Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
..when you connect iPod to USB port , it is not recharged. , Note The programs are also cleared when the disc or USB device is removed, the unit is powered off or the function is switched to others. , Sometimes INFO can not be executed to according to ID3 TAG version. , Operating 11 3 Operating Basic Operations CD/ USB Operations 1. Insert the disc by pressing OPEN/CLOSE on the remote control or R(OPEN/CLOSE) on the unit or connect the USB device to the USB port. 2. Select the CD or USB function by pressing FUNCTION on the remote control or FUNC. on the unit. 3. Select a file (or track) you want to play by pressing C/V on the remote control or / on the unit. To Do this Stop Press Z ENTER on the remote control or I on the unit. Playback Press d/M on the remote control or Ton the unit. Pause Press d/M on the remote control or Ton the unit. Skipping to the next/ previous track/ file During playback, press C/V on the remote control or / on the unit to go to the next track/ file or to return to the beginning of the current track/ file. Press C on the remote control or on the unit twice briefly to step back to the previous track/ file. Searching for a section within a track Press and hold C/V on the remote control or / on the unit during playback and release it at the point you want to listen. Searching for a section within a folder Press PRESET/FOLDER W/Sand then d/M on the remote control or Ton the unit. Playing repeatedly or randomly Press MENU/REPEAT on the remote control repeatedly, the display change in the following order, RPT1 -> RPT ALL -> RANDOM -> OFF Other Operations Programmed Playback The program function enables you to store your favorite files/tracks from any disc or USB device. A program can contain 64 files/tracks. 1. Insert a CD or USB and wait for it to be order. 2. Press PROGRAM/MEMO on the remote control in stop status. 3. Press C/V on the remote control or / on the unit in stop status. 4. Press PROGRAM/MEMO again to save and select a next file/track. 5. Press d/M on the remote control or Ton the unit to play the programmed music files. 6. To clear your selection, press ZENTER on the remote control or I on the unit twice. Note Displaying fi le information (ID3 TAG) While playing an MP3 file containing file information, you can display the information by pressing INFO. Note Turn off the sound temporarily Press @MUTE to mute your unit. You can mute your unit, for example, to answer the telephone, the “MUTE ON” or “MUTE OFF” is displayed in the display window. 12 Operating Radio Operations Listening to the radio 1. Press FUNCTION on the remote control or FUNC. on the unit until FM appears in the display window. The last received station is tuned in. 2. Press and hold TUN -/+ for about two seconds until the frequency indication starts to change, then release. Scanning stops when the unit tunes in a station. Or Press TUN -/+ repeatedly. 3 Operating 3. Adjust the volume by rotating VOL. on the unit or by pressing VOLUME W/S on the remote control repeatedly. Presetting the Radio Stations You can preset 50 stations for FM . Before tuning, make sure to turn down the volume. 1. Press FUNCTION on the remote control or FUNC. on the unit until FM appears in the display window. 2. Select the desired frequency by pressing TUN -/+. 3. Press PROGRAM/MEMO a preset number will flash in the display window. 4. Press PRESET/FOLDER W/S to select the preset number you want. 5. Press PROGRAM/MEMO The station is stored. 6. Repeat steps 2 to 5 to store other stations. 7. To listen a preset station, press PRESET/FOLDER W/S. Deleting all the saved stations 1. Press and hold PROGRAM/MEMO for two seconds. “ERASE ALL” will flash up on the unit display. 2. Press PROGRAM/MEMO to erase all saved radio stations. Improving poor FM reception Press d/M on the remote control or T on the unit. This will change the tuner from stereo to mono and usually improve the reception. Seeing information about a Radio station The FM tuner is supplied with the RDS (Radio Data System) facility. This shows information about the radio station being listened to. Press RDS repeatedly to cycle through the various data types. : PS (Programme Service Name) The name of the channel will appear in the display PTY (Programme Type Recognition) The programme type (e.g. Jazz or News) will appear in the display. RT (Radio Text) A text message contains special information from the broadcast station. This text may scroll across the display. CT ( Time controlled by the channel) This shows the time and date as broadcast by the station. You can search the radio stations by programme type by pressing RDS. The display will show the last PTY in use. Press PTY one or more times to select your preferred programme type. Press C/V on the remote control or on the unit. The tuner will search automatically. When a station is found the search will stop. / Operating 13 Sound adjustment Setting the surround mode This system has a number of pre-set surround sound fields. You can...