). To change the setting Start over from step 1. Tips • The system turns on before the preset time. If the system is turned on at the preset time or if “STANDBY” flashes in the display, the Play Timer and the Recording Timer will not play or record. • The Play Timer setting remains as long as the setting is not canceled manually. • The volume is reduced to minimum during the Recording Timer. • The Recording Timer is canceled automatically after the Recording Timer has been activated. 32GB Others Others 1 Make sure the power cord and speaker cords are correctly and firmly connected. 2 Find your problem in the checklist below, and take the indicated corrective action. If the problem persists, contact your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. If the STANDBY indicator flashes Immediately unplug the power cord, and check the following items. • If your system has a voltage selector, is the voltage selector set to the correct voltage? • Are you using only the supplied speakers? • Is anything blocking the ventilation holes on the back of the unit? After checking the above items and fixing any problems, plug in the power cord again and turn on the system. If the STANDBY indicator still flashes, or if the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer. General The display starts flashing as soon as you plug in the power cord even though you have not turned on the system. • Press DISPLAY once while the system is turned off. The demonstration disappears. Sound comes from one channel, or the left and right volumes are unbalanced. • Place the speakers as symmetrically as possible. • Connect only the supplied speakers. Severe hum or noise. • Move the system away from sources of noise. • Connect the system to a different wall socket. • Install a noise filter (available separately) to the power cord. • Turn off the surrounding electrical equipment. The remote does not function. • Remove any obstacles between the remote and the remote sensor on the unit, and position the unit away from fluorescent lights. • Point the remote at the system’s sensor. • Move the remote closer to the system. CD/MP3 player The sound skips, or the disc will not play. • Wipe the disc clean. • Move the system to a location away from vibration (for example, on top of a stable stand). • Move the speakers away from the unit, or place them on separate stands. At high volume, speaker vibration may cause the sound to skip. Play does not start from the first track. • Press PLAY MODE repeatedly until both “PGM” and “SHUF” light off in the display to return to normal play. Continued l Others 33GB Starting playback takes more time than usual. Starting playback takes more time than usual. The following MP3 discs take a longer time to start playback. – a disc recorded with a complicated tree structure. – a disc recorded in multisession mode. – a disc that has not been finalized (a disc to which data can be added). – a disc that has many folders. USB device You cannot start transferring to an USB device. • The following problems may have occurred. – The USB device is full. – The number of audio files and folders on the USB device has reached the upper limit. – The USB device is write-protected. Transferring is stopped before it is finished. • You are using an unsupported USB device. See “Compatible USB devices with this system” (page 44) for the supported device types. • The USB device is not formatted correctly. Refer to the USB device operation manual on how to format. • Turn off the system and remove the USB device. If the USB device has a power switch, turn the USB device off and then on again after removing it from the system. Then perform transferring again. • If the transferring and erase operations are repeated multiple times, the file structure within the USB device becomes complex. Refer to the USB device operation manual on how to deal with this problem. Transferring to an USB device results in an error. • You are using an unsupported USB device. See “Compatible USB devices with this system” (page 44) for the supported device types. • The USB device was disconnected or the power was turned off during transferring. Delete the partially- transferred file, and transfer again. If this does not fix the problem, the USB device may be broken. Refer to the USB device operation manual on how to deal with this problem. • Turn off the system and remove the USB device. If the USB device has a power switch, turn the USB device off and then on agai...

Herunterladen

Geben Sie zwei Ziffern: