Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example: For 32" TVs 2~2.4m (6~8feet) For 55" TVs 3.5~4m (11~13feet) 9 Connecting the Speakers Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Please be sure to turn off the power and unplug the power cord before moving or installing this unit. Please choose one of three video connection methods. If you television is equipped with an SCART input, connect an Scart Jack (not supplied) from the AV OUT jack on the back panel of the system to the SCART IN jack on your television. L R Directions in Installing Speaker Right Speaker (Built-in subwoofer) Left Speaker (Built-in subwoofer) Connecting to a TV Method 1 Composite Video (supplied)......... Good Quality Method 2 Scart (not supplied) ............... Better Quality Connect Video Out on the player to Video In on your TV. 1 CONNECTIONS Press the TV/VIDEO button on the remote of TV control to set the TV to "VIDEO". 2 For using the SCART cable • If Scart is equipped for your TV, set RGB-COMPOSITE selector of the center unit to RGB. You can get a better picture quality by using Scart setting. • If Scart (RGB Input) is not equipped for your TV, set RGB-COMPOSITE selector to COMPOSITE. 11 Use this method if your TV have Pr, Pb and Y jacks. Method 3 Component Video (not supplied) ............... Best Quality If you television is equipped with Component Video inputs,connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding jacks on your television. COMPONENT IN Connecting to a TV (Con’t) P.SCAN (Progressive Scan) Function Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines. Press and hold P.SCAN button on the remote controller for over 5 seconds in stop mode. • Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan" repetitively. In interlaced-scan video, a frame consists of two interlaced fields (odd and even), where each field contains every other horizontal line in the frame. The odd field of alternating lines is displayed first, and then the even field is displayed to fill in the alternating gaps left by the odd field to form a single frame. One frame, displayed every 1/30th of a second, contains two interfaced fields, thus a total of 60 fields are displayed every 1/60th of a second. The interlaced scanning method is intended for capturing a still object. Interlaced Scan (1 FRAME = 2 FIELDS) The progressive scanning method scans one full frame of video consecutively down the screen, line by line. An entire image is drawn at one time, as opposed to the interlaced scanning process by which a video image is drawn in a series of passes. The progressive scanning method is desirable for dealing with moving objects. Progressive Scan (FULL FRAME) What is Progressive (or Non-Interlaced) Scanning? • This function works only on TVs equipped with component video inputs (Y, Pb, Pr) that support Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive scan TVs.) • Depending on the brand and model of your TV, this function may not work. Note • By default, the video format is set to "PAL". • Each time the button is pressed, the video format switches between "NTSC" and "PAL". • Each country has a different video format standard. • For normal playback, the video format of the disc must be the same as the video format of your TV. Turn off the main unit and then press NT/PAL on the Remote Control. Selecting the Video Format 12 CONNECTIONS Note • Component video is output only when P.SCAN function is selected. 13 14 Connect Audio In on the DVD player to Audio Out on the external analog component. • Be sure to match connector colors. 1 Example: Analog signal components such as a VCR, Camcorder, and TV. Connecting to an External Analog Component Connecting to External Components Audio Cable If the external analog component has only one Audio Out, connect either left or right. CONNECTIONS Press AUX to select AUX. • ‘AUX’ appears in the display. 2 Connecting the FM, AM Antennas FM antenna connection AM antenna connection 1. Connect the FM antenna supplied to the FM 75. COAXIAL terminal. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. 1. Connect the AM loop antenna supplied to the AM and terminals. 2. If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected). Snap the tabs on the loop into the slots of the base to assemble the AM lo...