Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
repeatedly. 2 Select the tuning mode. Press TUNING MODE . repeatedly until “AUTO” appears. 3 Tune in the desired station. Press +/– (or TUNING +/– on the unit) .. Scanning stops automatically when a station is tuned in, and then “TUNED” and “STEREO” (for stereo programs) appear. When you tune in a station that provides RDS services, the station name appears on the display (European model only). 4 Adjust the volume. Press VOLUME +/– (or turn the VOLUME control on the unit) .. To stop automatic scanning Press . .. To tune in a station with a weak signal If “TUNED” does not appear and the scanning does not stop, press TUNING MODE . repeatedly until “AUTO” and “PRESET” disappear, and then press +/– (or TUNING +/– on the unit) . repeatedly to tune in the desired station. To reduce static noise on a weak FM stereo station Press FM MODE . repeatedly until “MONO” appears to turn off stereo reception. Playing a tape 1 Select a tape deck. Press TAPE (or TAPE A/B on the unit) . repeatedly. 2 Insert a tape. Press PUSH . . on the unit, and insert the TYPE I (normal) tape into the cassette holder with the side you want to play facing forward. Make sure there is no slack in the tape to avoid damaging the tape or the tape deck. Press PUSH . . on the unit again to close the cassette holder. 3 Start playback. Press . (or .. on the unit) .. Do not eject the tape during playback or recording, as this may cause irreparable damage to the tape and cassette holder. 4 Adjust the volume. Press VOLUME +/– (or turn the VOLUME control on the unit) .. Other operation To Press Pause playback . (or .. on the unit) .. To resume play, press the button again. Stop playback . .. Rewind or fast forward ./. .. Select Relay Play* PLAY MODE . repeatedly until “RELAY” appears. * After the playback of the front side of deck A, deck B plays the front side, and then stops. Using optional audio components 1 Connect additional audio component to the AUDIO IN jack . on the unit using an audio analog cord (not supplied). 2 Turn down the volume. Press VOLUME – (or turn the VOLUME control on the unit towards –) .. 3 Select the AUDIO IN function. Press AUDIO IN . on the unit. 4 Start playing the connected component. 5 Adjust the volume. Press VOLUME +/– (or turn the VOLUME control on the unit) .. Adjusting the sound To add a sound effect To Press Reinforce the bass and create a more powerful sound GROOVE . on the unit repeatedly until “GROOVE” appears. Set the surround effect SURROUND . on the unit repeatedly until “SURR” appears. Select the preset sound effect EQ . repeatedly. To cancel, press EQ . repeatedly until “EQ OFF” appears. To turn on the subwoofer (MHC-RG595/ RG495 only) Press SUBWOOFER . on the unit repeatedly until “SUB ON” appears. The SUBWOOFER indicator . on the unit lights up. If you later disconnect the subwoofer, repeat the procedure until “SUB OFF” appears. The volume of the subwoofer is linked to the front speakers. Changing the display To Press Change the illumination pattern around the VOLUME control . ILLUMINATION . on the unit repeatedly. Change information on the display* DISPLAY . repeatedly when the system is turned on. Change Display mode (See below.) DISPLAY . repeatedly when the system is turned off. * For example, you can view CD/MP3 disc information, such as the track or file number or folder name during normal play, or the total playing time while the player is stopped. The system offers the following display modes. Display mode When the system is off1), Demonstration The clock display is replaced by lighting and flashing of the display window. Clock The clock is displayed. Power Saving Mode2) The display is turned off to conserve power. The timer and clock continue to operate. 1) The STANDBY indicator . on the unit lights up when the system is off. 2) When the system is in Power Saving Mode, the following functions are unavailable: – setting the clock. – changing the AM tuning interval (except for European and Saudi Arabian models). – turning on the system by pressing the function buttons (for example, CD .). – changing the CD power manage function. – resetting the system to factory settings. Notes on the display information • The following are not displayed; – total playing time for a CD-DA disc depending on the play mode. – total playing time for an MP3 disc. – remaining playing time for an MP3 file. • The following are not displayed correctly; – elapsed playing time of an MP3 file encoded using a VBR (variable bit rate). – folder and file names that do not follow either the ISO9660 Level 1, Level 2 or Joliet in the expansion format. • The following are displayed; – ID3 tag information for MP3 files when ID3 version 1 and version 2 tags are used. – up to 30 characters of ID3 tag information using uppercase letters (A to Z), numbers (0 to 9), and symbols (. $ % ’ ( ) * , – . / < = > @ [ \ ] _ ` { | } ! ? ^). 16GB Other Operations Creating your own CD program (Program Play) Use buttons on the remote to create your own prog...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - MHC-RG495 (909.73 kb)
Stereoanlage - MHC-RG295 (909.73 kb)