Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
1 In CD or USB mode, press to stop playback. 2 Press PROG to activate the programming mode. » [PROG] (program) is displayed. 3 For MP3/WMA tracks, press / repeatedly to select an album. 10 EN 4 Press / repeatedly to select a track, then press PROG to confirm. 5 Repeat steps 3 to 4 to program more tracks. 6 To play the programmed tracks, press . » During play, [PROG] (program) is displayed. • To erase the program, press when playback is stopped. Adjust sound During play, you can adjust volume and select sound effects. Function Action To increase/decrease volume Press VOL +/-. To mute/restore sound Press . To turn dynamic bass en-Press DBB. hancement on/off To select a sound effect: Press DSC [POP] (pop) repeatedly. [JAZZ] (jazz) [CLASSIC] (classic) [ROCK] (rock) [FLAT] (flat) Display different information During play, press DISPLAY repeatedly to view time and different play information. 5 Listen to FM radio Tune to FM radio stations Note • Position the antenna as far as possible from TV, VCR, or other radiation source. • Make sure that you have connected and fully extended the supplied FM antenna. 1 Press FM to select FM tuner mode. 2 Press and hold / for 3 seconds. » [SEARCH] (search) is displayed. » The unit tunes to an FM station with strong reception automatically. 3 Repeat step 2 to tune to more stations. To tune to a station with weak signal: Press / repeatedly until you find good reception. Program FM radio stations automatically Note • You can program a maximum of 20 preset FM radio stations. In FM tuner mode, press and hold PROG for 3 seconds. » [AUTO] (auto) is displayed. » The unit stores all the FM radio stations automatically and then broadcasts the first preset radio station. English EN 11 Program FM radio stations manually 1 In tuner mode, tune to an FM radio station. 2 Press PROG to activate programming mode. » [PROG] (program) blinks. 3 Press / repeatedly to select a channel number. 4 Press PROG again to confirm. 5 Repeat steps 1-4 to store other FM stations. Note • To remove a pre-stored station, store another station in its place. Select a preset radio station In tuner mode, press / or the numeric buttons to select a preset radio station. Show RDS information RDS (Radio Data System) is a ser vice that allows FM stations to show additional information. If you tune to an RDS station, an RDS icon is displayed. 1 Tune to an RDS station. 2 Press RDS repeatedly to scroll through the following information (if available): » Program ser vice » Program type such as [NEWS] (news), [SPORT] (spor t), [POP M] (pop music)... » Radio text message » Time Select stereo/mono broadcast Note • Stereo broadcast is the default setting for tuner mode. • For stations with weak signals: to improve the reception, change to monaural sound. In FM tuner mode, press OK to switch between mono and stereo broadcast. 12 EN 6 Other features Set the alarm timer This unit can be used as an alarm timer.You can select CD, FM tuner, iPod/iPhone, or USB as alarm source. Note • Make sure that you have set the clock correctly. 1 In standby mode, press and hold TIMER until [SET TIMER] (set timer) scrolls on the display. » [SELECT SOURCE] (select source) is displayed. 2 Press SOURCE repeatedly or the source selection buttons on the remote control to select a source: disc, FM tuner, iPod/iPhone, or USB. 3 Press TIMER to confirm. » The hour digits blink. 4 Press / repeatedly to set the hour. 5 Press TIMER to confirm. » The minute digits blink. 6 Repeat steps 4-5 to set the minute and alarm volume. Note • If the system is idle for 90 seconds, the unit exits alarm setting mode automatically. • If iPod/iPhone is selected as alarm source, and you have created a playlist called "PHILIPS" in iTunes and impor t it to your iPod/iPhone, you will wake to a random track in the playlist. • If no "PHILIPS" playlist is created in the iPod/iPhone or no track is stored in the playlist, you will wake to your last listened track on the iPod/iPhone. To activate or deactivate the alarm timer: In standby mode, press TIMER repeatedly to activate or deactivate the alarm. » appears when the timer is activated. Tip • If CD/USB/iPod source is selected, but no disc is inser ted or no USB/iPod/iPhone connected, the unit switches to the tuner source automatically. Set the sleep timer Note • Make sure that you have set the clock correctly. When the unit is turned on, press SLEEP repeatedly to select the sleep timer period (in minutes). » When sleep timer is activated, is displayed. Tip • To deactivate the sleep timer, press SLEEP repeatedly until [OFF] (off) is displayed. Play from an external device You can also listen to an external audio device through this unit. 1 Connect an MP3 link cable (not supplied) to: • the MP3-LINK socket on the unit. • the headphone socket on an external device. 2 Press MP3 LINK to select the MP3 link source. 3 Play audio on the external device (see the device's user manual). English EN 13 Listen through the headphone Plug a headphone i...