Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
The DVD/CD Receiver will now go into the PAUSE mode. 2. To return to the slide show, press PLAY or press PAUSE/STEP again. Moving to another File Press SKIP (.or >) once during viewing a picture to advance to the next or previous file. Rotating the picture Press vVbB during showing a picture to rotate the picture clockwise or counter-clockwise. JPEG disc compatibility with this player is limited as follows: • Depending upon the size and the number of JPEG files, it could take a long time for the DVD/CD Receiver to read the disc’s contents. If you don’t see an on-screen display after several minutes, some of the files may be too large — reduce the resolution of the JPEG files to less than 2M pixels as 2760 x 2048 pixels and burn another disc. • The total number of files and folders on the disc should be less than 999. • Some discs may not operate due to a different recording format or the condition of disc. • Ensure that all the selected files have the “.jpg” extensions when copying into the CD layout. • If the files have “.jpe” or “.jpeg” extensions, please rename them as “.jpg” file. • File names without “.jpg” extension will not be able to be read by this DVD/CD Receiver. Even though the files are shown as JPEG image files in Windows Explorer. Playing a DivX Movie file Using this DVD/CD Receiver you can play DivX disc. 1. Insert a disc and close the tray. The MOVIE menu appears on the TV screen. List Movie Folder 1 Movie Folder 2 Movie Folder 3 Movie Folder 4 Movie Folder 5 Movie Folder 6 Movie Folder 7 Movie Folder 8 MOVIE 0:00:00 2. Press v / V to select a folder and then press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons on the remote to highlight and press ENTER. 3. If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. 4. Press STOP to exit. Notice for displaying the Divx subtitle If the subtitle does not display properly during playback, press and hold SUBTITLE for about 3 seconds then press SUBTITLE to select another language code until the subtitle is displayed properly Tips: • Press MENU to move to the next page. • On a CD with MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE, and MUSIC, PHOTO and MOVIE word on top of the menu is highlighted. Notes: • Be sure to select “SUBTITLE ON” mode by pressing the subtitle file every time before playing a DivX file . • When the subtile has more than two languages in the file, original subtile is only available. • The DivX file does not work when the microphone is in use. • You can not adjust sound mode and VIRTUAL sound during the DivX file playing. DivX disc compatibility with this player is limited as follows: • Available resolution size of the DivX file is under 800x600 (W x H) pixel. • The file name of the DivX subtitle is available by 45 characters. • If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. • If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. • If the video and audio structure of recorded files are not interleaved, either video or audio is outputted. Playable DivX file • ".avi ", ".mpg ", ".mpeg ", ".divx" Playable Subtitle format • SubRip(*.srt/*.txt) SAMI(*.smi) SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt) VobSub(*.sub) Playable Codec format • "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "MP43 ", "3IVX ". Playable Audio format "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". • Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA) • Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA) 18 19 Operation Presetting the Radio Stations You can preset 50 stations for FM and AM (MW). Before tuning, make sure that you have turned down the volume. 1. Press BAND on the remote control until FM or AM (MW) appears in the display window. 2. And then every time you press BAND, FM and AM (MW) changes alternately. 3. Press and hold TUN.(-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when the DVD/CD Receiver tunes in a station. 4. Press PROG./MEMO. on the remote control. A preset number will flash in the display window. 5. Press PRESET (-/+) on the remote control to select the preset number you want. 6. Press PROG./MEMO. on the remote control again. The station is stored. 7. Repeat steps 3 to 6 to store other stations. To tune in a station with a weak signal Press TUN.(-/+) repeatedly in step 3 to tune in the station manually. To clear all the stored stations Press and hold PROG./MEMO. for about two seconds and “ERASE ALL” is appeared in the display window and then press PROG./MEMO. again, the stations are cleared. If you have accidentally entered into the "ERASE ALL" mode and you do not wish to clear the memory, do not press any key. After a few seconds, "ERASE ALL" will go off by itself and change to n...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - XH-TK5022KZ (1.38 mb)