Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Press EA on the main unit to store all available radio stations (page 3 - P3) or press C to exit (refer to “Tuner Operations”). English 11 Connections English Step 5: Inserting batteries into the remote control 132 1 Open the batter y compar tment cover. 2 Inser t two batteries type R06 or AA, following the indications (+ /-) inside the compar tment. 3 Close the cover. Using the remote control to operate the system 1 Aim the remote control directly at the remote sensor (iR) on the main unit. 2 Select the source you wish to control by pressing one of the source select keys on the remote control (for example CD,TUNER). 3 Then select the desired function (for example EA, i , e ). CAUTION! – Remove batteries if they are exhausted or will not be used for a long time. – Do not use old and new or different types of batteries in combination. – Batteries contain chemical substances, so they should be disposed of properly. 12 Gameport Operations About Gameport Gamepor t allows you to connect your game console to this audio system which enables you to enjoy a total game immersion experience through powerful sound output. Preparation before use Rear panel Front panel 23Game console OUT OUT 8 1 Connect your game console’s video and audio output to the GAMEPORT video and audio inputs respectively (refer to “Connections Connecting to game console). 2 Connect your TV’s video input to the VIDEO OUT (CVBS) on the rear panel. 3 Connect all the AC power cord to the power outlet. Starting operation 4 Turn on the TV and set to the correct video-in channel. The TV’s video input channel may be called AUX(iliar y) IN, AUDIO/VIDEO (A/V) IN, EXT 1, etc. These channels are often near channel 00 on your TV. Or, your TV remote control may have a button or switch that chooses different video modes. See your TV manual for details. 5 Press AUX•GAME until “GAMEPORT” is display. 6 Press GAME to select the type of sound setting that best suit the game : SPEED, PUNCH, BLAST or OFF. 7 If you like to mix your game sound to your favourite music, press MIX-IT to select the desired music source : CD, TUNER, AUX, TAPE or OFF. CD ™ “MIX-CD" TUNER ™ “MIX-TU" AUX ™ “MIX-AUX" TAPE ™ “MIX-TA1" / “MIX-TA2" OFF ™ “MIX-OFF" Note: –To change the disc tray, you have to press CD, then press CD 1~3 to select the desired disc tray. 8 If necessar y, star t playback of your chosen mixer source. 9 Star t playing your favourite game. To adjust the game console’s volume level . Adjust GAME VOLUME. Notes: –You can only activate GAME VOLUME and MIXIT while in the game source mode. – If your game console is switched on, the video image will always appear on the TV even though you are not in the gameport mode. English 13 Basic Operations English Switching on/off Switching to active mode . Press CD, TUNER, TAPE or AUX/GAME. Switching to Eco Power standby mode . Press B. . ECO POWER button lights up. . The display screen will go blank. Switching to standby mode (view clock) . Press and hold B. . The clock is displayed. . While in the standby mode, pressing CLOCK•TIMER button will switch the system to the Eco Power standby mode. Note: – Before switching the system to the Eco Power standby or standby mode, make sure the demonstration mode has been deactivated. Demonstration mode If the demonstration mode is active, whenever you switch the system to the standby mode, it will begin showing various features offered by the system. To activate the demonstration In the standby mode, press and hold C on the main unit until “DEMO ON" is displayed. To deactivate the demonstration . Press and hold C on the main unit until "DEMO OFF" is displayed. Setting the clock 4 23 1 25 1Press and hold CLK/TIMER (or CLOCK•TIMER on main unit) until “SELECT CLOCK OR TIMER” is displayed. 2Press + (or e on the remote control) to change the display to “CLOCK” and press CLK/ TIMER (CLOCK•TIMER) again to confirm. 3Press 4 or . (or 1 / . on the remote control) repeatedly to set the hour. 4Press – or + (or i/e on the remote control) repeatedly to set the minute. 5Press CLK/TIMER (CLOCK•TIMER) to store the setting. . The clock will star t working. To view the clock time in any active mode . Press CLK/TIMER (CLOCK•TIMER) once. . The clock is displayed for a few seconds. Notes: – The clock setting will be erased when the system is disconnected from the power supply. – The system will exit clock setting mode if no button is pressed within 90 seconds. –To set the clock automatically through the time information in the RDS signal, refer to “Tuner Operations - Setting the RDS clock”. 14 Basic Operations Dimming the system’s display You can select the desired brightness for the display panel. . In any active mode, press DIM on the remote control repeatedly to turn on / off dim mode. . DIM is shown, except for DIM OFF mode. Volume control . Adjust MASTER VOLUME (or press VOL +/-on the remote) to increase or decrease the sound level. . “VOL MIN” is the minimum volume level and ”VOL MAX” is the maximum volume level. ...