Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Fotos und technische Daten Sony MHC-EC77 |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
voltage selector the indicated corrective action. “CD POWER OFF” appears. With CD player power thinner, or commercially available cleaners or anti-With 8 ohm loads, both channels driven, from 120 – 10,000 Hz; 60 watts Other models: AC 120, 220 or 230 – 240 V, 50/60 Hz, adjustable with voltage Use buttons on the remote to create your own program. turned off, disc access time is increased. To turn on static spray intended for vinyl LPs. per channel minimum RMS power, with no more than 0.7% total harmonic selector Use buttons on the unit to control tape recording. If the issue persists, contact your nearest Sony dealer. distortion from 250 milliwatts to rated output. CD player power, repeat the procedure until “CD .Do not expose discs to direct sunlight or heat sources High channel Power consumption: 1 Press CD . to select the CD function. 1 Insert a recordable tape into the cassette holder POWER ON” appears. such as hot air ducts, nor leave it in a car parked in With 8 ohm loads, both channels driven, from 2,000 – 13,000 Hz; 60 watts MHC-GX99 If the STANDBY indicator flashes 2 Press PLAY MODE . repeatedly until “PGM” appears with the side you want to record facing up. per channel minimum RMS power, with no more than 0.7% total harmonic direct sunlight. USA model: 190 W distortion from 250 milliwatts to rated output. while the player is stopped. Immediately unplug the power cord, and check the Canadian model: 245 VA 2 Prepare the recording source. To reset the system to factory settings AUDIO POWER SPECIFICATIONS following item. On safety SA-WG99 (Subwoofer) 3 Press DISC SKIP . to select a disc. Select the desired source to record. POWER OUTPUT AND TOTAL HARMONIC DISTORTION: If the system still does not operate properly, reset the USA model: 115 W .If your system has a voltage selector, is the voltage .The unit is not disconnected from the AC power source (MHC-EC55 The United States model only) 4 Press ./.(or ./.on the unit) . Place the disc you want to record and press DISC system to factory settings. Canadian model: 155 VA With 6 ohm loads, both channels driven, from 120 – 10,000 Hz; 45 watts selector set to the correct voltage? (mains) as long as it is connected to the wall outlet, Use buttons on the unit to reset the unit to its factory per channel minimum RMS power, with no more than 0.7% total harmonic MHC-EC77 repeatedly until the desired track number appears. SKIP/EX-CHANGE . to select a disc. After the STANDBY indicator . on the unit stops even if the unit itself has been turned off. distortion from 250 milliwatts to rated output. USA model: 190 W default settings. When recording a folder from an MP3 disc, press flashing, reconnect the power cord, and turn on the When programing MP3 files, press +/– . .Completely disconnect the power cord (mains lead) Canadian model: 245 VA repeatedly to select the desired folder, and then select PLAY MODE . repeatedly to select “ ,” and then European and Russian models: 140 W system. If the issue persists, contact your nearest Sony 1 Disconnect and reconnect the power cord, and then from the wall socket (mains) if it is not going to be used Amplifier section 0.5 W (in Power Saving Mode) press +/– . repeatedly to select the desired dealer. the desired file. turn on the system. for an extended period of time. When unplugging the MHC-GX99 Other models: 150 W folder. unit, always grip the plug. Never pull the cord itself. Front speaker: 2 Press PLAY MODE ., FUNCTION ., and .... at RMS output power (reference): MHC-EC55 Selected track or file number To record only your favorite CD tracks or MP3 files in .Should any solid object or liquid get into the system, USA model: 95 W the same time. Low channel your desired order, perform steps 2 to 5 of “Creating General unplug the system, and have it checked by qualified Canadian model: 130 VA 95 W + 95 W (per channel at 8 ., 1 kHz, 10% THD) All user-configured settings, such as preset radio European and Russian models: 95 W your own CD program.” personnel before operating it again. High channel 0.5 W (in Power Saving Mode) The system does not turn on. Other models: 95 W stations, timer, and the clock, are deleted. 95 W + 95 W (per channel at 8 ., 8 kHz, 10% THD) 3 Start recording. .The AC power cord can be changed only by a qualified Subwoofer: .Is the power cord plugged in? service facility. RMS output power (reference): Dimensions (w/h/d) (excl. speakers): Press . (record) ., and then start playing the 150 W (at 6 ., 80 Hz, 10% THD) Approx. 200 . 306 . 410 mm . Is the voltage selector set correctly to match the desired recording source. On placement MHC-EC77 Mass (excl. speakers): Total playing time of the local power line voltage? Saudi Arabian models also North American model: The CD starts playing automatically after 10 seconds may not turn on when the voltage selector is set to .Do not place the system in an inclined position or in MHC-GX99 selected track RMS output power (reference): North American model: Approx. 6.1 kg ha...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - MHC-EC55 (724.78 kb)
Stereoanlage - MHC-GX99 (724.78 kb)