Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Delfield Dateigröße: 539.03 kb Dateiname: Unterrichtssprache:

Be sure to press the plug buttons firmly into the holes. 6. Lay the cabinet on its side down on the floor. Remove the two screws that hold the bottom hinge to the cabinet using a 10MM socket. Keep these screws and washers for later use. 9 7. Insert the bottom hinge at the left side using the two screws previously removed in step 6. NOTE: Do not tighten screws. 8. Stand the cabinet. 9. Replace the door making sure the bottom socket enters the bottom hinge pin. Be sure washers are in place. 10. While holding the door in the closed position, secure the top hinge at the left side using the two screws previously removed at the beginning in step 2. Do not tighten the screws until the top of the door is leveled with the top cabinet. 11. Replace the hinge cover. 12. Tools required: -8MM & 10MM socket-ratchet -Putty knife or thin-blade screwdriver 10 >■ Cleaning Your Refrigerator • Turn the temperature control to "OFF’, unplug the refrigerator, and remove the food, shelves, and trays. • Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. • Wash the shelves and trays with a mild detergent solution. • The outside of the refrigerator should be cleaned with mild detergent and warm water. • Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts. • Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth. > Vacation Time • Short vacations: Leave the refrigerator operating during vacations of less than three weeks. • Long vacations: If the appliance will not be used for several months, remove all food and unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly: blocking it open if necessary. > Moving Your Refrigerator • Remove all the food. • Securely tape down all loose items inside your refrigerator. • Turn the leveling screws up to the base to avoid damage. •Tape the door shut. • Be sure the refrigerator stays secure in the upright position during transportation. Also protect outside of refrigerator with a blanket, or similar item. > Energy Saving Tips • The refrigerator should be located in the coolest area of the room, away from heat producing refrigerator or heating ducts, and out of the direct sunlight. • Let hot foods cool to room temperature before placing in the refrigerator. Overloading the refrigerator forces the compressor to run longer. • Be sure to wrap foods properly, and wipe containers dry before placing them in the refrigerator. This cuts down on frost build-up inside the refrigerator. • Refrigerator storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the refrigerator less efficient. • Organize and label food to reduce door openings and extended searches. Remove...

Herunterladen

Geben Sie zwei Ziffern: