Stimmen - 4, Durchschnittliche Bewertung: 4.8
(
)
)
|
Anleitung Zusammenfassung
-The Leader in DJ Technology ©2000 Industries - 9 - PRO TT-2 Turntable GENERAL OPERATING INSTRUCTIONS 1. Turn the power dial to turn on and the speed indicator and the strobe-illuminator will light up. 2. Turn on and raise the target light for illuminating the stylus tip by pushing the target light button. 3. Place a record on the turntable mat. When playing a 45rpm record with a large center hole; place the 45rpm adapter on the center spindle. 4. Set the rotation speed (33/45/78) to match the record. 5. Release the arm clamp. 6. Set the cueing lever to the up position. 7. Press the Start/Stop button and the turntable platter will start to rotate. 8. Move the tonearm over the desired groove. 9. Set the cueing lever to the down position, the tonearm will descend slowly onto the record and play begins. 10. Set the desired pitch adjust range by depressing the QUARTZ button until the desired pitch is reached. Options are +/-10% or +/-20%. 11. Adjust the pitch to a desirable speed. During play, observe the strobe dots. If the strobe dots appear to the right, the pitch is slower than the rated speed. If they flow to the left, the pitch is faster than the rated speed. If the strobe dots appear stationary, which means the platter is in normal turntable speed, move the pitch control slider up or down to adjust the speed. 12. To suspend play, lift tone arm with cueing lever. 13. When play is finished, raise the cueing lever, move the tonearm to the armrest and secure the tonearm with the arm clamp. 14. Turn off the target light off by pushing the light back down. 15. Press the Start/Stop button to stop the platter rotating. 16. Turn the power dial to turn off the power. MAINTENANCE Routine maintenance should be performed by cleaning the stylus periodically with a soft brush to prevent the accumulation of dust. When the sound becomes distorted or noisy, check the stylus. If it is worn out, replace with a new one. From time to time, the dust cover and turntable cabinet should be wiped with a soft, dry cloth. Use of any volatile materials as alcohol, thinner, benzene, etc., may remove the paint or damage the luster and should not be used. -The Leader in DJ Technology ©2000 Industries - 10 - PRO TT-2 Turntable SPECIFICATIONS TURNTABLE SECTION Type 3-speed, full manual Driving method Direct drive Motor 12 Pole, 3 Phase, Brushless DC Motor Turntable platter Aluminum diecast 330mm dia. Turntable speed 33-l/3 , 45, and 78 rpm Pitch Variance ±20% Starting Torque more than 1.0kgf.cm Braking Electronic OUTPUT Wow and flutter < 0.13% S/N ratio > 50dB (DIN-B) Output Difference 2.3dB Channel Separation 16dB Pitch 675±1Hz with 33 1/3 rpm 1170±1Hz with 78 rpm TONEARM SECTION Type Static Balanced S-shaped with detachable headshell Effective length 234mm Overhang 20mm Tracking Force 0-4g Anti-Skate 0-7g Cartridge Weight 6-10g GENERAL Power supply AC110-127V / 220-240V, 50/60Hz Power consumption 15 Watts Dimension (W x D x H) 450 x 352 x 148.5 mm 17 3/4” x 13 3/4” x 5 7/8” Weight 10.3 Kgs 24 lbs. Specifications and design may be changed without notice for improvement -The Leader in DJ Technology ©2000 Industries - 11 - Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long? 1. NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ mixers and amplifiers are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for (2) Years. The warranty is extended to (3) Years with the completion of the warranty card provided that the warranty card is completed and returned within (30) days from the date of purchase. All other NUMARK products are warranted for (1) Year including but not limited to CD players, CD Mix Stations, turntables, preamplifiers, beatkeepers, equalizers, microphones, headphones, cartridges, and all other accessories. What is not covered? This Limited Warranty is conditioned upon proper use of the product by the purchaser. 2. This Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical or electrical stress, modification of any part of the product, or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) all plastic surfaces and other externally exposed parts that are scratched or damaged due to normal use; (d) defects or damage from improper testing, operation, maintenance, installation, adjustment, or service of the mixers; (e) crossfaders. 3. What are NUMARK'S obligations? During the applicable warranty period, NUMARK will repair or replace, at NUMARK'S sole discretion, without charge to the purchaser, any defective component part of the mixer. To obtain service under this Limited Warranty, purchaser must first contact NUMARK and ob...