Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Start playing the connected component. Tip If you cannot select “VIDEO” by pressing FUNCTION repeatedly, turn off the system and then press ?/1 on the unit while holding down FUNCTION on the unit. The function will change from “MD” to “VIDEO”, and “VIDEO” will appear in the display. To change back to “MD”, repeat the same procedure. However, you cannot switch the MD/VIDEO function in Power Saving Mode. 22GB Troubleshooting Problems and remedies Should you encounter a problem with your system, do the following: 1 Make sure the power cord and speaker cords are correctly and firmly connected. 2 Find your problem in the troubleshooting checklist below and take the indicated corrective action. If the problem persists after doing all of the above, consult your nearest Sony dealer. When the ?/1 indicator flashes Immediately unplug the power cord and check the following items. • If your system has a voltage selector, is the voltage selector set to the correct voltage? Check the voltage for your region, then make sure the voltage selector is set correctly. • Are the + and – speaker cords shortcircuited? • Are you using the supplied speakers? • Is anything blocking the ventilation holes on the rear of the system? Check all the above items and fix any problems found. After ?/1 indicator stops flashing, reconnect the power cord and turn on the system. If the indicator still flashes, or if the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer. General “– –:– –” appears in the display. • A power interruption has occurred. Set the clock (page 8) and timer settings (pages 19 and 20) again. There is no sound. • Press VOLUME + on the remote repeatedly (or turn VOLUME on the unit clockwise). • Make sure the headphones are not connected. • Check the speaker connections (page 6). Sound comes from one channel, or unbalanced left and right volume. • Place the speakers as symmetrically as possible. • Connect the supplied speakers. There is severe hum or noise. • Move the system away from the source of noise. • Connect the system to a different wall outlet. • Install a noise filter (commercially available) to the power line. The timer cannot be set. • Set the clock again (page 8). The timer does not function. • Press CLOCK/TIMER SELECT on the remote to set the timer and light up “c PLAY” or “c REC” in the display (pages 19 and 20). • Check the timer setting and set the correct time (pages 19 and 20). • Cancel the Sleep Timer function (page 18). • Make sure the clock is correctly set. The color on the TV screen is irregular. • Move the speakers farther away from the TV set. The remote does not function. • Remove the obstacle. • Move the remote closer to the system. • Point the remote at the system’s sensor. • Replace the batteries (R6/size AA). • Locate the system away from the fluorescent light. Speakers Sound comes from one channel, or the left and right volumes are unbalanced. • Check the speaker connections and placement. CD/MP3 player “LOCKED” appears. • Contact your Sony dealer or local authorized Sony service facility. Troubleshooting continued 23GB Play does not start. • Eject the disc and check whether a disc is loaded. • Wipe the disc clean (page 27). • Replace the disc. • Load the disc that this system can play (page 4). • Load the disc correctly. • Load the disc with the label side up. • Remove the disc and wipe away the moisture on the disc, then leave the system turned on for a few hours until the moisture evaporates. • Press N (or CD/NX on the unit) to start play. Disc access takes a long time. • Set “CD POWER” and “ON” by the CD power manage function (page 13). The sound skips. • Wipe the disc clean (page 27). • Replace the disc. • Try moving the system to a place without vibration (e.g., on top of a stable stand). • Try moving the speakers away from the system, or placing them on separate stands. When you listen to a track with bass sounds at high volume, the speaker vibration may cause the sound to skip. Play does not start from the first track. • Press PLAY MODE repeatedly until both “PGM” and “SHUF” disappear to return to Normal Play. MP3 audio track cannot be played back. • CMT-GPX5 does not play MP3 audio. • Recording was not performed according to the ISO 9660 level 1 or level 2 format, or Joliet in the expansion format. • The MP3 audio track does not have the extension “.MP3”. • The data is not stored in MP3 format. • Discs containing tracks other than MPEG1, 2 Audio Layer-3 files cannot be played. MP3 audio tracks take longer to play back than others. • After the system reads all tracks on the discs, playback may take more time than usual if: – the number of albums or tracks on the disc is very large. – the album and track organization structure is very complex. The album title, track title and ID3 tag do not appear correctly. • Use a disc that conforms with ISO 9660 level 1, level 2, or Joliet in the expansion format. • The disc ID3 tag is not ver...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - CMT-GPX5 (362.59 kb)
Stereoanlage - CMT-GPX7 (362.59 kb)