Stimmen - 0, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
R 0.0 dB: Set this between -6.0 dB and +6.0 dB in 1.0 dB increments. TEST TONE8) OFF:The test tone is not emitted from the speakers. ON: The test tone is emitted from each speaker in sequence.9) The test tone is emitted from the selected speakers when you select “LEVEL (FRONT)” or “LEVEL (SURROUND)”. 1 Press V/v/B repeatedly to select the desired speaker or the level. 2 Press ENTER. 3 Repeat steps 1 and 2 to adjust the speaker level for other speakers. Press V/v/B repeatedly to set “TEST TONE” to “OFF” when you have finished adjusting the speaker level. Disc Continued l 51GB For MHC-GNZ777D CONNECTION FRONT: YES SUBWOOFER2): YES: Select this if an optional subwoofer is connected. NONE: Select this if an optional subwoofer is not connected. LEVEL (FRONT)6) L 0.0 dB: Set this between -6.0 dB and 0.0 dB in 1.0 dB increments. R 0.0 dB: Set this between -6.0 dB and 0.0 dB in 1.0 dB increments. SUBWOOFER 0.0 dB: Set this between -10.0 dB and +10.0 dB in 1.0 dB increments. 1) To return to the default setting when changing a setting, press CLEAR before you press ENTER. However, you cannot return the setting of “CONNECTION” to default setting. Note that you cannot perform SPEAKER SETUP when you connect headphones or microphones to the unit. 2) Depending on the settings of other speakers, the subwoofer may output excessive sound. 3) The items that are set to “NONE” in “CONNECTION” cannot be selected. Depending on the input stream, the “DISTANCE” setting may not be effective. When you perform QUICK SETUP (page 23), the default settings are changed. 4) If each left and right speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker. 5) The setting range changes depending on the front speaker setting. 6) The items that are set to “NONE” in “CONNECTION” cannot be selected. 7) This setting cannot be selected when “SURROUND” is set to “NONE” in the “CONNECTION” setting. 8) When you adjust the speaker settings, the sound may cut off for a moment. 9) The test tone is not emitted from the subwoofer. 52GB Tuner Tuner Listening to the radio You can listen to a radio station either by selecting a preset station, or by manually tuning in the station. Listening to a preset radio station 1 Press FUNCTION +/– repeatedly to select “TUNER FM” or “TUNER AM” (or press TUNER/ BAND on the unit repeatedly to select “FM” or “AM”). 2 Press and hold TUNING +/– until the frequency indication changes and then release. “AUTO” lights up in the display. Scanning stops automatically when a station is tuned in and “TUNED” lights up in the display. When a FM stereo program is tuned in, “STEREO” lights up in the display. If the scanning does not stop, press TUNING +/– repeatedly to tune in the station you want. 3 Press TUNER MENU. “MEMORY” flashes in the display. 4 Press ENTER. A preset number flashes in the display. The stations are stored from preset number 1. Preset number BA 5 Press V or v repeatedly to select the preset number you want. 6 Press ENTER. “COMPLETE” appears in the display. The station is stored. 7 Repeat steps 1 to 6 to store other stations. You can preset up to 20 FM stations and 10 AM stations. The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. 8 To listen to a preset station, press PRESET +/– repeatedly (or turn . OPERATION DIAL > on the unit clockwise or counterclockwise) to select the preset station you want. You can also press the numeric buttons, then press ENTER to select a preset station. To stop automatic scanning Press x. To cancel presetting Press TUNER MENU. Tuner 53GB Listening to a non-preset radio station You can use manual tuning to tune in a station with a weak signal and direct tuning if you know the frequency of the station. 1 Press FUNCTION +/– repeatedly to select “TUNER FM” or “TUNER AM” (or press TUNER/ BAND on the unit repeatedly to select “FM” or “AM”). 2 Tune in the station you want. For manual tuning: Press TUNING +/– repeatedly. For direct tuning: Press D.TUNING, then use the numeric buttons to enter the frequency of the station you want. For example, press 1, 0, 2, 5 and 0 to enter the frequency of FM 102.50 MHz. Press ENTER. If you cannot tune in the station, make sure you have entered the right frequency. If you still cannot tune in the station, the frequency is not used in your area. To cancel direct tuning Press D.TUNING. To change the AM tuning interval (Except for Saudi Arabian and Russian models) The factory setting for AM tuning interval is 9 kHz (or 10 kHz for some areas). Use the buttons on the unit for the operation. 1 Press TUNER/BAND repeatedly to select “AM”. 2 Press "/1 STANDBY to turn off the system. 3 When demonstration appears, hold down ILLUMINATION and then press "/1 STANDBY to turn on the system. “AM 9K STEP” or “AM 10K STEP” appears in the display. When you change the interval, all the AM preset stations are erased. Tips • To improve broadcast reception, ad...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - MHC-GNZ777D (2.51 mb)