Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Samsung Dateigröße: 1.29 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Stereoanlage - MM-E330 (1.56 mb)

Stereoanlage - MM-E330 (1.28 mb)

Stereoanlage - MM-E330 (907.14 kb)

Stereoanlage - MM-E330 (1.58 mb)

Alle anzeigen

Stereoanlage - MM-E330 (987.93 kb)

Stereoanlage - MM-E330 (1.33 mb)

Stereoanlage - MM-E330 (1.32 mb)

Stereoanlage - MM-E330 (1 mb)

Stereoanlage - MM-E330 (1.25 mb)

RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak. About RDS DISPLAY function(Optional) You can see the RDS signals the station sends on the display. Press the RDS DISPLAY button while listening to an FM station. Each time you press the button, the display change to show you the following information : PS NAME ; RT; CT ; Frequency • When pressing the buttons on the primary remote control, make sure that you have selected the FM station using the primary remote control. 1. Press the RDS PTY button while listening to an FM station. 2. Press the TUNING/ALBUM ,or . buttons until the PTY code you want appears on the display. • The display gives you the PTY codes described to the right. 3. Press the RDS PTY button again, while the PTY code selected in the previous step is still on the display. • The centre unit searches 30 preset FM stations, stops when it finds the one you have selected, and tunes in that station. Setting the Clock For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. 1. Switch the system on by pressing the POWER button. 2. Press TIMER/CLOCK button and then press the ENTER button,"CLOCK” is displayed. 3. Press ENTER,the hour flashes. ..Increase the hours:,. ..Decrease the hours:.. 4. When the correct hour is displayed, press ENTER, the minutes flashes. ..Increase the minutes:,, ..Decrease the minutes:.. 5. When the correct minute is displayed, press ENTER, "TIME" appears in the display. .. The current time is set now. ..You can display the time, even when you are using another function, by pressing the TIMER/CLOCK button once. ..You can also use [ or ] on the top panel instead of TUNING/ALBUM ,or . buttons in step 3,4. PS (Program Service) While searching, appears and then the station names will be displayed. appears if no signal is sent. RT(RadioText) While searching, appears and then text messages the station sends will be displayed. appears if no signal is sent. CT (Clock Time) Decodes the real time clock from the FM frequency. Some stations may not transmit PTY, RT or CT information therefore this may not be displayed in all cases. Frequency Station frequency (non-RDS service) About characters shown in the display When the display shows PS,or RT signals,the following characters are used. ..The display window cannot differentiate upper case and lower case letters and always uses upper case letters. ..The display window cannot show accented letters, for instance, may stands for accented like .. PTY(Program Type) indication and PTY-SEARCH function(Optional) One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes. To search for a program using the PTY codes Before you start! • The PTY Search is only applicable to preset stations. • To stop searching any time during the process, press the STOP button while searching. • There is a time limit in doing the following steps. If the setting is cancelled before you finish, start from step 1 again. Record Function You can record the audio of a CD/Radio or external music player to a USB storage device. 1. Connect the USB device to the USB port () of the main unit. 2. Play CD/Radio to record, or connect the external device to the main unit. - CD ..Press F() on the top panel to select MP3/ CD. ..Press OPEN/CLOSE button to open the disc tray. ..Insert a CD and press OPEN/CLOSE button to close the disc tray. ..Press [ or ] to play a desired music. - FM Tuner .. Use the F() button to select FM mode. .. Select a radio frequency to record. - External Device ..Connect the external device (MP3 player) to the product. ..Press F() button to select AUX mode. ..Play the music file in the external device. 3. Press the USB REC button to start recording. - CD ..“TRACK RECORDING” is displayed and CD recording starts. ..Press and hold the USB REC button to start recording the all tracks of Disc. "FULL CD RECORDING" is displayed. ..If you record the MP3 , the file is copied into the USB device totally. “STOP”.“COPY XX”.“COPY END” is displayed. When the recording is done, “STOP” will be displayed. ..If there is the same file name, “STOP”."FILE EXIST" is displayed, and the function is canceled. - FM /External Source ..RECORDING is displayed. 4. Press STOP (@) to stop playing. Then, a mp3 file will be created accordingly. 5. To remove the USB storage device safely, press STOP (@) again. ..After the recording, a directory named “RECORDING”(CD), “CD COPY”(MP3 CD), “TUNER RECORDING” or “AUX RECORDING” will be created in your device. ..Do not disconnect the USB or the AC Cord during the recording as this may cause file damage. ..If you disconnected USB device during the recording, the main unit will be power off and you may not delete the recorded file, In this case, please connect the USB device to t...

Herunterladen

Geben Sie zwei Ziffern: