Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
– Then select the desired function (for example EA, a, a). Controls 13 English 14 English Basic Functions Important! Before you operate the system, complete the preparation procedures. Switching the system on . Press STANDBY-ON/ECO POWER B (or B on the remote). . The system will switch to the last selected source. . Press SOURCE on the top of the system or CD, USB, FM or AUX on the remote control. . The system will switch to the selected source. Switching the system to Eco Power Standby mode . Press STANDBY-ON/ECO POWER B (or B on the remote). . The backlight for clock display is dim in standby. . The ECO POWER LED will be lighted. . To view clock time in standby mode, press and hold STANDBY-ON/ECO POWER B on the front panel for more than 3 seconds or more. . The system enters the standby mode with clock display. . The volume level (up to a maximum volume level of 12), interactive sound settings, last selected mode (ECO Power Standby or normal standby), source and tuner presets will be retained in the player's memory. Power Saving Automatic Standby As a power-saving feature, the system automatically switches to Eco Power/ Standby 15 minutes after a CD has reached the end and no control is operated. Adjusting volume and sound 1 Turn the VOLUME -/+ knob or press VOL +/- on the remote to decrease or increase the volume. . Display shows the volume level VOL and a number from MIN 01, 02, ...30 MAX. 2 Press DSC repeatedly to select the desired sound effect: POP/JAZZ/CLASSIC/ROCK/FLAT. 3 Press DBB to switch bass enhancement on or off. . DBB appears when enabled and disappears when disabled. 4 Press MUTE on the remote control to interrupt sound reproduction instantly. . Playback will continue without sound and MUTE will flash on the display. . To activate sound reproduction you can: – press MUTE again; – adjust the volume controls; – change source. English 15 3 Insert a disc with the printed side facing up. Press 0 again to close the compartment. . CLOSE is displayed followed by READ DISC as the CD player scans the contents of a disc, and then playback starts automatically (if not, press EA). Basic playback controls To play a disc . Press EA to star t playback. . The current track number and elapsed playing time of the track are displayed during disc playback. To select a different track . Press the control knob on the front panel to the left or right (corresponding to S/T) or press . / ™ on the remote once or repeatedly until the desired track number appears in the display. . You can also use the Numerical Keypad (0~9) on the remote to select a track directly. . To input a number larger than 10, press SHIFT on the remote once or more to select the first digit you want and then use the Numerical Keypad (0~9) to input the second digit. . If you have selected a track number shortly after loading a disc or in the PAUSE position, you will need to press EA to star t playback. Text display during playback In CD mode . Press DISPLAY on the remote control repeatedly to see the following information. . Track number and elapsed playback time of current track. . Track number and remaining playback time of current track. . Track number and total remaining playback time. In MP3-CD mode . Press DISPLAY on the remote control to display the ID-3 information if available. Important! The lens of the CD player should never be touched. Loading a disc This CD player plays Audio Discs including CD Recordables, CD-Rewritables and MP3 CD. . CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible. 1 Press SOURCE on the top of the system to select CD or press CD on the remote. 2 Press 0 to open the CD compartment. . OPEN is displayed when the compartment cover slides up. CD/MP3-CD Operation CD/MP3-CD Operation English To find a passage within a track 1 Press and hold the control knob on the front panel to the left or right (corresponding to S/T) or press 5 /6 on the remote. 2 When you recognize the passage you want, release the control knob (5 /6 on the remote). . Normal playback continues. To stop playback . Press 9. To interrupt playback . Press EA during playback. . The display freezes and the elapsed playing time flashes when playback is interrupted. . To resume, press EA again. Notes: CD play will also stop when; – the CD door is opened. – the disc has reached the end. – you select another source: FM, USB or AUX. – you select standby. – the set auto off time arrives. To scan all tracks in a disc . Press INTRO on the remote to play the first 10 seconds of each track in the whole disc one by one. . INTRO appears on the display. . The playback will star t from the first track of the current disc. To stop scanning . Press INTRO on the remote again until INTRO disappears. Playing an MP3 disc 1 Load an MP3 disc. . The disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc. 2 Press ALBUM +/-on the remote to select a desired album. 3 Press the control knob on the front panel to the left o...