Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
DISPLAY FLIP DISPLAY FLIP a b c d e f s r q p o n m l k ji h g FM b MIC VOL • Adjust volume of the connected microphone(s). c DISPLAY FLIP p CROSS FADER ASSIGN • Reverse the text displayed on the screen. d VOL • Adjust headphone volume. e • Connect a headphone for monitoring. f OUTPUT A/B • Switch headphone output between audio source A and B. g (A/B) • Connect a USB mass storage device. h Play control keys / • Skip to the previous/next track. ALBUM/PRESET /TUNING (A) • Select a preset radio station. • During USB play, skip to the previous/ next album. ALBUM +/- (B) • During USB play, skip to the previous/ next album. • Star t or pause play. i Display panel • Show current status. j Volume knob • Adjust speaker volume. k MAX SOUND • Turn on/off instant power boost. l DBB • Turn on/off dynamic bass enhancement. m • Turn on the unit or switch to standby mode. n DSC • Select a preset sound setting. o FM • Select the tuner source. • swap play between audio source A and B. q MP3 LINK(A/B) • Connect an external audio device. r Dock for iPod/iPhone(A/B) s Source selection keys (A/B) • Select a source: iPod/iPhone, USB or MP3 LINK. Overview of the remote control cfhgedabponimjklMODE EN a • Turn on the unit or switch to standby mode. b LIGHT • Adjust the decoration light around the speakers. c SOURCE A/B • Select a source (A/B): iPod/Phone, USB or MP3-LINK. d OK/ • Star t or pause play. • confirm a selection. • In dock mode, navigate in the iPod/ iPhone menu. e • : in tuner mode, tune to a radio station. • : during USB play, skip to the previous/next album. f FM • Select the tuner source. g MENU/ • Stop play. • (Press and hold) access the iPod/ iPhone menu. • Stop radio programming. h / • Skip to the previous/next track. • Search within a track. • Select a preset radio station. i VOL +/ • Adjust speaker volume. j Numeric keypad (0 to 9) • In USB mode, select a track directly. • In tuner mode, select a preset radio station directly. k MODE • Select repeat/shuffle play modes. l DBB • Turn on/off dynamic bass enhancement. m DSC • Select a preset sound setting. n MAX SOUND • Turn on/off instant power boost. o PROG • Program radio stations. p • Mute or restore sound output. EN 10 EN 3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Prepare the remote control 1 Press and push the battery compartment to slide it open (see "1" in the illustration). 2 Insert two AAA batteries with correct polarity (+/-) as indicated. 3 Push and slide back the battery compartment (see "3" in the illustration). Note •• The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. •• If you are not going to use the remote control for a long time, remove the batteries. •• Do not mix batteries (old and new or carbon and alkaline, etc.). •• Batteries contain chemical substances, so they should be disposed of properly. Connect power Caution •• Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the head of the AC power cord. •• Risk of electric shock! When you unplug the power cord, always pull the plug from the socket. Never pull the cord. Note •• Before you connect the AC power cord, make sure that you have completed all the other connections. • Connect the AC power cord to • the ~ AC IN socket on this unit. • the wall power socket. Turn on 1 Turn thePOWER ON/OFF switch on the back panel to the | position. 2 Press . » The unit switches to the last selected source. Switch to standby mode • Press to switch the unit to standby mode. » The backlight on the display panel turns off. EN 4 Play Basic play operations You can control play through the following operations. Function Action To stop play press MENU/ . Compatible iPod/iPhone The unit suppor ts the following iPod/iPhone models. Made for. • iPod touch (1st, 2nd, 3rd, and 4th generation) • iPod classic • iPod nano (2nd, 3rd, 4th, 5th, and 6th generation) • iPhone 4S • iPhone 4 • iPhone 3GS . To pause/ press resume play To skip to a track press / . To search press and hold / , then during play release to resume normal play. To swap play between audio source A and B • Press SOURCE A or SOURCE Brepeatedly. • * On the top panel, move the channel fader to the left (A) or right (B) to fade in and fade out. * When you use the channel fader to swap play between source A and B, the music play will not be interrupted. For example, when you move the channel fader from the left to the right, the song played from source A will gradually reduce to silence (fade-out), while at the same time, the song ...