Stimmen - 6, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
1 Press CLOCK/TIMER SET on the remote to display " DAILY". 2 Press ENTER. "5" indicator lights up and " ON" appears in the display. 3 Press ror tto set the timer start hour, and press ENTER. 4 Press ror tto set the minute, and press ENTER. " OFF" is displayed. 5 Set the time to stop playback by following the same procedures as steps 3 and 4. 6 Press ror tto select the source (CD and TUNER), and press ENTER. Notes Notes The timer playback day at the specified unless you cancel it. •You cannot set the same time on time and timer- off time. " SET NG" is displayed if you do that. In case, reset the time. • The timer playback will not begin unless off first. En CONNECTING COMPUTER Installing the Software on your PC Tip: When you connect a personal see also "Set up Manual" in the supplied CD- Before Starting the Installation Before installing the software on the supplied CD, check to be sure that your system meets system requirements. PC IBM PC/AT compatible Free hard disk space: At least 10 MB USB port En CD-ROM drive Recommended CPU: MMX Technology Pentium processor, 266 MHz or greater Operating System Windows 98 Second Edition, Windows 2000 Professional, Windows Millennium Edition, or Windows XP Professional/Home Edition The software is not guaranteed to function in the following system environments. • Operating systems other than Windows, including the Macintosh •Versions of Windows XP other than Professional or Home Edition •Version of Windows 2000 other than Professional •Versions of Windows 98 other than Second Edition •Windows NT, Windows 95 • Systems in which a preinstalled Windows 3.1/95/98 operating system has been upgraded • Connecting by way of the USB hub NOTE The software is not meeting the system requirements. • IBM and PC/AT are registered trademarks of International Business Machines • MMX and Pentium are trademarks or trademarks of Intel Corporation. • Microsoft and Windows are trademarks of the Microsoft Corporation registered in the US and countries. • The USB port of this unit is joint development of Sony Corporation and Micronas Semiconductor Holding AG. • Other system names and product names mentioned herein are generally registered trademarks or trademarks of their respective owners. However, the ™ and ® marks are not used in this Installation Guide. Installing the USB Driver First, install the USB driver. You must log in to Windows XP or Windows 2000 as a user with Administrator privileges in order to install the software. 1 Power the PC on and start Windows. 2 Turn the unit to on. 3 Insert the supplied BMZ USB Driver CD into the CD-ROM drive of your PC. The installer starts automatically, and the Installation Guide screen appears. If the installer does not start automatically, locate the CDROM drive of your PC in the My Computer folder, and double click AIWAMENU on the CD-ROM. 4 Click “BMZ USB Driver”. 5 Select a display installer, and click “OK”. The explanations of step have chosen English as the 6 Read the license agreement, A message appears asking you to 7 Connect this unit to the PC with a Type B USB cable (supplied) Front panel of the unit PC Type A 8 Press FUNCTION repeatedly until “USB” appears in the display window of this unit. 9 Complete the installation by following the instructions on the screen. If your operating system is Windows XP, a message may appear to the effect that the software being installed has not been certified for the Windows logo mark. This message can be safely ignored. Click “Continue” and continue with the installation. 10 When a message appears to inform you that the installation is complete, click “Close”. You are returned to the Installation Guide initial screen. If your operating system is Windows 98 or Windows Me, restart your PC at this point. Depending on your computer, operating system installation CD-ROM may be needed. In that case, insert it as instructed. To check the installation of the USB driver To check the installation of the USB driver 1 Click “Start” > “Settings” > “Control . 2 In the “Control Panel” window, double click “System” . 3 In the “System Properties” window, double click “Device Manager”. 4 Check that the following devices are displayed following headings. •“ Sound, video and game controllers” > “USB Audio Device” • “Universal Serial Bus controllers” > “AIWA BMZ USB- Device” • “Human Interface Devices” > “HID-compliant consumer control device” If these devices do not appear, the USB driver has not been recognized. Reinstall the USB driver. If your operating system is Windows 2000 Professional or Windows XP Professional/Home Edition 1 Click “Start” > “Settings” > “Control Panel” . 2 In the “Control Panel” window, double click “System” . 3 In the “System Properties” window, click the “Hardware” tab. 4 Click “Device Manager” to open the “Device Manager” window. 5 Select “View” > “Devices by type”. 6 Check that the following devices are displayed under the following headings. • “Sound, video and game controllers” > “USB Audio Dev...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - BMZ-K2 (628.5 kb)