Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Load the selected CD. 2 3 Press PROGRAM/SET. Result: The following indications are displayed: (01 = Program no., -- -- = Track no. on the disc) Select the required track by pressing: 4 to move back through the tracks to move forward through the tracks Press PROGRAM/SET to confirm your selection. 5 Result: The selection is stored and is displayed. To select other tracks, repeat Steps 4 to 5. 6 Press CD (v/») to listen to the track selection in the order programmed. 7 To... Press... 8 Listen to the current track again once Listen to the previous track twice Listen to the next track once Skip forwards or backwards or the appropriate one or more tracks number of times To cancel the selection, press button. 9 Once if the compact disc player is stopped Result: PROG is no longer displayed. If you open the compartment, the selection is cancelled. You can check or change your selection of tracks at any time. Press once if you have started listening to the selection. 1 2 Press PROGRAM/SET button twice. Result: The following indications are displayed: (01 = Program no., – – = Track no. on the disc) If you have already programmed 24 tracks, Check is displayed instead of CH when you press PROGRAM/SET. Press PROGRAM/SET one or more times until the track to be 3 changed is displayed. Press or to select a different track. 4 Press PROGRAM/SET to confirm your change. 5 Press CD (v/») to start listening to the selection. 6 Result: The first track selected is played. 6 2,3,5 14 4 3,5 7 1, 9 4,8 4,8 14 GBYou can listen to a stored radio station as follows: Switch the system on by pressing ( ) . Select the required frequency band by pressing TUNER/BAND on the front panel. Select the radio station as follows. To listen to ... Press ... Stored station 1. the TUNING MODE button until “PRESET” is displayed. 2. or button to select the Selecting a Stored Station 1 2 3 You can listen to a stored radio station as follows: Switch the system on by pressing ( ) . Select the required frequency band by pressing TUNER/BAND on the front panel. Select the radio station as follows. To listen to ... Press ... Stored station 1. the TUNING MODE button until “PRESET” is displayed. 2. or button to select the Selecting a Stored Station 1 2 3 required program. 1 3 2 3 3 Improving Radio Reception You can improve the quality of radio reception by: Rotating the FM or AM(MW) aerial If reception from a specific FM radio station is poor, press MO/ST. to switch from stereo mode to mono. The quality of the sound will be improved. 1 2 3 4 5 6 Searching for and Storing the Radio Stations You can store up to: 15 FM stations 8 MW stations 7 LW stations Switch the system on by pressing ( ). Select the required frequency band by pressing TUNER/BAND again on the front panel or BAND on the remote control. Result: The appropriate indication is displayed: FM Frequency Modulation MW Medium Wave LW Long Wave To search for a Press TUNING MODE station... Manually One or more times until MANUAL is displayed. Automatically One or more times until AUTO is displayed. PRESET function is explained in detail in the section “Selecting a Stored Station” on. Select the station to be stored by: Pressing or buttons on the front panel or or buttons on the remote control to increase or decrease the frequency respectively. To scroll through the frequencies faster when searching manually, hold down the or buttons. The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode. If you do not want to store the radio station found, revert to Step 4 and search for another station. Otherwise: a Press PROGRAM/SET. Result: The PROG is displayed for a few seconds. b Pressing or buttons on the front panel or or buttons on the remote control to assign a program number . c Press PROGRAM/SET to store the radio station. Result: PROG is no longer displayed and the station is stored. To store any other radio frequencies required, repeat Steps 3 to 5. The PROGRAM function can be used to assign a new station to an existing program number. 4 5 2 3 4 5 2 5 4 5 4 5 3 15 About RDS broadcasting About RDS DISPLAY function About RDS DISPLAY function GB This unit has the RDS (Radio Data System) function, which enables for About "PS NAME" MODE the various information such as broadcasting station, radio text, time and 30 types of programs (News, Rock, Classic, etc.) to be received Displays the name of broadcasting station. from the FM RDS station together with normal radio signal. Press the RDS DISPLAY button to select the PS NAME. "PS NAME" appears on the display. If the PS information is being received, the PS name (BBC, AFO, NDR, etc.) is shown on the display. If the PS information isn't received, the original FM frequency is shown. Even though no RDS DISPLAY button is pressed, the reception of PS information ensues the PS name is displayed. About 'RT' MODE Displays the character transmitted from the broadcasting station. Press the R...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - MM-ZJ8BK (2.46 mb)