1 MVP-7500 Wireless Touch Panel (FG5965-01) ATTENTION! Verify the NetLinx Master Firmware is build 117 or greater for the ME260 and NI-Series Controllers. Verify the TPDesign4 program being used is Version 2.2 or higher. Earlier versions of the Master firmware and TPD4 software are incompatible with these panels. Overview The AMX MVP-7500 panel (FG5965-01) uses an internal wireless compact flash card to communicate with a NetLinx Master via an off-the-shelf 802.11b Wireless Access Point. MVP uni

Any implied warranties on the SOFTWARE and hardware are limited to ninety (90) days and one (1) year, respectively. Some states/countries do not allow limitations on duration of an implied warranty, so the above limitation may not apply to you. CUSTOMER REMEDIES. AMX Corporation’s entire liability and your exclusive remedy shall be, at AMX Corporation's option, either (a) return of the price paid, or (b) repair or replacement of the SOFTWARE that does not meet AMX Corporation's Limited Warranty

COMPATIBILITY • Axcess, NetLinx, and Landmark systems (AXlink is the most common control standard for this system) INSTALLATION KIT • 4-pin AXlink data/power connector • 4-#4-40 machine screws and threaded inserts • Drywall clip set (2-drywall clamps and 2-#8 (2’ long) screws) INSTALLATION CUTOUT • Cutout template for the AXD-CP4 is available as an insert in the product packaging and from AMX as a drawing. This profile provides 1:1 cutout dimensions for the CP4 conduit/wallbox OPTIONAL ACCESSORI

Take control by navigating bright, colorful menus and pressing illuminated command buttons located below the display screen. Intelligent light and motion sensors recognize when to adjust screen brightness to help eliminate glare and will instantly turn on the panel as you approach. The AMX 4" Color Wall Panel (AXD-CP4) mounts easily to a wall, lectern or any flat surface. Just attach the optional wallbox (CB-CP4) into a surface and snap in the touch panel for simple, seamless installation. 4" co

It's massive appeal includes quality graphics capabilities, a high-resolution touch screen,a stylish panel design, and low-cost practicality. CONTROL OPTIONS In addition to providing infrared (IR) support, the ViewPoint is available in 1-way and 2-way radio frequency (RF) models. The 1-way ViewPoint is an economical solution for basic control requirements. The 2-way ViewPoint delivers information back to the user as to the current status of the AMX Control System, as well as the ability to use i

This is the only method of programming the TPI/3 using Serial Commands. • AXlink connection: Connect a DB-9 cable from your PCCOM port to the Programming port on the Controller. Then use an AXlink cable to connect the AXlink connector on the Controller to the AXlink connector at the rear of the AXB-TPI/3. This is the only method of programming the interface unit using Send_Commands. Included Accessories • Two rack-mount ears and a package of rack screws • One 4-pin AXlink connector • One 2-pin P

Name Red Green Blue 00 Very Light Red 255 0 0 01 Light Red 223 0 0 02 Red 191 0 0 03 Medium Red 159 0 0 04 Dark Red 127 0 0 05 Very Dark Red 95 0 0 06 Very Light Orange 255 128 0 07 Light Orange 223 112 0 08 Orange 191 96 0 09 Medium Orange 159 80 0 10 Dark Orange 127 64 0 11 Very Dark Orange 95 48 0 12 Very Light Yellow 255 255 0 13 Light Yellow 223 223 0 14 Yellow 191 191 0 15 Medium Yellow 159 159 0 16 Dark Yellow 127 127 0 17 Very Dark Yellow 95 95 0 18 Very Light Lime 128 255 0 19 Light Lim

For a personal computer to establish a connection to a Modero panel via USB, the target computer must have the appropriate AMX USB driver installed. This installation is bundled into the latest TPDesign4 software setup process or can be downloaded independently from the main Application Files page on Step 1: Setup the Panel and PC for USB Communication 1. If you do not currently have the latest version of TPDesign4, navigate to > Tech Center > Downloadable Files > Application Files > NetLinx Des

23 DHCP............................................................................................................................ 23 Configuring Wireless Network Access (MVP-5150 Only)........................................ 23 Step 1: Configure the Device's Wireless IP Settings (MVP-5150 Only)................... 23 Wireless communication using a DHCP Address........................................................... 24 Wireless communication using a Static IP Address.....................

BECAUSE SOME STATES/COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO LICENSEE. • U.S. GOVERNMENT RESTRICTED RIGHTS. The AMX Software is provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph ©(1)(ii) of The Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs ©(1) and (2) of the C