Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Kenwood
Dateigröße: 749.8 kb
Dateiname:
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
-WMA Professional -WMA Lossless -WMA Voice AAC fi les File format: MPEG-4 AAC (created in iTunes™ 4.1 to 7.3) Extension: .m4a Sampling frequency: 16 kHz/ 22.05 kHz/ 24 kHz/ 32 kHz/ 44.1 kHz/ 48 kHz Bit rate: 32 kbps – 320 kbps • Files encoded using Apple’s Lossless Encoder cannot be played. Disc formats ISO 9660 Level 1 ISO 9660 Level 2 Joliet Romeo File number limitations on discs Max. fi les/folders: 512 in total Max. folders: 255 Files per folder: 255 Maximum number of displayable characters File names: 64 (including fi le extension) Folder names: 64 Tag display (Title/Album/Artist) ID3 v1.0/ 1.1: 30 ID3 v2.2/ 2.3/ 2.4: 128 • This system is capable of displaying alphanumeric characters. Other character types are displayed as asterisks (*). Other notes • Note that even where audio files comply with the above standards, playback may fail due to factors such as the disc characteristics or recording conditions. • Playback may also fail depending on the specifi cations of the encoding software or the settings used for encoding. • DRM (Digital Rights Management) files cannot be played. • Audio files encoded using VBR (Variable Bit Rate) may use bit rates that fall outside the supported range. Audio files with bit rates outside the supported range cannot be played. • Apple and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. • Windows Media is a trademark of Microsoft Corporation registered in the U.S. and other countries. 10 DP-K1000 Important Information Important Information Handling Discs Cautions on CD discs Handling precautions Hold a CD taking care not to touch the played surface. (The side without the printed label is the playback side.) Discs playable on the system This system can play back a CD (12 cm, 8 cm), CD-ROM, CD-R, CD-RW or the audio part of a CD-EXTRA disc. Notes on CD-ROM/CD-R/CD-RW discs If the CD-ROM, CD-R or CD-RW disc in use has a printable label surface, the disc may be unable to be taken out of the system due to sticking of the label surface. To prevent malfunction of the system, do not use such a disc. Notes on installing the system Always use a disc carrying the marking. A disc without this marking may be unable to be played back correctly. The disc rotates at a high speed during playback. Never use a cracked, chipped or greatly warped disc. Otherwise, damage or malfunction of the player may result. Also, do not use a disc with a non-circular shape as this may result in malfunction. • Always install the system on a flat, stable surface. When installing the system on a stand of some sort, be sure to check the strength of the stand. CAUTION Observe the following cautions when installing the system. Insufficient heat radiation may build up internal heat and cause a malfunction or fire hazard. ..Leave the spaces specified below around the cabinets of the main unit. Back panel: 10 cm or more Install the system so that the power outlet is easily accessible from the user, and unplug the power cord from the power outlet immediately in case of a trouble. Note that the power supply to the system is not shut down completely by simply setting the power key to OFF. To shut down the power supply completely, it is required to unplug the power cord. Notes on transporting or moving the system Before transporting or moving this system, take the following actions: 1 Remove any CDs from the unit. 2 Press the [E] key and check that the “NO DISC” message is displayed. 3 Wait a few seconds and then turn the system off . 4 If there are any other components connected to the system, check that they are all turned off before disconnecting the cables. English 11 Connecting the System Ensure that all the cords are securely connected. Loose or incomplete connections may Connections result in noise interference or no sound at all. Caution for connection Do not plug the AC power cord into an AC wall outlet until all the connections are completed. Before disconnecting any cords or cables, always turn the main unit off and unplug the power cord from AC wall outlet. To AC wall outlet AC power cord Insert the plug fi rmly all the way into the AC wall outlet. .. To optical digital input (PCM signals) Coaxial cable To CD IN (COAX) To SYSTEM CONTROL System control cable To analog audio input 12 A B MD recorder, etc. Amplifi er (other than R-K1000) R-K1000 To AC wall outlet 12 DP-K1000 Connecting the System Connecting the R-K1000 (sold separately) DIGITAL OUT (COAXIAL) 1 To connect an R-K1000 (sold separately) to the DP-K1000, use the coaxial cable supplied with the DP-K1000 to connect the [CD IN (COAX)] terminal on the R-K1000 to the [DIGITAL OUT (COAXIAL)] terminal on the rear panel of the DP-K1000. SYSTEM CONTROL 2 To connect an R-K1000 (sold separately) to the DP-K1000, use the system control cable supplied with the DP-K1000 to connect the [SYSTEM CONTROL] terminal on the R-K1000 to the [SYSTEM CONTROL] terminal on the rear panel of the DP-K1000. Connecting Other Components DIGITAL OUT (...