Stimmen - 1, Durchschnittliche Bewertung: 5 ( )

Hersteller: Philips Dateigröße: 1.62 mb Dateiname: Unterrichtssprache:

. It is not possible to listen to another source. . It is not possible to activate the timer function. Synchro start CD recording 1 Select CD source. . Press S or T (. or ™) to select the desired track to star t recording. . You can programme the tracks in the order you want them to be recorded (refer to “CD/MP3CD Operations - Programming the disc tracks”). 2 Press RECORD to star t recording. . Playing of the CD programme star ts automatically from the beginning of the CD. It is not necessar y to star t the CD player separately. One touch recording 1 Select CD, TUNER or AUX source. 2 If necessar y, star t playback of the selected source. 3 Press RECORD to star t recording. Recording timer To record from the radio, you will need to use a preset radio station and to set a star t (ON) and finish (OFF) time. 1 Select the preset radio station to record from (refer to “Radio Reception - Tuning to preset radio stations”). 2 In standby mode, press PRESET 3 for more than two seconds. . The current selected source is displayed. 3 Press SOURCE repeatedly until “REC TUN” source is displayed. 4 Press PRESET 3 to confirm the source. . “SET ON TIME” is displayed and the clock digits for the hours flash. 5 Adjust VOLUME on the front pannel to set the hours. 6 Press PRESET 3 again. . The clock digits for the minutes flash. 7 Adjust VOLUME on the front pannel to set the minutes. 8 Press PRESET 3 to confirm the recording star t time. . “SET OFF TIME” is displayed and the clock digits for the hours flash. 9 Repeat steps 5-7 to set the finish time. 0 Press PRESET 3 to confirm the timer settings. . is shown and the recording timer is now set. Note: – The recording timer will not be activated if the system is in tape play mode. 17 Clock/Timer English Clock setting There are two possible methods for setting the clock: manually or automatically by using RDS. Automatic clock setting Refer to “Setting the RDS clock”. Manual clock setting 1 In standby mode, press and hold CLOCK SET/RDS. . The clock digits for the hours flash. 2 Adjust VOLUME to set the hours. 3 Press CLOCK SET/RDS again. . The clock digits for the minutes flash. 4 Adjust VOLUME to set the minutes. 5 Press CLOCK SET/RDS to confirm the time. Timer setting . The system can be used as an alarm clock, whereby the CD,TUNER or TAPE is switched on at a set time (one time operation). The clock time needs to be set first before the timer can be used. . You can also use it to record a favourite tuner programme at a set period (refer to “Recording timer”) . During setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. 1 In standby mode, press PRESET 3 for more than two seconds. 2 Press SOURCE repeatedly to select the sound source. . “SET TIME” and “SELECT SOURCE” are displayed. 3 Press PRESET 3 to confirm your desired mode. . “SET ON TIME” is displayed and the clock digits for the hours flash. 4 Adjust VOLUME to set the hours. 5 Press PRESET 3 again. . The clock digits for the minutes flash. 6 Adjust VOLUME to set the minutes. 7 Press PRESET 3 to confirm the time. . The timer is now set and activated. Activating and deactivating timer . In standby or during playback, press TIMER once on the remote control. . Display shows if activated, and disappears if deactivated. Sleep timer setting The sleep timer enables the system to switch off by itself after a set period of time. 1 Press SLEEP on the remote control repeatedly to select a preset time. . The selections are as follows (time in minutes): 60 6060606060™ 45 4545454545™ 30 3030303030™ 15 1515151515™ 0 00000™ 60 6060606060 … . "SLEEP XX" or "0" is displayed. "XX" is the time in minutes. 2 When you reach the desired length of time, stop pressing the SLEEP button. To deactivate the sleep timer . Press SLEEP repeatedly until "0" is displayed, or press the STANDBY ON button. 18 Specifications AMPLIFIER Output power ....................................... 2 x 15 W RMS ............................................................ 30 W + 30 W MPO Signal-to-noise ratio .......................... . 62 dBA (IEC) Frequency response ......... 40 – 15000 Hz, ± 3 dB Impedance loudspeakers ......................................... 4 . Impedance headphones .................... 32 . -1000 . CD/MP3-CD PLAYER Number of programmable tracks ......................... 20 Frequency range .................................. 20 – 20000 Hz Signal-to-noise ratio ............................................ 75 dBA Channel separation .......................... . 60 dB (1 kHz) Total harmonic distor tion ........................... < 0.003% MPEG 1 Layer 3 (MP3-CD) .......... MPEG AUDIO MP3-CD bit rate ....................................... 32-256 kbps (128 kbps advised) Sampling frequencies ....................... 32, 44.1, 48 kHz TUNER FM wave range ................................... 87.5 – 108 MHz LW wave range ..................................... 153 – 279 kHz MW wave range ...................................

Herunterladen

Geben Sie zwei Ziffern: