Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
one or more times to indicate how long the system should SLEEP Change the remaining time by repeating Steps 1 and 2 one or more times until Sleep Timer . 1,2,3 MUTE Function o switch the sound back on (at the same volume as before), press TUNER BAND MO/ST TIMER/CLOCK TIMER ON/OFF AUX PROGRAM/SET REP. A B SLEEP EQ/S.BASS TAPE SPEED POWER SOUND DISPLAY PTYRDS MM-J5-9/15/Page You can connect a set of headphones component system so that you can programs without disturbing other people The headphones must have a 3.5 mm connector or appropriate adaptor. Connect the headphones to the Phones connector on the rear panel (or top right corner). Result: The loudspeakers are no longer used for sound output. Prolonged use of headphones at a high volume may damage your hearing. 19 18 . To obtain the best possible results from your micro-component system, you must clean the following elements regularly: The outer casing The compact disc player The cassette players (heads, rollers and drive capstans) Always unplug the system from the wall outlet: Before cleaning it If you are not going to be using it for a long time Outer Casing Clean the outer casing regularly using a soft cloth and a light detergent. Do not use abrasive powders, liquids or aerosol cleaners. Never let any liquids get into the system. Compact Disc Player Before playing a compact disc, clean it with a special CD cleaning agent. Do not use the same cleaning agents as for vinyl LP records. Carefully wipe the disc from the centre outward. Regularly clean the player with a special cleaning disc (available from your local dealer). Tape Decks Press PUSH EJECT( ) to open the cassette deck. Use a cotton bud and a special cassette cleaning agent to clean the: Head (1) Rollers (2) Drive capstans (3) If you will not be using the remote control for a long time, remove the batteries to prevent corrosion. Although your system is very hard-wearing, it should not be used in an excessively dusty environment or subjected to shocks or extreme heat (close to heating appliances or in direct sunlight, etc.). If the unit emits an unpleasant odour when in use, unplug it from the main supply and contact the after-sales service. Cleaning Your Micro-Component System 1 1 2 2 3 1 2 The following diagrams illustrate the precautions to be taken when using or moving your micro-component system. Safety Precautions Ambient operating conditions: Ambient temperature 5°C-35°C Humidity 10-75% Do not expose the unit to direct sun radiation or other heat sources. This could lead to overheating and malfunction of the unit. Do not place potted plants or vases on top of the unit. Moisture entering the unit could lead to dangerous electric shock and can cause equipment damage. In such events immediately disconnect the main plug from the socket. Do not place heavy items on the main lead. Main cable damage can lead to damage of the equipment (fire hazard) and can cause electric shock. Do not remove any equipment panels. The inside of the unit contains live components, which cause electric shock. During thunderstorms, disconnect the main plug from the socket. Main voltage peaks due to lightning could damage the unit. VOLUME UP DOWN Remove the batteries from the remote control, if not used for any extended period. Leaking batteries can cause serious damage to the remote control. When using headphones, take care not to listen at excessive volumes. Extended use of headphones at high volumes will lead to hearing damage. Check that the tape in the cassette is sufficiently taut. To prevent erasing a cassette that you wish to keep, remove the safety tab on the upper edge of the cassette. To record a cassette, where the tab has been broken, simply cover the opening with adhesive tape. When you have finished playing a cassette, always put it back in its case. Store your cassettes in a clean place, out of direct sunlight, where they will not be exposed to high temperatures. Avoid using 120-minute cassettes as they place unnecessary strain on the tape mechanism. Handle your compact discs with care. Always hold them by the edges to avoid leaving fingerprints on the shiny surface. When you have finished playing a compact disc, always put it back in its case. Do not fix paper or adhesive tape to the discs and do not write on the label. Clean them with a special-purpose cloth. Store your compact discs in a clean place, out of direct sunlight, where they will not be exposed to high temperatures. Always use compact discs marked . Precautions When Using Compact Discs Precautions When Using Audio Cassettes COMPACT DIGITAL AUDIO It always takes a little time to become familiar with a new appliance. If you have any of the problems listed below, try the solutions given. They may save you the time and inconvenience of an unnecessary service call. If the above guidelines do not allow you to solve the problem, take a note of: The model and serial numbers, normally printed on the rear of the system Your warranty details A clear d...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - MM-J5 (4.37 mb)