Login:
Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Anleitung Philips, modell DCM2020/12

Hersteller: Philips
Dateigröße: 1.07 mb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


Never discard batteries in fire. To insert the remote control battery: 1 Open the battery compartment. 2 Insert 2 AAA batteries with correct polarity (+/-) as indicated. 3 Close the battery compartment. EN Note ••If you are not going to use the remote control for a long time, remove the batteries. ••Do not use old and new or different types of batteries in combination. ••Batteries contain chemical substances, so they should be disposed of properly. Demonstrate the unit’s features 1 In the standby mode, press until “DEMO ON” is displayed. »»This system’s features are displayed one by one. • To turn off the demonstration, press again. Connect FM aerial Tip ••For optimal reception, fully extend and adjust the position of the antenna. ••For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL socket. ••The unit does not support MW radio reception. 1 Connect the supplied FM antenna to the FM AERIAL socket on the main unit. Set clock 1 In standby mode, press PROG/CLOCK SET for 3 seconds to activate clock setting mode. »»[CLOCK SET] scrolls on the display, then the time format [24H] and [12H] appears. 2 Press / to select 24H or 12H, then press PROG/CLOCK SET to confirm. »»The hour digits begin to blink. 3 Press / to set hour, then press PROG/CLOCK SET again. »»The minute digits begin to blink. 4 Press / to set minute. 5 Press PROG/CLOCK SET to confirm the clock setting. abc FM EN Note ••To exit clock setting mode without storing, press . ••If no button is pressed in 90 seconds, the system exits clock setting mode automatically. Turn on 1 Press . »»The unit switches to the last selected source. Switch to standby mode 1 Press for over 3 seconds to switch the unit to Eco Power Standby mode. »»The backlight on the display panel turns off. To switch the unit to standby mode: 1 In Eco Power Standby mode, press for over 3 seconds. »»The clock (if set) appears on the display panel. Store radio stations automatically If no radio stations are stored, the unit can store radio stations automatically. 1 Turn on the unit. 2 Press FM. »»[AUTO INSTALL -- PRESS PLAY -- STOP CANCEL] (press to start automatic installation, or press to cancel) is displayed. 3 Press . »»The unit automatically stores radio stations with sufficient signal strength. »»After all available radio stations are stored, the first stored radio station is broadcast automatically. 4 Play Basic play operations You can control play through following operations. Key Function / To select a track or file. Press and hold to fast-forward/ fast-reverse the track during playback, then release to resume play. To pause/resume play during playback. DISPLAY To select different play information. REPEAT/ SHUFFLE To select a repeat play mode: [REP] (repeat): play current track repeatedly. [REP ALL] (repeat all): play all tracks repeatedly. [SHUF](shuffle): play tracks randomly. Press repeatedly to return to normal play. Note ••You can also use numeric keys to select a track. If you want to select a track number larger than 10, press the first number, and then press the second number within 3 seconds. For example, if you want to select track 15, press the numeric key “1”, and then press “5” within 3 seconds. EN Play from disc 1 Press CD to select the CD source. 2 Press OPEN/CLOSE. »»The disc compartment opens. 3 Place a disc with the printed side facing up, then press . 4 Play starts automatically. • If play does not start, press / to select a track, then press . Play from USB Ensure that the USB device contains playable audio contents for supported formats. 1 Insert the USB device into the USB socket. 2 Press USB to select the USB source. »»Play starts automatically. If not, press PRESET/ALBUM to select a folder and / to select a file. Then press OK to start play. Adjust sound During play, you can adjust volume through following operations. Key Function VOL +/- To increase/decrease the volume. To mute/restore sound. DBB To turn on or off dynamic bass enhancement. If DBB is activated, [DBB] is displayed. DSC To select your desired sound effect: [POP] (pop) [JAZZ] (jazz) [ROCK] (rock) [FLAT] (flat) [CLASSIC] (classic) EN 5 Play iPod/ iPhone/iPad This system is equipped with a dock for iPod/ iPhone/iPad. You can enjoy audio from the docked system through the powerful speakers. iPod/iPhone/iPad compatible The unit supports these iPod, iPhone and iPad models: Made for: • iPod touch (1st, 2nd, 3rd, and 4th generation) • iPod classic • iPod with video • iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) • iPod with color display • iPod mini • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone • iPad 2 • iPad Note ••iPod with color display, iPod classic, and iPod with video are not compatible with dock charging. Load the iPod/iPhone/iPad 1 Push the lock key to open the lid of the dock. 2 Load the iPod/iPhone/iPad onto the dock. Listen to the iPod/iPhone/ iPad 1 Press the button DOCK on your RC. 2 Load your iPod/iPhone/iPad. 3 Play the selected track on your iPod/ iPho...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien