Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
2. Remove the USB device from the unit. Playable file MP3/WMA file requirement MP3/ WMA file compatibility with this unit is limited as follows : • Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz ( WMA) • Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps ( WMA) • Maximum files : Under 999 • File extensions : “.mp3”/ “.wma” • A protected file by DRM(Digital rights management) cannot be played on the unit. supported. • Do not extract the USB device while in operation. • For a large capacity USB, it may take longer than a few minutes to be searched. • To prevent data loss, back up all data. • This unit is not supported when the total number of files is 1000 or more. • The unit’s USB Port cannot be connected to PC. The unit can not be used as a storage device. • The exFAT file system is not supported on this unit. • Depending on some devices, it may not available to recognize the followings on this unit. -External HDD -Card readers -Locked devices -Hard type USB devices -USB hub -Using USB extension cable The resume point may be cleared when you pull out the power cord or removing the USB device from the unit. , Operating 13 3 Operating Basic operations USB operation 1. Connect the USB device to the USB port. 2. Select the USB function by pressing FUNCTION. 3. Select a file you want to play by pressing C or V. To Do this Stop Press Z. Playback Press d/M. Pause Press d/M during playback. Skipping to the next/previous file During playback, press C or V to go to the next file or to return to the beginning of the current file. Press C twice briefly to step back to the previous file. Searching for a section within a file Press and hold C/V during playback and release it at the point you want to listen to. Playing repeatedly or randomly Press REPEAT on the remote control repeatedly, the display change in the following order, RPT 1 RPT DIR (Directory) RPT ALL RANDOM OFF. Selecting files directly Press 0 to 9 numerical buttons on the remote control to go to the desired file directly. Resume playback The unit memorizes the point at which you've changed function or the unit had been turned off. Note Other operations DRC (Dynamic range control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [DRC ON] by using DRC. AV Sync When receiving audio signals from TV, sound and images may not be matched. In the case, this function can adjust the delay time. 1. Press AV SYNC. 2. Use C V to scroll up and down through the delay amount, which you can set at anything between 0 and 300 ms. Displaying file and input source You can display various information on the USB and OPTICAL IN 1/2 mode by pressing INFO. USB : MP3/ WMA containing file information OPTICAL IN 1/2 : Audio format, Audio channel Turn off the sound temporarily Press MUTE to mute your unit. You can mute your unit, for example, to answer the telephone, the “ ” is displayed in the display window. To cancel it, press MUTE again on the remote control or change the volume level. 14 Operating 3 Operating AUTO POWER On/Off Before operating this function, make sure that you have selected OPTICAL IN and turn on the AUTO POWER. This function automatically turns on/off the unit when you turn on/off the external device ( TV, DVD Player, Blu-ray Disc Player, etc.) connected to this unit by the optical cable. When turning on the unit by this function, Optical function is selected directly no matter what kind of function has been selected before turning off it. This function turns on or off each time you press AUTO POWER. Display Operation AUTO POWER ON AUTO POWER function is turned on. AUTO POWER OFF AUTO POWER function is turned off. yThis function is intentionally designed to turn off the unit after 1 minute of inactivity. If you did not connect external devices with optical cable or there is no digital audio signal going to the unit, the unit will turn off after 1 minute of inactivity if AUTO POWER function is turned on. yDepending on the connected device by the optical cable, this function may not operate. yOnce AUTO POWER is set, the unit will start as OPTICAL mode automatically next time, no matter what kind of function you selected before. yIt is not available to turn on the unit by AUTO POWER function if you turn off the unit directly. yAUTO POWER function is not supported on LG Sound Sync ( Wireless) mode. , Note Auto power down This unit will be off itself to save electric consumption in the case main unit is not connected to external device and is not used for 25 minutes. So does this unit after six hours since Main unit has been connected to other device using analog input. But the unit can turns on automatically based on the [AUTO POWER] function you've set. Sleep timer setting Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. To check the remaining time, press SLEEP. To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then pre...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - NB2431A (900.67 kb)