Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Aiwa Dateigröße: 322.34 kb Dateiname: Unterrichtssprache:

COPYRIGHT Please check the copyright laws relating to recordings from disc, radio or external tape for the country in which the machine is being used. If an erroneous display or malfunction occurs Make sure that none of the deck operation buttons is pressed. Press swhile pressing TAPE/POWER/6STANDBY. If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display. Leave the unit for a while and turn the power back on. En ENGLISH 7 TAPE/POWER/ 6STANDBY RADIO/BAND QSOUND T-BASS r, t CD VOLUME N, M REPEAT/SLEEP 3-MODE EQUALIZER s STOP/MEMORY C PAUSE STOP/EJECT FF REW PLAY REC DISPLAY EQ VOL i, kr, t (CSD-TD66 only) TAPE/POWER/ 6STANDBY RADIO/BAND QSOUND T-BASS r, t CD VOLUME N, M REPEAT/SLEEP 3-MODE EQUALIZER s STOP/MEMORY C PAUSE STOP/EJECT FF REW PLAY REC DISPLAY EQ VOL i, kr, t (CSD-TD66 only) TAPE OPERATIONC Use Type I (normal) tapes only. INSERTING A TAPE Press ZSTOP/EJECT to open the cassette holder and insert a tape with the exposed side up and the side to be played facing out. Push the cassette holder to close. PLAYING A TAPE Press xPLAY while the power is off. The power is turned on and play of the inserted tape begins. The volume level is displayed during tape operation. ZSTOP/EJECT – Stops play. The power will be automatically turned off. aPAUSE – Pauses play. To resume play, press again. fFF/ gREW – Fast forwards/ rewinds. To stop the winding, press Z. To prevent accidental erasure Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording. To record on the tape again Cover the tab openings with adhesive tape, etc. Side A Tab for side A RECORDING Note that recording is done on only one side of the tape. 1 Insert a tape with the side to be recorded facing out. 2 Get ready to record from the source. To record from a CD, press CD and load the disc. To record from a radio broadcast, press RADIO/ BAND and tune to a station. 3 Press wREC to start recording. xPLAY is pressed simultaneously. When the selected function is CD, CD play and recording starts simultaneously. To record only the selected tracks of a CD 1 Follow steps 1 to 4 of PROGRAMMED PLAY on page 7 to program tracks. 2 Press wREC. To stop recording, press ZSTOP/EJECT. To stop CD play, press sSTOP/MEMORY. To pause recording, press aPAUSE. To resume recording, press again. To erase recording, press wREC while the power is off. After recording, press TAPE/POWER/6STANDBY to turn the power off. 8 ENGLISH GENERAL GENERAL SOUND ADJUSTMENT Volume or tone adjustment does not affect recording. VOLUME (VOL) Press VOLUME Nor M. The volume level is displayed as a number from 0 to MAX (25). • The volume level is automatically set to 14 if the power is turned off when the volume level is set to 15 or more. (except when turning the power back on within 4 seconds) • Pressing DISPLAY on the remote control displays the adjusted volume level (CSD-TD66 only). 3-MODE EQUALIZER Press *3-MODE EQUALIZER repeatedly until the desired mode is displayed. The equalizer mode changes to R (Rock), P (Pop), J (Jazz) or no equalization, cyclically. Rock - Emphasizes the high and low range of music. Pop - Emphasizes voice and midrange of music. Jazz - Emphasizes the low range of music. * or EQ on the remote control (CSD-TD66 only) T-BASS system The T-BASS system enhances the realism of low- frequency sound. Press T-BASS and the T-BASS indicator lights up. QSOUND system This system provides a rich, three dimensional sound area for stereo sources. You can enjoy more enhanced sound. Press QSOUND and the QSOUND indicator lights up. • At higher volumes, turning QSOUND on may cause sound distortion. In this case, make the volume down. SETTING THE SLEEP TIMER The unit can be turned off automatically at a specified time. 1 Keep REPEAT/SLEEP pressed until “30” flashes in the display. 2 Within 4 seconds, press ror tto specify the time until the power is turned off. Each time it is pressed, the time changes between 10 and 90 minutes in 10-minute steps. Specified time While the sleep timer works, the dot keeps flashing. To check the time remaining until the power is turned off Repeat step 1 shown above. The remaining time is displayed for 4 seconds. To cancel the sleep timer Display the remaining time and press ror t repeatedly until OFF is displayed. NOTE If the unit is turned off during tape playback, xon the deck will not be released. Press Zto release x. En Maintenance To clean the cabinet Use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or thinner. To clean the heads When the tape heads are dirty; -high frequency sound is not emitted -the sound is not adequately high -the sound is off-balance -the tape cannot be erased -the tape cannot be recorded on After every 10 hours of use, clean the tape heads with a head cleaning cassette. Use separately sold dry-type or wet-type cleaning cassette. Refer to the instructions of...

Herunterladen

Geben Sie zwei Ziffern: