Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Fotos und technische Daten Sony CMT-GS10 |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
repeatedly to set the hour, and right volumes are unbalanced. function, and press . (or CD . on the unit) .. SET TIMER : You tried to select the timer when the Play remove the disc, and leave the system turned on for then press ENTER .. .Place the speakers as symmetrically as possible. Timer is not set. about an hour until the moisture evaporates. The minute indication flashes. Use the procedure .Connect only the supplied speakers. TIME NG : The Play Timer start and end times are set to To cancel Program Play above to set the minutes. the same time. On heat buildup Press PLAY MODE . repeatedly until “PGM” disappears while the player is stopped. 5 Use the same procedure as in step 4 to set the time Severe hum or noise. .Heat buildup on the unit during operation is normal to stop playing. .Move the system away from sources of noise. Display examples and is not cause for alarm. .Connect the system to a different wall socket. Display indicates .Do not touch the cabinet if it has been used To delete the last track or file of the program 6 Select the sound source. continuously at a high volume because the cabinet may .Install a noise filter (available separately) to the power 2 (two) Press CLEAR . on the remote while the player is Press ./.. repeatedly until the desired have become hot. cord. stopped. sound source appears, and then press ENTER .. The 5 (five) .Do not obstruct the ventilation holes. display shows the timer settings. The remote does not function. 6 (six) On the speaker system track number of the program remote sensor . on the unit, and position the unit To view program information, such as total 7 Press .... to turn off the system. .Remove any obstacles between the remote and the This speaker system is not magnetically shielded, and 8 (eight) If the system is on at the preset time, the Play Timer Press DISPLAY . repeatedly. away from fluorescent lights. the picture on nearby TV sets may become magnetically will not play. 0 (zero) distorted. In this situation, turn off the TV, wait 15 to 30 .Move the remote closer to the system. .Point the remote at the system’s sensor. minutes, and turn it back on. A To activate or check the timer again If there is no improvement, move the speakers far away Presetting radio stations Press CLOCK/TIMER SELECT ., press ./.. B from the TV. repeatedly until “PLAY” appears, and then press ENTER CD/MP3 player You can preset your favorite radio stations and tune .. D Cleaning the cabinet them in instantly by selecting the corresponding preset The sound skips, or the disc will not play. Clean this system with a soft cloth slightly moistened number. .Wipe the disc clean, and replace it. G To cancel the timer with a mild detergent solution. Do not use any type Use buttons on the remote to preset stations. .Move the system to a location away from vibration (for Repeat the same procedure as above until “OFF” appears, H of abrasive pad, scouring powder, or solvent, such as 1 Tune in the desired station (See “Listening to the and then press ENTER .. example, on top of a stable stand). thinner, benzine, or alcohol. radio”). .Move the speakers away from the system, or place them K on separate stands. At high volume, speaker vibration M 2 Press TUNER MEMORY .. To change the setting may cause the sound to skip. Start over from step 1. Preset number O Play does not start from the first track. Tip Q manually. Specifications The Play Timer setting remains as long as the setting is not canceled .Return to Normal Play by pressing PLAY MODE . repeatedly until both “PGM” and “SHUF” disappear. Main unit R Amplifier section Canadian model: Starting playback takes more time than usual. S Continuous RMS power output (reference): 50 + 50 W (6 ohms at 1 kHz, .The following discs take a longer time to start playback. 10% THD) 3 Press +/. (or TUNING + or .on the unit) . Z European and Russian models: .a disc recorded with a complicated tree structure. repeatedly to select your desired preset number. DIN power output (rated): 45 + 45 W (6 ohms at 1 kHz, DIN) .a disc recorded in multisession mode. | Continuous RMS power output (reference): 50 + 50 W (6 ohms at 1 kHz, .a disc that has not been finalized (a disc to which data 10% THD) If another station is already assigned to the selected preset number, the station is replaced by the new ” Music power output (reference): 75 + 75 W can be added). Other models: stations. $ .a disc that has many folders. The following are measured at 240 V AC, 50/60 Hz (Australian model), 4 Press ENTER .. 220 V AC, 60 Hz (Korean model), 220 V AC, 50/60 Hz (Argentine model), % 127 V AC, 60 Hz (Mexican Model), 120 V or 240 V AC, 50/60 Hz (other The disc tray does not open and “LOCKED” 5 Repeat steps 1 through 4 to store other stations. models) appears. , DIN power output (rated): 45 + 45 W (6 ohms at 1 kHz, DIN) You can preset up to 20 FM and 10 AM stations. The Continuous RMS power output (reference): 50 + 50 W (6 ohms at 1 kHz, .Contact your Sony dealer or local authorize...