Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Tuning to radio stations 1 Select TUNER source. . is displayed. TUNER 2 Press BAND (TUNER on the remote control) once or more to select your waveband. 3 Turn TUNING 0 to tune to a station. . Display shows: the frequency of the tuned station. Maintenance Cleaning the Cabinet Cleaning the disc lens . Use a soft cloth slightly moistened with a mild . After prolonged use, dir t or dust may detergent solution. Do not use a solution accumulate at the disc lens.To ensure good containing alcohol, spirits, ammonia or abrasives. playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available Cleaning Discs cleaner. Follow the instructions supplied with . When a disc becomes dir ty, cleaner. clean it with a cleaning cloth. Wipe the disc from the centre out. . Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. 14 Clock/Timer AUX-IN MCMICRO SY STEM iR108 M Setting the clock 1 In Standby mode, press PROG/CLOCK button. . The clock digits for the hours flash. 2 Press .1 / 2™ to set the hours. 3 Press PROG/CLOCK again. . The clock digits for the minutes flash. 4 Press .1 / 2™ to set the minutes. 5 Press PROG/CLOCK to confirm the time. Note: – If the clock has not been set, -- --:-- -- will be displayed. Setting the timer . The system can be used as an alarm clock. CD or TUNER can be set to switch on at a preset time. The clock time needs to be set first before the timer can be used. . If no button is pressed within 90 seconds during timer setup, the system will exit timer setting mode automatically. 1 In any mode, press TIMER on the remote control for more than 2 seconds. 2 Press .1 / 2™ (or CD / TUNER on the remote control) to select sound source. 3 Press TIMER to confirm your desired source. . The clock digits for the hour s flash. 4 Press .1 / 2™ to set the hours. 5 Press TIMER again. . The clock digits for the minutes flash. 6 Press .1 / 2™ to set the minutes. 7 Press TIMER to confirm the time. . The timer is now set and actiated. Notes: -If source CD is selected and no disc is in the CD tray or the disc has an error,TUNER will be selected automatically. -At the set time of wake up, the set will turn on at volume level 12. To activate and deactivate timer . In standby or during playback, press TIMER once. . Display shows if activated, and disappears if deactivated. Activating and deactivating SLEEP The sleep timer enables the system to switch off by itself after a set period of time.The clock time needs to be set first before the sleep timer can be used. . Press SLEEP on the remote control repeatly to select desired time before system shuts off. . Display shows SLEEP and series of time options for selection: SLEEP TIMER , , , , , ... . To deactivate, press SLEEP on the remote control once or more until “ “ is shown, or press STANDBY ON on the system or remote control. English 15 Specifications English AMPLIFIER Output power .................................................... 2 x 15W .................................................................. 30W total power Signal-to-noise ratio .......................... . 62 dBA (IEC) Frequency response ......... 60 – 16000 Hz, ± 3 dB Impedance loudspeakers ......................................... 4 . Impedance headphones ................. 32 . – 1000 . CD PLAYER Frequency range .................................. 20 – 20000 Hz Signal-to-noise ratio ............................................ 75 dBA TUNER FM wave range ................................... 87.5 – 108 MHz MW wave range ................................ 531 – 1602 kHz Sensitivity at 75 . – mono, 26 dB signal-to-noise ratio ............ 2.8 .V – stereo, 46 dB signal-to-noise ratio ........ 61.4 .V Selectivity ................................................................. . 28 dB Total harmonic distor tion ..................................... . 5% Frequency response ..... 63 – 12500 Hz (± 3 dB) Signal-to-noise-ratio .......................................... . 40 dB SPEAKERS Bass reflex system Dimensions (w x h x d)....150 x 150 x 200 (mm) GENERAL INFORMATION AC Power ...................................... 220 - 230V / 50 Hz Dimensions (w x h x d) .. 150 x 150 x 244 (mm) Weight (with/without speakers) .................................. ............................................................... approx. 6.2 / 2.9 kg ECO power consumption ................................ < 1 W Subject to modification 16 Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre. Problem Solution . Inser t a disc. . Check if the disc is inser ted upside down. . Wait until the moisture condensation...