Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Notes on playing multisession discs .If the disc begins with a CD-DA (or MP3) session, it is recognized as a CD-DA (or MP3) disc, and other sessions are not played back. .A disc with a mixed CD format is recognized as a CD-DA (audio) disc. Listening to the radio 1 Select “FM” or “AM.” Press TUNER/BAND . repeatedly. 2 Select the tuning mode. Press TUNING MODE . repeatedly until “AUTO” appears. 3 Tune in the desired station. Press +/. (or TUNE +/. on the unit) .. Scanning stops automatically when a station is tuned in, and then “TUNED” and “ST” (for stereo programs only) appear. When you tune in a station that provides RDS services, the station name appears on the display (European model only). 4 Adjust the volume. Press VOLUME +/. (or turn the VOLUME control on the unit) .. To stop automatic scanning Press ... To tune in a station with a weak signal If “TUNED” does not appear and the scanning does not stop, press TUNING MODE . repeatedly until “AUTO” and “PRESET” disappear, and then press +/. (or TUNE +/. on the unit) . repeatedly to tune in the desired station. To reduce static noise on a weak FM stereo station Press FM MODE . repeatedly until “MONO” appears to turn off stereo reception. 1 GB Listening to music of an USB device You can connect an optional USB device (Digital music player or USB storage media) to the (USB) port . on the unit and listen to music stored in the USB device. See “Playable USB devices” (page 29) for a list of USB devices that can be connected to this system. The audio formats that can be played back by this system are as follows: ATRAC/MP3*/WMA*/AAC* * Files with copyright protection (Digital Rights Management) cannot be played by this system. Files downloaded from an online music store may not be played by this system. 1 Select the USB function. Press USB .. 2 Connect an optional USB device (Digital music player or USB storage media) to the (USB) Basic Operations port . as shown below. USB device (Digital music player or USB storage media) When USB cable connection is necessary, connect the USB cable supplied with the USB device to be connected. See the operation manual supplied with the USB device to be connected for details on the operation method. When the USB device is connected, the display changes as follows: “Reading” .“ATRAC AD1)” or “STORAGE DRIVE2)” 1) When connecting a digital music player. 2) When connecting USB storage media. The volume label is displayed next if recorded. Note It may take about 10 seconds before “Reading” appears depending on the type of USB device connected. 3 Start playback. Press . (or USB .. on the unit) .. 4 Adjust the volume. Press VOLUME +/. (or turn the VOLUME control on the unit) .. Continued . 15GB Other operation Notes on the USB device .Do not connect the system and the USB To Press Pause playback . (or USB .. on the unit) .. To resume play, press the button again. Stop playback ... Select a folder +/... Select a file ./... Select a folder SEARCH .. Press and file while ./.. to select viewing the the desired folder, then folder and file press ENTER .. Press names on the ./.. to select system display* the desired file, then press ENTER .. Find a point in Hold down ./. a file . during playback, and release the button at the desired point. Select Repeat REPEAT . repeatedly Play until “REP” or “REP1” appears. Remove the Hold down .. until USB device “No Device” appears, then remove the USB device. * You can search by different information such as album or genre for digital music players. To change the play mode Press PLAY MODE . repeatedly while the USB device is stopped. You can select normal play (“ ” for all files in the folder on the digital music player), shuffle play (“SHUF” or “ SHUF”), or program play (“PGM”). device through a USB hub. .With some connected USB devices, after an operation is performed, there may be a delay before it is performed by this system. .This system does not necessarily support all the functions provided in a connected USB device. .The playback order for the system may differ from the playback order of the connected USB device. .Always hold down .. and make sure that “No Device” appears before removing the USB device. Removing the USB device while “No Device” is not displayed may corrupt the data on it or damage the USB device itself. .Do not save other types of files or unnecessary folders on an USB device that has audio files. .Folders that have no audio files are skipped. .Files are played back in the order that they are transferred to the USB device. .The maximum numbers of folders and files that can be contained on a single USB device are as follows: . Digital music player: 65,535 groups (maximum 999 tracks per group) . USB storage media: 999 files The maximum number of files and folders may vary depending on the file and folder structure. .The audio formats that you can listen to with this system are as follows: . MP3: file extension “.mp3” . Windows Media Audio file: file extension “.wma” . AAC: file ex...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - CMT-HX30 (569.28 kb)