Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
repeats the entire disc/ programme REP ................... plays the current track continuously REP ALB ........... repeats all tracks in the current (for MP3/WMA only) album 1 To select your play mode, press MODE on the set or press REP, REP ALL or SHUF on the remote control before or during playback until the display shows the desired function. 2 Press 2; to star t playback if in the STOP position. . If you have selected SHUFFLE, playback star ts automatically. 3 To return to normal playback, press MODE on the system or press REP, REP ALL or SHUF on the remote control until the various SHUFFLE/ REPEAT modes are no longer displayed. . You can also press 9 to cancel your play mode. Note: –The SHUFFLE and REPEAT functions cannot be used simultaneously. Programming track numbers Programme in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 40 tracks can be stored in the memory. 1 In the stop position, use the TUNING 4 . (on the remote control . / ™) to select your desired track number. . For MP3/WMA, you may press ALBUM/ PRESET+/- to select a desired album, then press TUNING 4 . (on the remote control . / ™) to select your desired track. 2 Press PROG. to store. . Display: PROG flashes, and -- PR 01 is displayed briefly, then the selected track number (and the selected album number for MP3). 3 Repeat steps 1-2 to select and store all desired tracks. 4 To star t playback of your disc programme, press 2;. Reviewing the programme . Stop playback and press PROG repeatedly. . To exit review mode, pressC. Erasing the programme You can erase the programme by: . pressing 9 once in the STOP mode; . pressing 9 twice during playback; . opening the CD compar tment; . PROG disappear s from the display. 14 Radio Reception MICRO SYSTEM MCM149 SOURCE DBB STANDBY-ON VOL VOL TUNINGCD/CD-R/CD-RW COMPATIBLEiR ALBUM/PRESET MODE PROG Tuning to radio stations 1 Press SOURCE on the set repeatedly or press TUN on the remote control repeatedly until the desired waveband (FM or MW) is displayed. 2 Press down on TUNING 4 . (a / a on the remote control) and release the button. . The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning: SEARCH. 3 Repeat step 2 if necessary until you find the desired station. . To tune to a weak station, press TUNING 4 . (a / a on the remote control) briefly and repeatedly until you have found optimal reception. Programming radio stations You can store up to a total of 40 radio stations in the memory. Automatic programming Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden.The system will only programme stations which are not in the memory already. 1 Press ALBUM/PRESET + +++++/- -----to select the preset number where programming should start. Note: – If no preset number is selected, default is preset (1) and all your presets will be overridden. 2 Press PROG. for more than 2 seconds to activate programming. . AUTO is displayed and available stations are programmed in order of waveband reception strength.The first preset automatically stored will then be played. Manual programming 1 Tune to your desired station (see Tuning to radio stations). 2 Press PROG. to activate programming. . PROG flashes in the display. 3 Press ALBUM/PRESET + +++++/- -----to allocate a number from 1 to 40 to this station. 4 Press PROG again to confirm the setting. . PROG disappears, the preset number and the frequency of the preset station are shown. 5 Repeat the above four steps to store other stations. . You can override a preset station by storing another frequency in its place. Tuning to preset radio stations . Press ALBUM/PRESET + +++++/- -----until the desired preset station is displayed. English 15 Tape Operation / Recording English PULL TO OPEN Tape playback 1 Select TAPE source. . Display: shows TAPEthroughout tape operation. 2 Open the tape key flap marked “PULL TO OPEN” on the front panel. 3 Press STOP•OPENC0 to open the tape door. 4 Inser t a recorded tape and close the tape door. . Load the tape with the open side downward and the full spool to the left. 5 Press PLAY 2 to star t playback. . The key is automatically released at the end of a tape, except if PAUSE; has been activated. 6 To pause, press PAUSE;. Press again to resume. 7 By pressing a or a on the system fast winding of tape is possible in both directions. 8 To stop the tape, press STOP•OPENC0. Note: – The source cannot be changed while playing or recording a tape. General information on recording . Recording is permissible insofar as copyright or other rights of third par ties are not infringed. . For recording, use only NORMAL (IEC type I) tapes on which the tabs have not yet been broken. This deck is not suited for recording on METAL (IEC IV) type tapes. . The best recording level is set automatically. Altering the VOLUME or DBB ...