Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Dolby Pro Logic50 and Dolby 3 Stereo can be used when playing video, DVD, or LD software bearing the DIGITAL mark. DSP modes can be used with any source except Dolby Digital and DTS. Preparations OTurn ON related components. OComplete "Setup for surround play". . OSet the INPUT SELECTOR to the component you wish to play back with surround sound. OUse the INPUT MODE key to select the input mode (analog or digital) for the source you wish to play back. * Sound may not be reproduced when the input signal and Listen mode are selected improperly. How to select the digital input, analog input and LISTEN MODE. E Surround play (LISTEN MODE) 1 1 Play video or music software. 2 2 Select the LISTEN MODE. LISTEN MODE ATo select a Listen mode: BTo select the DSP mode: Main unit DTSDIGITAL CIRCLE SURROUND listenmode (Select the icon) (Select the icon) GRC O The listening mode settings are stored separately for each input. If the input mode is set to digital auto ("AUTO SOUND" lights), the receiver selects the optimal listening mode automatically based on the type of input signal and the speaker settings. O Note that the only listening mode settings that can be used for playback with the current input signal type and speaker settings are available. When a Listen mode is selected: O Select the Listen mode according to the software to be played. Main unit Display Listen mode DTS DOLBY DIGITAL CIRCLE SURROUND Each press of the LISTEN MODE key switches the mode as follows. 1 PRO LOGIC : Dolby Pro Logic 2 3 STEREO : Dolby 3 Stereo 3 CS CINEMA (Circle surround) : 4 CS MUSIC (Circle surround) : 5 ARENA (DSP) : A lively feeling as felt in the frontmost seat in a concert arena. 6 THEATER (DSP) : A lively sound field like in a theater. 7 JAZZ CLUB (DSP) : Sound field of a jazz live house where cymbals sound sharply. 8 STEREO : O 2 cannot be selected when “C” has been set to Off in the Setup operation. O 1, 3 and 4 cannot be selected when “LS/RS” has been set to Off in the Setup operation. O The LISTEN MODE key is not accepted during headphone listening. O Switching is not possible when the DVD 6ch INPUT is used. O Noise will be produced when a DTS source is played by selecting the analog input. O When playback is started, the sound may be cut or interrupted before the input source is confirmed as Dolby Digital. O If a Dolby Digital signal having more channels than the maximum number of playback channels available using the receiver’s current settings is input, the DOWNMIX indicator lights on the display and downmixing is performed to match the number of available channels. Example : If a Dolby Digital 5.1 signal is being input and the receiver is set to the stereo mode or if the center speaker channel is turned off. Continued to next page cTo select the Circle surround mode: (Select the icon) 1Select the Circle surround type. or (Select the icon) GRC cTo select the Circle surround mode: (Select the icon) 1Select the Circle surround type. or (Select the icon) GRC LISTEN MODE To end surround play Main unit GRC (Select the icon) 1 Select the “Stereo” icon. Ambience effects To select the DSP mode (DSP) 1 1 Select the DSP surround mode. O This can be selected when the input signal is other than DTS, Dolby Digital (AC-3). 1 Select DSP. GRC listenmode (Select the icon) 2 Select the “Arena” “Theater” “Jazz Club”. (Select the icon) 2 2 Select the adjustment parameter. Main unit Each press LISTEN MODE key switches the indication. 1 PRO LOGIC 2 3 STEREO 3 CS CINEMA 4 CS MUSIC 5 ARENA 6 THEATER 7 JAZZ CLUB 8 STEREO O 2 cannot be selected when “C” has been set to Off in the Setup operation. O 1, 3 and 4 cannot be selected when “LS/RS” has been set to Off in the Setup operation. O The LISTEN MODE key is not accepted during headphone listening. O The effects of adjustments are applied equally to sound fields 5 to 7. O Switching is not possible when the DVD 6ch INPUT is used. . 2EFFECT LEVEL Adjust with keys and . 1 Display the setup screen. GRC 1WALL TYPE Select “Soft”, “Medium” or “Hard”. O The EFFECT level can be adjusted between 1 and 3. To decrease To increase Ambience effects Listen mode selection 53 Surround play of digital input INPUT selector DVD (COAXIAL), CD (OPTICAL) Input signal DTS Dolby digital *1 PCM *1 Listen mode 1 DTS 2 STEREO 1 DOLBY DIGITAL 2 PRO LOGIC 3 3 STEREO 4 STEREO 1 PRO LOGIC 2 3 STEREO 3 CS CINEMA 4 CS MUSIC 5 ARENA (DSP) 6 THEATER (DSP) 7 JAZZ CLUB (DSP) 8 STEREO Surround play of analog input INPUT selector DVD 6ch INPUT MD/TAPE1, VIDEO1, 2, CD, TUNER Input signal Analog Analog *1 Listen mode The switching is not available when the DVD 6ch INPUT is selected. . 1 PRO LOGIC 2 3 STEREO 3 CS CINEMA 4 CS MUSIC 5 ARENA (DSP) 6 THEATER (DSP) 7 JAZZ CLUB (DSP) 8 STEREO O *1: The possible selections may be limited depending on the played source and speaker setting. Checking the current status (Status) (Remote control only) 1 Select the “listen mode” icon. GRC listenmode (Select the icon) 2 Select the “Status” icon. (Select th...