Login:
Stimmen - 5, Durchschnittliche Bewertung: 3.2 ( )

Anleitung Kenwood, modell XD-8551

Hersteller: Kenwood
Dateigröße: 2.13 mb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


1 1 Press so that the “PGM” indicator goes off. Should be OFF. P.MODE PGM If your system includes the DP-H5, skip to step 3 below. 2 2 Select the disc. (DP-MH5 only) Selected disc No. DISC SKIP D1 )1 )):2 Go to step 3 before playback starts. 3 3 Start edit recording. During recording: X-H5 Blinks Lights Application O p . CCRS CCRS REC / ARM OThe recording level and bias will be adjusted automatically in approx. 60 seconds (variable depending on CD contents), after which recording starts. OThe CD tracks are recorded in the order they are recorded on the CD. OThe tape and CD stop automatically when recording has completed. NotesNotes 1. When the CCRS key is pressed during playback of CD, the playback stops and the CCRS setting (preparing edited recording) starts. 2. Edit recording is not possible with CDs containing a track that is longer than one tape side, which may occur with classical music, etc. 3. If the deck is set for one-side recording (O), the processing at the tape end is applied only on side A. 4. When the last tune of tape side B is faded out, the ending part of the last but one tune may sometimes be faded out if the space between it and the last tune is short. 58 Convenient CD recording For the systems including the DP-MH5 58 Convenient CD recording For the systems including the DP-MH5 XD SERIES (En/E2) Twin recording (For the systems including DP-MH5) This function allows to record CD sound simultaneously on a tape and MD. All tracks on a CD can be recorded in the same order as they are recorded on the CD. When recording sound from the MD recorder to a cassette deck, be sure to read the instruction manual of the optional MD recorder (DM-F70). Recording preparations are required. ¤ UUUUU For the reverse mode, select “O” ,“[”(two-way recording). 1 1 Press so that the “PGM” indicator goes off. Should be OFF. P.MODE PGM OThe recording input of the MD recorder is set automatically to “DIGITAL”. 2 2 Select the disc. Selected disc No. DISC SKIP D1 )1 )):2 Go to step 3 before playback starts. 3 3 Start edit recording. During recording: X-H5 Blinks Lights Application section TWIN REC CCRS REC / ARM OThe recording level and bias will be adjusted automatically in approx. 60 seconds (variable depending on CD contents), after which recording starts. OThe CD tracks are recorded in the order they are recorded on the CD. OThe tape and CD stop automatically when recording has completed. To end recording in the middle 7 O Both the cassette deck and CD player stop. NotesNotes 1. When the TWIN REC key is pressed during playback of CD, the playback stops and the CCRS setting (preparing edited recording) starts. 2. The automatic recording level setting in the edit recording is based on a suitable section for recording level setting in the loaded CD. 3. If the deck is set for one-side recording (O), the processing at the tape end is applied only on side A. 59Effective Sound Adjustment 59Effective Sound Adjustment XD SERIES (En/E2) This unit permits selection of equalizer and sound field playback. Please select the equalizer as desired according to the music genre. Select the sound field mode according to the desired atmosphere. Enjoying Sound Field Effects When playing back a tape recorded by applying the SRS 3D effect, be sure to turn off the SRS 3D system. Experiencing SRS 3D (Sound Retrieval System) The Sound Retrieval System is an epochal system which produces a three-dimensional sound space by applying the most suitable processing to the sound signal on the basis of the human listening mechanism. This permits real depth and sound location, considered as difficult to realize with conventional 2-channel stereo (general stereo). A sufficient effect can be obtained for any source (CD, tape, broadcasts, etc.). Recording with applied SRS 3D also is possible. 1Set SRS 3D to ON. Lights 2Adjust the effect strength (level). MODE TUNING UP DOWN Each press switches the modes as follows. 1SRS 3D indicator lit ............. SRS 3D STEREO ON. 2SRS 3D indicator not lit ...... SRS 3D STEREO OFF. LEVEL +1):5 Level display (1) LEVEL will be displayed. The level decreases. The level increases. (2) Adjust the strength of the effect. SRS 3D PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE AUTO TUNED DISC ALL STEREO kHz MHz MUTE 12 PROG. N.B. sRs)3D*ON:5 1 2 3 4 5 11 12 13 14 1516 17 18 19 20 6 7 8 9 10MAX SLEEP O.T.T. ECHO P.B.C. EQ. ON MANU. Each press switches the modes as follows. 1Strength of the SRS 3D effect (LEVEL) 2Spectrum analyzer display switching (DISPLAY) 3Left and right volume balance OAdjustment is possible in the range from -10 to +10. OPlease set as desired according to the titles being played back etc. OSRS 3D ON/OFF switching is not possible during recording. When equalizer or another effect is applied to the sound, the sound with the applied effect can be re- corded. (Recording and playback of the sound with sound effect are impossible with a component con- The characters scroll toward the left. Application ...

Dieses Handbuch ist für folgende Modelle:
Stereoanlage - XD-6051 (2.13 mb)
Stereoanlage - XD-6551 (2.13 mb)
Stereoanlage - XD-8001 (2.13 mb)
Stereoanlage - XD-8051 (2.13 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien