Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Switch to standby • Press again to switch the unit to standby mode. »»The clock (if set) appears on the display panel. Switch to ECO Power mode: • Press and hold for more than three seconds. »»[ECOPOWER] (Eco Power) is displayed briefly. Tip ••The unit switches to Eco Power mode after 15 minutes in standby mode. Switch between standby mode and Eco Power mode: • In standby/Eco Power mode, press and hold to switch the unit to Eco Power/ standby mode. Demonstrate the unit's features • In standby mode, press /MENU until [WELCOME TO PHILIPS] (welcome to Philips) scrolls from the right to the left on the display, and then [DEMO ON] (demo on) is displayed briefly. »»This system's features are displayed one by one. • To turn off the demonstration, press /MENU again. EN 4 Play Play a disc 1 Press SOURCE repeatedly to select DISC source. 2 Press to open the disc compartment. 3 Insert a disc with the printed side facing upward. 4 Press to close the disc compartment. 5 Play starts automatically. If not, press . Pause/resume play • During play, press to pause/resume play. Skip to a track For CD: • Press / to select another track. • You can also press / on the main unit to select another track. • You can also press numeric keypad to select a track directly. For MP3 disc and USB: 1 Press PRESET/ALBUM / to select an album or a folder. 2 Press / to select a track or a file. Note ••You can press numeric keypad directly to select a track or a file from the current album or folder. Search within a track 1 During play, press and hold / . 2 Release to resume normal play. Program tracks Note ••You can program tracks only when the play stops. You can program a maximum of 20 tracks. 1 Press PROG to activate the program mode. »»[PRG] (program) is displayed. 2 For MP3/WMA tracks, press PRESET/ALBUM / to select an album. 3 Press / to select a track, then press PROG to confirm. 4 Repeat steps 2 to 3 to program more tracks. 5 Press to play the programmed tracks. »»During play, [PRG] (program) is displayed. • To erase the program, in the stop position, press /MENU. Display play information • During play, press RDS/DISPLAY repeatedly to select different play information. • For CD: Lap time of the current track, lap time remaining of the current track, lap time remaining of all tracks. • For MP3 disc and USB: ID3 information, such as [TITLE] (title), [ALBUM] (album), [ARTIST] (artist). Select repeat/shuffle play options 1 During play, press MODE repeatedly to select a repeat option or the shuffle play mode. • REP: the current track is played repeatedly. EN • REP ALL: all tracks are played repeatedly. • REP ALB: all tracks in the album are played repeatedly. • SHUF: all tracks are played randomly. 2 To resume normal play, press MODE repeatedly until no option is displayed. Play from USB Note •• Make sure that the USB device contains playable audio content. 1 Insert the USB mass storage device into the socket. 2 Press SOURCE repeatedly to select the USB source. »»Play starts automatically. If not, press . • To select a folder, press PRESET/ ALBUM / . • To select an audio file, press / . Note ••You can press numeric keypad directly to select a file from the current folder. Play from a Bluetooth device You can listen to a Bluetooth device through the unit. Note ••Before you connect a Bluetooth device to the unit, familiarize yourself with the Bluetooth capabilities of the device. ••Keep the unit away from other electronic devices that may cause interference. ••The effective operation range between the unit and the paired device is approximately 10 meters (30 feet). ••Any obstacle between the unit and the device can reduce the operational range. 1 Press SOURCE repeatedly to select Bluetooth source. 2 Activate the Bluetooth function on your Bluetooth device (see the device user manual). 3 Select "BTM5000" on your device for pairing. »»The Bluetooth indicator lights up. »»[CONNECT] displays on the screen. • For some devices, you may need to input "0000" as the pairing password. 4 Start music play on your Bluetooth device. BTM50000000PIN EN Tip ••If the unit switches from Bluetooth source to other sources, the connected Bluetooth device disconnects automatically. ••The system can memorize up to 8 previously connected Bluetooth devices. To clear Bluetooth pairing history: Press and hold . »»The current Bluetooth connection is disconnected. »»After successful clearing, [CLEAR BLUETOOTH PAIRED LIST SUCCESSFULLY] (Clear Bluetooth paired list successfully) scrolls on the screen. 5 Listen to radio Tune to a radio station 1 Press SOURCE repeatedly to select the tuner source. 2 Press and hold / for more than 2 seconds. »»[SEARCH] (search) is displayed. »»The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. Tip ••To tune to a weak station, press / repeatedly until you find optimal reception. Program radio stations automatically You can program a maximum of 20 preset radio stations (FM). • In tuner mode...