Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Panasonic Dateigröße: 1.68 mb Dateiname: SCAK25.PDF Unterrichtssprache:

Never use an outdoor antenna during an electrical storm. flátecmaD cDifiJ connection »For details, refer to the instruction manual of the units which are to be connected. •This example shows how to connect an analog player with the PHONO OUT/LINE OUT switch. •When units other than those described below are to be connected, please consult with your audio dealer. •Only an analog player with a built-in phono equalizer can be connected. • Set the switch to the “LINE OUT” position at the back of the analog player. 7 Before using Front panel controls Main unit □ No. Name Ref. page © Power “STANDBY (!)/0N” switch (POWER, STANDBY 6/ON)...... ....... 10 Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount ol power. © Disc tray (3) Disc select buttons and indicators (DISC 1-DISC 5)............... ....... 13 @ CD manager button (CD MANAGER)................ ____ 17,23 © Disc tray open/close button (^ OPEN/CLOSE).............. ....... 13 @ Disc check open button (^ NEXT OPEN)............... ....... 13 © Random play button (RANDOM) . . ....... 15 Center console E No. Name Ref. page © Clock/timer button (CLOCK/TIMER)................ . 10,28,29 ® AUX button (AUX).............. ....... 31 ® Tape/deck select button (TAPE, DECK 1/2).............. ....... 18 © CD button (CD)................ ....... 14 @ Tuner/band select button (TUNER, BAND)................ ....... 11 © Display © Volume control (VOLUME)....... ....... 12 © Play timer/record timer button (© PLAY/O REC)............... ____ 28,29 © Basic operating buttons Functions change according to the source. © Deck 1 open button (^ OPEN, DECK 1)............. ....... 18 © Tape edit button (TAPE EDIT) .. .. ....... 24 © Recording start/stop button «© REC/STOP)................. ....... 21 @ Reverse mode select button (REV MODE).................. ....... 18 @ Deck 2 open button (^ OPEN, DECK 2)............. ....... 18 © © @® © @ Front panel controls Main unît (continued) El No. Name Ref. page 0 Display select/demonstration button (-DISPLAY/-DEMO)............... .. 10,32 @ Deck 1 cassette holder............ ..... 18 (3) Acoustic image equalizer display (Al EQ)......................... ..... 26 @ Sound equalizer control/indicators (SOUND EQ).................... ..... 25 (5) Super woofer on/off button (S. WOOFER).................... ..... 25 © Headphone jack (PHONES)........ ..... 31 0 Deck 2 cassette holder............ ..... 18 Remote control iE Buttons such as 0 function in exactly the same way as the buttons on the main unit. No. Name Ref. page ® Sleep button (SLEEP)............. ..... 31 © Power button (POWER)........... ..... 10 © Numeric buttons................. ..... 16 © Program button (PROGRAM)....... ..... 16 @ Cancel button (CANCEL).......... ..... 16 ® Input selection buttons (AUX, TAPE, CD, TUNER)...... 11,14,18,31 © Muting button (MUTING).......... ..... 32 © EH)............... .. 14,19 @ >/00/a button (O/DD/a).......... 12,14, 18 @ Stop button (ED).................. .. 14,18 © Volume buttons (— VOLUME +) .... ..... 12 R T) l~ h 4 l~l ±11— II (_« m I I )~l i~ I / >_ t_ l_i )_ r ■ r~f )/•“}( »■'1 ill—' Demo function EJ When the demo function is activated, a demonstration of the spectrum analyzer using space travel images is shown on the display panel. Turning the demo function ON/OFF Press POWER and hold down DISPLAY/DEMO. Every time you hold down the button; DEMO (ON). ► NO DEMO (OFF) When the demo function is ON, the demo is played automatically in the following cases. oWhen system is ON If the input source is set to CD or tape, and the system is left on standby for more than 2 minutes •When system is OFF If the clock has not been set Setting the time E This is a 12-hour display clock. This example in the figure shows how to set the time for 4:25 p.m. a Switch on the power. U1 Press CLOCK/TIMER to select “CLOCK”. Every time you press the button; CLOCK—►© PLAY—>© REC t—Previous display<-1 □ (within 7 seconds or so) Press v or a to show the present time. P| Press CLOCK/TIMER to finish setting the time. The display will return to whatever was displayed before you set the time. To display the time when power is ON Press CLOCK/TIMER to select “CLOCK”. The time will be displayed for about 5 seconds and then the display will return to whatever was previously displayed. Presetting radio broadcasts BAND t~ hi l~t ~l )~i >" I I U I. _( / “ \ / TWEMODfc \ h it (~l h I I I i~l I I I I I I V l_f / I l_ M n n I r I I (_f u. I...

Herunterladen

Geben Sie zwei Ziffern: