Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
• Fast-forward: Press the or ] button. 6. When you have finished playback, press the STOP ( @ ) button. Recording on a Cassette Tape You can record sound of the CD, the Radio Broadcasting or sound from the external source (ex. AUX, USB) on the Cassette Tape. 1. Switch the system on by pressing the STANDBY/ON ( ) button. 2. Insert a blank cassette tape in the Cassette Deck. 3. Load a Disc, adjust the Radio frequency or connect theexternal source/USB device to the main unit. CD (See page 19) •• Press the CD on the main unit to select the CD function. •• Press the OPEN/CLOSE (^) button to open the Compact Disc tray. •• I nsert a CD and press the OPEN/CLOSE (^) button to close the Compact Disc tray. • Use the CD selection ( [ or ] ) buttons to select the desired song. Tuner (See page 26) •• Select TUNER by pressing the TUNER button on the main unit. •• Adjust the Radio frequency you want to record. USB Device (See page 32) •• Connect the external USB storage device to the USB jack 1 or the USB jack 2 on the main unit. •• Press the USB 1 or USB 2 button on the main unit to select the USB mode. •• Play a song on your USB device. External Source(See page 14) •• Connect an External Component/MP3 player to the main unit. •• Press the AUX button to select the AUX input. 444 Press the REC TO TAPE button on the main unit or the TAPE REC button on the remote control to start recording. You can record a CD on a cassette tape in two different ways. •• Direct recording: If you want to start recording the selected track directly, press the REC TO TAPE button. •• Synchronised recording: -- I.f you want to start recording from the current track, press and hold the REC TO TAPE button while in Play/Pause mode. -- If you want to start recording from the . rst track of the CD disc, press and hold the REC TO TAPE button while in Stop mode. -- .When CD Synchronized recording, just only the STOP, VOLUME and POWER buttons can work. -- When CD Synchronized recording, if you use the MIC, the MIC voice will be recorded together. -- If you want to record MIC voice, connect the MIC Jack before start recording. 555 To stop recording, press the STOP ( @ ) button. English 29 04 Basic Functions Setting the Clock For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. 1. Switch the system on by pressing the STANDBY/ON ( ) button. 2. Press and hold TIMER/CLOCK button and then press the ENTER button. Result: "CLOCK" is displayed. 3. Press ENTER. Result: The hour flashes. `` Decrease the hours: _ `` Increase the hours: + 4. When the correct hour is displayed, press ENTER. Result: The minutes flashes. `` Decrease the minutes: _ `` Increase the minutes: + 5. When the correct hour is displayed, press ENTER. Result: "TIMER" appears in the display. `` The current time is now set. ..NOTE `` You can display the time, even when you are using another function, by pressing and hold the TIMER/CLOCK button once. `` You can also use [ or ] on the front panel instead of buttons in step 3,4. Timer Function The timer enables you to switch the system on or off at specific times automatically. `` Before setting the timer, check that the current time is correct. `` For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. `` I f you no longer want the system to be switched on or off automatically, you must cancel the timer. Example: You wish to wake up to music every morning. 1. Switch the system on by pressing the STANDBY/ON ( ) button. 2. Press and hold the TIMER/CLOCK button and then press _ or + buttons until TIMER is displayed. 3. Press the ENTER ( ) button. Result: ON TIME is displayed for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time. 444 Set the timer switch-on time. a Press the _ or + button. b Press the ENTER ( ) button. Result: The minutes flash. c Press the _ or + button. d Press the ENTER ( ) button. Result: OFF TIME is displayed for a few seconds, followed by any switch-off time already set; you can now set the timer switch-off time. 555 Set the timer switch-off time. a Press the _ or + button. b Press the ENTER ( ) button. Result: The minutes flash. c Press the _ or + button. d Press the ENTER ( ) button. Result: VOL XX is displayed, where XX corresponds to the volume already set. 666 Press _ or + button to adjust the volume level and press the ENTER ( ) button. Result: The source to be selected is displayed. 777 Press the _ or + button to select the desired source to be played when the system switches on. `` FM (radio) : a Press the ENTER ( ) button. b Select a preset station by press the _ or + button. `` DVD/CD (compact disc): Load one or more compact discs. `` TAPE(cassette): insert a cassette tape. `` USB: Connect the USB device. 30 English Basic Functions 888 Press the ENTER ( ) button to confirm the timer. 999 Press the STANDBY/ON ( ) button to set the system to standby mode `` Stan...