Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
magnetic field affects the television displayed. • Center speaker:Connect the center picture, increase the distance between the . The test signal will last for about 90speaker. TV and the speakers. seconds. English DOLBY PRO LOGIC When you have completed the Dolby Pro Logic setup, you are ready to enjoy Home Cinema sound. • Press DPL (PRO LOGIC) repeatedly to DPL MU select and cycle through Dolby Center Phantom This setting is for use without the center speaker. It redistributes the center speaker sound to the left and right speakers, providing conventional stereo across the front. Normal Stereo This setting is for normal stereo sound without Dolby Pro Logic. It only requires the left and right speakers. • Press DPL to select the Stereo mode. BALANCE L R . The message the various sound modes. S S L R C PRO LOGIC • Press DPL to select the Dolby Pro Logic “STEREO” Center Phantom mode. will be Dolby Surround . Center . The message displayed. Phantom . Dolby 3 Stereo . “CENTER S S L R C PRO LOGIC The DPL display . Stereo . Dolby Surround … PHANTOM” panel will light will be up. . The Dolby Pro Logic display panel displayed. will light up with the selection. . The DPL display Important! panel will light 1 For the best Dolby Pro Logic sound, Dolby Surround up. switch on DPL with DSC set to This setting is for a full Dolby Surround Pro “Classic” . Logic mode. 2 Dolby Pro Logic mode will Dolby 3 Stereo automatically switch to normal • Press DPL to select the Dolby Surround Use this setting when full surround is not Stereo mode when headphones are mode. required, but a wide stereo sound is connected. . The message desired. It only requires the left, right and S S L R C PRO LOGIC 3 Switch to normal stereo mode when “DOLBY center speakers. you record on a tape. SURROUND” • Press DPL to select the Dolby 3 Stereo will be mode. displayed. . The message S S L R C PRO LOGIC . The DPL display “DOLBY 3 panel will light STEREO” up. will be displayed. ™ The DPL display panel will light up. English DISC CHANGE DISC 1 DISC 2 DISC 3 OPEN•CLOSE TAPECD PROG CLOCK/ TIMER STANDBY ON TUNER AUX PRESET ss STOP•CLEARSEARCH • TUNING PLAY PAUSE PREV NEXT DC3CHANGER MINI HIFI SYSTEM CD1 • 2 • 3 VIDEOBAND TAPE 1 • 2 VOLUME TIMER 60Hz 500Hz250Hz 1KHz 2KHz 4KHz 8KHz SHUFFLEPROGRAM SOUND NAVIGATION DYNAMIC BASS BOOST DIGITAL SOUND CONTROL UP DOWN SSS S L R C PRO LOGIC Warning! 1) This system is designed for conventional CDs. Do not use any accessories such as disc stabilizer rings or CD treatment sheets, etc., which may damage the CD mechanism. 2) Do not load more than one disc into each tray. 3) When the CD changer is loaded with CDs, do not turn over or shake the system. This may jam the changer. Y ou may load thr ee discs in the CD changer for continuous playback without interruption. Discs for playback This system can play all audio CD, finalized audio CD-Recordable and finalized audio CD-Rewritable format discs. Loading the CD Changer 1 Press CD to select CD mode. 2 Press OPEN•CLOSE . . The CD carousel slides out. 3 Load a CD with the printed side up in the right tray. • You can load another disc in the left tray. • To load the third disc, press the DISC CHANGE button. . The CD carousel will rotate until the empty tray is ready for loading. 4 Press OPEN•CLOSE to close the CD carousel. . The total number of tracks and the playing time of the last selected disc appear on the display. Note: – To ensure good system performance, wait until the CD changer completely reads the disc(s) before proceeding. CD Direct Play You can play a CD directly by pressing the DISC 1 , DISC 2 or DISC 3 button. The CD player will stop at the end of playback of the selected disc. – A lit button indicates that a disc is loaded in the disc tray. CD Playing a CD 1 Press PLA Y .to start playback. . The disc tray, track number and elapsed playing time of the current track appear on the display. • To interrupt playback, press P AUSE .. . The playing time flashes. • To resume playback, press PLA Y . again. 2 To stop playback, press STOP•CLEAR .. Note: – All the available discs will play once, then stop. Disc Change You can change the outer two discs while the third inner disc is stopped or is playing. 1 Press DISC CHANGE . . The CD carousel slides out. 2 Replace the discs in the left and right disc trays. • If you press DISC CHANGE again during playback, the CD will stop playing. . The CD carousel will rotate until the inner tray is rotated out and is ready for loading. 3 Press OPEN•CLOSE to close the CD compartment. CD English Selecting a desired track Selecting a desired track when playback is stopped 1 Press PREV .or NEXT .until the desired track appears on the display. 2 Press PLAY .to start playback. . The selected track number and elapsed playing time appear on the display. Selecting a desired track during playback • Press PREV .or NEXT .until the desired track appears on the display. . The selected track number and elapsed playing time appear on the display. • If yo...