Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Alpine
Dateigröße: 519.3 kb
Dateiname: 99364864-e1a9-0284-c9d8-6c6e4be87ba8.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
Controlling CD Changer (Optional) If an optional Alpine 6-disc CD Changer is connected to the 8-pin DIN connector (M-Bus) of the CDM-7892R, you can control the CD Changer using the CDM-7892R. NOTE The CD controls on the CDM-7892R for the CD Changer operation are functional only when the CD Changer is interconnected with the CDM-7892R. 1 Press the SOURCE button to activate the CD Changer. The display shows the disc number and track number. NOTE To start play or pause play, press the :/J button. 2 Make sure that the "FUNC" indicator light goes out, then press the Preset buttons to select the desired disc loaded in the CD Changer. NOTES • After selecting the desired disc, you can operate in the same way as for the CD player. For details, please see the CD Operation section. • If the "FUNC" indicator is illuminated the Disc Select buttons become nonfunctional. 16-EN SETUP Operation g DN BAND Rotary encoder/MODE f UP SETUP Adjusting Source Signal Levels If the difference in volume level between the CD player and FM radio is too great, adjust the FM signal level as follows. 1 Press and hold the SETUP button for at least 3 seconds. 2 Press the g DN or f UP button to select the FMLV (FM LEVEL) mode. 3 Press the BAND button to select the FM signal level HI (High) or LO (Low) to make the signal levels between the FM band and CD player closer. 4 Press the SETUP button to return to normal mode. Switching the Tuner Mode The CDM-7892R incorporates the MAX TUNE Pro for the highest quality tuner audio. Moreover, you can choose between 3 settings to suit your own personal sound preferences usage. 1 Press and hold the SETUP button for at least 3 seconds. 2 Press the g DN or f UP button to select NORMAL. 3 Press the BAND button to switch the TUNER mode. > NORMAL > STABLE > HI-FI NORMAL : Standard setting STABLE : Noiseless priority setting HI-FI : Sound quality priority setting NOTES • The initial setting at the factory is "NORMAL." • If you find the sound is very noisy while listening to the tuner in the HI-FI mode, we recommend you change to the NORMAL mode. 4 When the setting is completed, press the SETUP button to return to the normal mode. Subwoofer On and Off 1 Press and hold the SETUP button for at least 3 seconds. 2 Press the g DN or f UP button to select the SUB-W mode. 3 Press the BAND button to select Subwoofer ON or OFF. 4 Press the SETUP button after setting the SUB-W ON. 5 Press the MODE button repeatedly to select the SUB-W mode. > SUB-W > BALANCE VOLUME < DEFEAT < FADER < Press the g DN or f UP button after selecting the SUB-W mode, and the subwoofer output phase is toggled SUBW NOR (0°) or SUBW REV (180°). 6 Turn the Rotary encoder until the desired sound is obtained in each mode. NOTES • Initial mode is "Subwoofer ON." • Set to "Subwoofer OFF" unless the subwoofer is used. Setting Frequency Step When you tune in FM stations automatically, you can set the frequency step to 50 kHz or 100 kHz. 1 Press and hold the SETUP button for at least 3 seconds to enter the setting mode. 2 Press the g DN or f UP button to select the frequency step mode. 3 Press the BAND button to select the desired frequency step (50 kHz or 100 kHz). Each time you press the BAND button, 50 kHz and 100 kHz appear alternately. 50 kHz: the unit tunes in FM stations every 50 kHz automatically. 100 kHz: the unit tunes in FM stations every 100 kHz automatically. 4 Press the SETUP button to exit the setting mode. 17-EN SETUP Operation SOURCE BAND g DN f UP SETUP Setting the AUX Mode You can input TV/video sound by connecting an optional "M-Bus V-Link" (M-Bus/RCA interface cable KCM-122B) to this component. 1 Press and hold the SETUP button for at least 3 seconds. 2 Press the g DN or f UP button to select the AUX mode. 3 Press the BAND button to toggle the mode between AUX ON and AUX OFF. 4 Press the SETUP button to return to normal mode. 5 To adjust the volume, etc., first press the SOURCE button and select the AUX mode, then make the necessary adjustment. > TUNER > CD > AUX NOTE When AUX ON is selected, a CD Changer cannot be used. Demonstration This unit has the Demonstration feature which simulates the display functions on the display panel. 1 Press and hold the SETUP button for at least 3 seconds. 2 Press the f UP or g DN button to select the "DEMO" mode. 3 Press the BAND button to turn on or off the DEMO mode. Each press toggles between "DEMO ON" and "DEMO OFF." If no buttons are pressed 30 seconds after the DEMO mode is turned ON. The DEMO mode then begins. NOTE The initial setting at the factory is "DEMO ON." 4 Press the SETUP button again to return to normal operation. 18-EN Information In Case of Difficulty If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alp...