Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
• You may also press to cancel repeat/ shuffle play. Tip •• Shuffle play is not available when programmed tracks are played. Program tracks You can program a maximum of 20 tracks. 1 In CD/USB mode, in the stop position, press PROG/CLOCK SET to activate the program mode. »» [PROG] (program) and track number begin to blink. 2 For MP3 tracks, press to select an album. 3 Press / to select a track number, then press PROG/CLOCK SET to confirm. 4 Repeat steps 2 to 3 to program more tracks. 5 Press to play the programmed tracks. »»During play, [PROG] (program) is displayed. • To erase the program, in the stop position, press . »» [PROG] disappears on the display. 14 EN 5 Adjust sound Adjust volume 1 During play, press VOL +/- to increase/ decrease the volume. Select a preset sound effect 1 During play, press DSC repeatedly to select a preset sound setting. Enhance bass 1 During play, press DBB to turn dynamic bass enhancement on or off. »» If DBB is activated, DBB is displayed. Mute sound 1 During play, press to mute/restore the speakers. 6 Listen to radio Listen to DAB radio DAB (Digital Audio Broadcasting) radio broadcasts radio digitally through a network of transmitters. Store DAB stations Before you can listen to DAB radio, store DAB stations onto the unit. If you connect the unit to AC power supply and no DAB station is stored, the unit prompts you to search and store all the available DAB stations (see "Get started" > "Store DAB stations"). Or 1 Press FM/DAB to turn on DAB radio. 2 Press MODE/SCAN. »»The unit begins to perform a search. »»When all the available DAB stations are stored, the first stored DAB station is broadcast. Tip •• The signal icon (*) is displayed, and its position indicates a degree of signal strength. The further towards the right, the stronger the signal strength. •• If no DAB coverage is currently available or no DAB station is found, [NO DAB] (no DAB) is displayed. Tune to a DAB station After DAB stations are stored, you can tune to a DAB station. 1 In DAB mode, press / repeatedly until a station name is displayed. 15 English EN 2 Press OK to confirm the selection. »»The radio immediately tunes to the selected station. Note •• Position the antenna as far as possible from TV, VCR, or other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna. Program DAB stations manually You can program a maximum of 20 preset DAB stations. 1 Tune to a DAB station. 2 Press PROG/CLOCK SET to activate program mode. 3 Press to allocate a number (1-20) to this radio station, and then press PROG/ CLOCK SET to confirm. 4 Repeat the above steps to program other stations. Note •• If a DAB station is stored under a preset location, a new DAB station assigned to this location overwrites the old DAB station. •• DAB station presets do not overwrite FM presets. Select a preset DAB station After the DAB stations are programmed on the unit, you can select a preset DAB station. 1 In DAB mode, press to select a preset number. Display DAB information In DAB mode, you may press RDS/DISPLAY repeatedly to select different information for the current DAB station. Use the DAB menu 1 In DAB mode, press MENU. »»The first menu option is displayed. 2 Press / repeatedly to display the menu options: • [FULL SCAN] (full scan): search and store all the available DAB stations. • [MANUAL] (manual): manually tune to a DAB station. • [DRC]: add or remove a degree of compensation for differences in the dynamic range between DAB stations. You may experiment with the options on different source materials to decide which option suits best. • [SYSTEM] (system): reset all DAB settings to the default settings made at the factory; display the software version of this unit; enter a stage of software upgrade. • [STATION] (station): display a list of available DAB stations. 3 Press OK to confirm the selection. 4 If a sub-option is available, repeat step 2 and step 3. Update software (if available) Software update for your radio may be available in future. How to know a software update: • register this unit at Philips website (with a valid email address, and you may receive software update notification if available. Or, • visit Philips website constantly to check if the updating information is provided. To update software of your radio, follow these steps strictly: 1 Read carefully the software update instructions on Philips website. 16 EN 2 Download the software update to your PC, and then connect the unit to the PC via the USB connector. 3 In DAB mode, press MENU. 4 Select [SYSTEM] (system) > [UPGRADE] (upgrade), and then follow the instructions displayed to go to the upgrade stage. • To select an option, press / ; to confirm a selection, press OK. 5 On the PC, follow the instructions on the screen to complete upgrade. Listen to FM radio Tune to a FM station 1 Press FM. 2 Press and hold / for more than 2 seconds. »» [SEARCH] (search) is displayed. »»The radio tunes to a station ...