Login:
Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Philips, modell MCM167/12

Hersteller: Philips
Dateigröße: 834.08 kb
Dateiname:

Unterrichtssprache:en

Das Dokument wird geladen, bitte warten
Das Dokument wird geladen, bitte warten

Anleitung Zusammenfassung


• Adjust time. h Tape deck operation • Star t to record. • Star t tape play. • Fast rewind/wind the tape. • Stop the tape play or open the tape door. • Pause tape play or pause recording. / / i Tape button cover • Pull to open the tape but ton cover. j VOLUME • Adjust volume. k MP3 LINK • Audio inupt jack (3. 5mm) for an ex ternal audio device. l • Stop play or erase a program. m CLOCK • Set the clock . • View the clock . • During play, select display information. n PROG • Program tracks. • Program radio stations. • Select 12 hour or 24 hour format. o SOURCE • Select a source: disc, FM tuner, MW tuner, tape or MP3 link. p Display panel • Show current status. Overview of the remote control • • • a REP Play a track repeatedly. b REP ALL Play all tracks repeatedly. c TIMER ON/OFF Turn on or off alarm timer. // d • Skip to the previous/nex t track. e DSC • Select a preset sound setting: POP, JA ZZ, CL ASSIC or ROCK . f ALB/PRESET+/ • Skip to the previous/nex t album. • Select a preset radio station. g MUTE • Mute volume. h PROG • Program tracks. • Program radio stations. • Select 12 hour or 24 hour format. i CLOCK /DISPL AY • Set the clock . • View the clock . • During play, select display information. j Numeric keypad • Select a track from a disc directly. k VOL +/ • Adjust volume. l • Stop play or erase a program. m DBB • Turn on or off dynamic bass enhancement. n • Search within a track / disc. • Tune to a radio station. • Adjust time. o • Star t or pause play. / p TIMER • Set the alarm timer. q SHUF • Play tracks randomly. r SLEEP • Set the sleep timer. s Source selection keys (DISC, TUN, MP3 LINK, TAPE) t POWER • Turn on the unit or switch to standby mode. Connect Connect speakers Note • Inser t the stripped por tion of each speaker wire into the socket completely. • For optimal sound, use the supplied speakers only. • Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifications section of this manual. 1 For the right speaker, find the sockets on the main unit marked ‘RIGHT ’. 2 Inser t the red wire to the red (+) socket. To inser t each speaker wire: a Hold down the socket flap. b Insert the speaker wire fully. c Release the socket flap. 3 Inser t the black wire into the black (-) socket. 4 For the lef t speaker, find the sockets on the main unit marked ‘LEF T’. 5 Repeat steps 2-3. Connect power Caution • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the Micro Hi-Fi. • Before connecting the AC power cord, ensure you have completed all other connections. 1 Connect the AC power cord to the wall socket. 4 Get started Caution • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your Micro Hi-Fi. The model number and serial number are on the back of your Micro Hi-Fi. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Prepare the remote control Caution • Risk of explosion! Keep bat teries away from heat, sunshine or fire. Never discard batteries in fire. To replace the remote control battery: 1 Open the batter y compar tment. 2 Inser t 2 A A A batteries with correct polarity (+/-) as indicated. 3 Close the batter y compar tment. 312 Note • If you are not going to use the remote control for a long time, remove the batter y. Auto install radio stations When you connect power and no radio stations are stored, the Micro Hi-Fi automatically begins to store radio stations. 1 Connect the Micro Hi-Fi to the power supply. » [AUTO INSTALL - PRESS PLAY] (auto install - press the PLAY button) is displayed. 2 Press on the main unit to star t installation. » [AUTO] (auto) is displayed. » The Micro Hi-Fi automatically stores radio stations with sufficient signal strength. » When all the available radio stations are stored, the first preset radio station is broadcast automatically. Set clock 1 Press and hold CLOCK /DIS PL AY to activate the clock setting mode. » The 12 hour or 24 hour format is displayed. 2 Press PROG repeatedly to select 12 hour or 24 hour format. 3 Press CLOCK /DISPL AY to confirm. » The hour digits are displayed and begin to blink. 4 Press to set the hour. 5 Press CLOCK /DISPL AY to confirm. » The minute digits are displayed and begin to blink. 6 Press to set the minute. 7 Press CLOCK /DISPL AY to confirm. Tip / / • To view the clock during play, press CLOCK /DISPL AY repeatedly until the clock is displayed. Turn on Press POWER . » The Micro Hi-Fi switches to the last selected source. Switch to standby 1 Press POWER to switch the Micro Hi-Fi to standby mode. » The backlight on the display panel is reduced. » The clock (if set) appears on the display panel. 5 Play Play disc 1 Press DISC to select the disc source. 2 Lift the lid of the CD compar tment. 3 Inser t a disc with the printed ...

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien